Stant 13349 Engine Coolant Thermostat
OE Type Thermostat for Stable Cooling Control
The Stant OE Type Thermostat 13349 is a 195-degree engine coolant thermostat built to match original equipment design requirements. It uses a durable stainless steel assembly for smooth operation and long service life, making it a direct-fit cooling system service part for a wide range of Chevrolet, Chrysler, Dodge, Pontiac, Ford, GMC, Jeep, and Mercury applications.
For drivers searching for a 195 degree thermostat for Chevrolet Aveo, Dodge Charger, or Chrysler Sebring applications, this OE-style replacement is built around factory-style dimensions and temperature control. The Stant 13349 also replaces part number 45349 for listed applications.
Key Features
- 195 degrees Fahrenheit thermostat opening temperature
- Original equipment design for factory-style cooling system operation
- Durable material construction for long service life
- Stainless steel assembly engineered for smooth performance
- Flange diameter: 1.865 in.
- Height from flange to bottom: 0.77 in.
- Height from flange to top of bridge: 0.8 in.
Product Details
Stant OE Type Thermostat 13349 is built for vehicles that require a 195-degree engine coolant thermostat and OE temperature control. Its design supports consistent coolant flow regulation, helping the engine reach and maintain the intended operating temperature. This part is listed for applications including Chevrolet Aveo, Chevrolet Sonic, Chrysler 300, Dodge Charger, Dodge Magnum, Pontiac G3, and other covered models across the fitment range.
This thermostat is also listed for metal housing applications where noted in the fitment data, including certain Chevrolet Aveo, Aveo5, Pontiac G3, Pontiac Wave, and Pontiac Wave5 applications. This part cross-references 45349 for the same application.
What This Thermostat Helps Address
- Engine running too cool or taking too long to reach operating temperature
- Temperature fluctuation caused by a worn thermostat
- Cooling system service needs on OE-style applications
- Replacement of a thermostat that no longer opens at the correct temperature
- Fitment-specific cooling maintenance for listed Chevrolet, Chrysler, Dodge, and Pontiac vehicles
Installation Notes and Tips
Verify the vehicle’s thermostat temperature requirement before installation and confirm housing style where the fitment notes specify metal housing only or housing exclusion. Match the flange diameter and overall height to the original part when comparing against the removed thermostat. For best results, inspect the cooling system, gasket sealing surfaces, and coolant condition during service.
Compatible With 1971-2012 Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Mercury, Pontiac, Buick, Cadillac, Oldsmobile, and Isuzu applications listed in the fitment data, including 1995-2012 Chevrolet Chevy, 2005-2010 Chrysler 300, and 2006-2010 Dodge Charger.
Quality Assurance
Stant designs this OE Type Thermostat with original equipment-style construction and a stainless steel assembly for consistent operation. The part is engineered to meet the listed 195-degree specification and factory-style fitment requirements for the covered applications.
Original: $11.27
-65%$11.27
$3.94Stant 13349 Engine Coolant Thermostat
OE Type Thermostat for Stable Cooling Control
The Stant OE Type Thermostat 13349 is a 195-degree engine coolant thermostat built to match original equipment design requirements. It uses a durable stainless steel assembly for smooth operation and long service life, making it a direct-fit cooling system service part for a wide range of Chevrolet, Chrysler, Dodge, Pontiac, Ford, GMC, Jeep, and Mercury applications.
For drivers searching for a 195 degree thermostat for Chevrolet Aveo, Dodge Charger, or Chrysler Sebring applications, this OE-style replacement is built around factory-style dimensions and temperature control. The Stant 13349 also replaces part number 45349 for listed applications.
Key Features
- 195 degrees Fahrenheit thermostat opening temperature
- Original equipment design for factory-style cooling system operation
- Durable material construction for long service life
- Stainless steel assembly engineered for smooth performance
- Flange diameter: 1.865 in.
- Height from flange to bottom: 0.77 in.
- Height from flange to top of bridge: 0.8 in.
Product Details
Stant OE Type Thermostat 13349 is built for vehicles that require a 195-degree engine coolant thermostat and OE temperature control. Its design supports consistent coolant flow regulation, helping the engine reach and maintain the intended operating temperature. This part is listed for applications including Chevrolet Aveo, Chevrolet Sonic, Chrysler 300, Dodge Charger, Dodge Magnum, Pontiac G3, and other covered models across the fitment range.
This thermostat is also listed for metal housing applications where noted in the fitment data, including certain Chevrolet Aveo, Aveo5, Pontiac G3, Pontiac Wave, and Pontiac Wave5 applications. This part cross-references 45349 for the same application.
What This Thermostat Helps Address
- Engine running too cool or taking too long to reach operating temperature
- Temperature fluctuation caused by a worn thermostat
- Cooling system service needs on OE-style applications
- Replacement of a thermostat that no longer opens at the correct temperature
- Fitment-specific cooling maintenance for listed Chevrolet, Chrysler, Dodge, and Pontiac vehicles
Installation Notes and Tips
Verify the vehicle’s thermostat temperature requirement before installation and confirm housing style where the fitment notes specify metal housing only or housing exclusion. Match the flange diameter and overall height to the original part when comparing against the removed thermostat. For best results, inspect the cooling system, gasket sealing surfaces, and coolant condition during service.
Compatible With 1971-2012 Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Mercury, Pontiac, Buick, Cadillac, Oldsmobile, and Isuzu applications listed in the fitment data, including 1995-2012 Chevrolet Chevy, 2005-2010 Chrysler 300, and 2006-2010 Dodge Charger.
Quality Assurance
Stant designs this OE Type Thermostat with original equipment-style construction and a stainless steel assembly for consistent operation. The part is engineered to meet the listed 195-degree specification and factory-style fitment requirements for the covered applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE Type Thermostat for Stable Cooling Control
The Stant OE Type Thermostat 13349 is a 195-degree engine coolant thermostat built to match original equipment design requirements. It uses a durable stainless steel assembly for smooth operation and long service life, making it a direct-fit cooling system service part for a wide range of Chevrolet, Chrysler, Dodge, Pontiac, Ford, GMC, Jeep, and Mercury applications.
For drivers searching for a 195 degree thermostat for Chevrolet Aveo, Dodge Charger, or Chrysler Sebring applications, this OE-style replacement is built around factory-style dimensions and temperature control. The Stant 13349 also replaces part number 45349 for listed applications.
Key Features
- 195 degrees Fahrenheit thermostat opening temperature
- Original equipment design for factory-style cooling system operation
- Durable material construction for long service life
- Stainless steel assembly engineered for smooth performance
- Flange