Standard Ignition LX-232 Distributor Ignition Pickup
Distributor Ignition Pickup for Jeep Applications
The Standard Ignition LX-232 distributor ignition pickup is built for Jeep distributor systems that need a clean, consistent trigger signal. It uses copper windings, permanent magnets, and high-temperature enameled wire to support stable signal output and reliable ignition performance.
Compatible with select Jeep Cherokee, Wrangler, CJ5, CJ7, Scrambler, and Wagoneer applications, this LX-232 pickup is a direct-fit electronic ignition service part for distributor-mounted use.
Key Features
- Distributor ignition pickup for distributor-mounted applications
- Copper windings and permanent magnets for strong signal emission
- High-temperature enameled wire for improved insulation
- Female connector with 3 male blade terminals
- Built under Standard Ignition quality control from component to finished part
- Part number LX-232 for easy identification
Detailed Description
The Standard Ignition LX-232 is a distributor ignition pickup engineered for vehicles that rely on a magnetic trigger signal inside the distributor. It is used in Jeep ignition systems where the original pickup has worn, weakened, or stopped sending a consistent signal to the ignition module. This part number LX-232 is a practical replacement for select Jeep Cherokee, Wrangler, CJ7, CJ5, Scrambler, and Wagoneer models, including 1994 Jeep Wrangler with plate and 1994 Jeep Cherokee with U.S. emissions distributor ignition pickup applications.
Standard Ignition manufactures this pickup with copper windings and permanent magnets to help maintain signal strength, while high-temperature enameled wire supports insulation and durability in the distributor environment. This part cross-references NTK 22064 for the same application.
What It Helps Fix
- Intermittent or weak distributor trigger signal
- No-start condition caused by pickup failure
- Misfire or rough running from inconsistent ignition timing input
- Stalling related to a failing distributor ignition pickup
- Hard starting on Jeep Cherokee, Wrangler, and CJ-series vehicles
Installation Notes and Tips
Install the LX-232 in the distributor mounting location and verify connector gender, terminal type, and terminal count before assembly. Confirm the vehicle uses the correct distributor ignition pickup configuration, especially on 1994 Jeep Cherokee U.S. emissions applications and 1994 Jeep Wrangler with plate. Inspect related ignition components, distributor condition, and wiring before final testing.
For fitment, this part fits 1996 Jeep Cherokee; 1984-1985 Jeep Cherokee; 1995 Jeep Cherokee, export; 1994 Jeep Cherokee, compatible with vehicles equipped with U.S. Emissions for Distributor Ignition Pickup; 1994 Jeep Wrangler, w/ Plate; 1987 Jeep Wrangler; 1984-1986 Jeep CJ7; 1984-1985 Jeep Scrambler; 1984-1985 Jeep Wagoneer; 1983 Jeep CJ5, Motorcraft; 1983 Jeep CJ7, Motorcraft; and 1983 Jeep Scrambler, Motorcraft.
Quality Assurance
Standard Ignition applies electronic ignition expertise and in-process quality control from component manufacturing through final assembly. The LX-232 is produced to address common failure points found in original equipment ignition pickups.
Standard Ignition LX-232 Distributor Ignition Pickup
Distributor Ignition Pickup for Jeep Applications
The Standard Ignition LX-232 distributor ignition pickup is built for Jeep distributor systems that need a clean, consistent trigger signal. It uses copper windings, permanent magnets, and high-temperature enameled wire to support stable signal output and reliable ignition performance.
Compatible with select Jeep Cherokee, Wrangler, CJ5, CJ7, Scrambler, and Wagoneer applications, this LX-232 pickup is a direct-fit electronic ignition service part for distributor-mounted use.
Key Features
- Distributor ignition pickup for distributor-mounted applications
- Copper windings and permanent magnets for strong signal emission
- High-temperature enameled wire for improved insulation
- Female connector with 3 male blade terminals
- Built under Standard Ignition quality control from component to finished part
- Part number LX-232 for easy identification
Detailed Description
The Standard Ignition LX-232 is a distributor ignition pickup engineered for vehicles that rely on a magnetic trigger signal inside the distributor. It is used in Jeep ignition systems where the original pickup has worn, weakened, or stopped sending a consistent signal to the ignition module. This part number LX-232 is a practical replacement for select Jeep Cherokee, Wrangler, CJ7, CJ5, Scrambler, and Wagoneer models, including 1994 Jeep Wrangler with plate and 1994 Jeep Cherokee with U.S. emissions distributor ignition pickup applications.
Standard Ignition manufactures this pickup with copper windings and permanent magnets to help maintain signal strength, while high-temperature enameled wire supports insulation and durability in the distributor environment. This part cross-references NTK 22064 for the same application.
What It Helps Fix
- Intermittent or weak distributor trigger signal
- No-start condition caused by pickup failure
- Misfire or rough running from inconsistent ignition timing input
- Stalling related to a failing distributor ignition pickup
- Hard starting on Jeep Cherokee, Wrangler, and CJ-series vehicles
Installation Notes and Tips
Install the LX-232 in the distributor mounting location and verify connector gender, terminal type, and terminal count before assembly. Confirm the vehicle uses the correct distributor ignition pickup configuration, especially on 1994 Jeep Cherokee U.S. emissions applications and 1994 Jeep Wrangler with plate. Inspect related ignition components, distributor condition, and wiring before final testing.
For fitment, this part fits 1996 Jeep Cherokee; 1984-1985 Jeep Cherokee; 1995 Jeep Cherokee, export; 1994 Jeep Cherokee, compatible with vehicles equipped with U.S. Emissions for Distributor Ignition Pickup; 1994 Jeep Wrangler, w/ Plate; 1987 Jeep Wrangler; 1984-1986 Jeep CJ7; 1984-1985 Jeep Scrambler; 1984-1985 Jeep Wagoneer; 1983 Jeep CJ5, Motorcraft; 1983 Jeep CJ7, Motorcraft; and 1983 Jeep Scrambler, Motorcraft.
Quality Assurance
Standard Ignition applies electronic ignition expertise and in-process quality control from component manufacturing through final assembly. The LX-232 is produced to address common failure points found in original equipment ignition pickups.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Distributor Ignition Pickup for Jeep Applications
The Standard Ignition LX-232 distributor ignition pickup is built for Jeep distributor systems that need a clean, consistent trigger signal. It uses copper windings, permanent magnets, and high-temperature enameled wire to support stable signal output and reliable ignition performance.
Compatible with select Jeep Cherokee, Wrangler, CJ5, CJ7, Scrambler, and Wagoneer applications, this LX-232 pickup is a direct-fit electronic ignition service part for distributor-mounted use.
Key Features
- Distributor ignition pickup for distributor-mounted applications
- Copper windings and permanent magnets for strong signal emission
- High-temperature enameled wire for improved insulation
- Female connector with 3 male blade terminals
- Built under Standard Ignition quality control from component to finished part
- Part number LX-232 for easy identification
Detailed Description
The Standard Ignition LX-232 is a distributor ignition pickup engineered for vehicles that rely on a magnetic trigger signal inside the distributor. It is used in Jeep ignition systems where the original pickup has worn, weakened, or stopped sending a consistent signal to the ignition module. This part number LX-232 is a practical replacement for select Jeep Cherokee, Wrangler, CJ7, CJ5, Scrambler, and Wagoneer models, including 1994 Jeep Wrangler with plate and 1994 Jeep Cherokee with U.S. emissions distributor ignition pickup applications.
Standard Ignition manufactures this pickup with copper windings and permanent magnets to help maintain signal strength, while high-temperature enameled wire supports insulation and durability in the distributor environment. This part cross-references NTK 22064 for the same application.
What It Helps Fix
- Intermittent or weak distributor trigger signal
- No-start condition caused by pickup failure
- Misfire or rough running from inconsistent ignition timing input
- Stalling related to a failing distributor ignition pickup
- Hard starting on Jeep Cherokee, Wrangler, and CJ-series vehicles
Installation Notes and Tips
Install the LX-232 in the distributor mounting location and verify connector gender, terminal type, and terminal count before assembly. Confirm the vehicle uses the correct distributor ignition pickup configuration, especially on 1994 Jeep Cherokee U.S. emissions applications and 1994 Jeep Wrangler with plate. Inspect related ignition components, distributor condition, and wiring before final testing.
For fitment, this part fits 1996 Jeep Cherokee; 1984-1985 Jeep Cherokee; 1995 Jeep Cherokee, export; 1994 Jeep Cherokee, compatible with vehicles equipped with U.S. Emissions for Distributor Ignition Pickup; 1994 Jeep Wrangler, w/ Plate; 1987 Jeep Wrangler; 1984-1986 Jeep CJ7; 1984-1985 Jeep Scrambler; 1984-1985 Jeep Wagoneer; 1983 Jeep CJ5, Motorcraft; 1983 Jeep CJ7, Motorcraft; and 1983 Jeep Scrambler, Motorcraft.
Quality Assurance
Standard Ignition applies electronic ignition expertise and in-process quality control from component manufacturing through final assembly. The LX-232 is produced to address common failure points found in original equipment ignition pickups.
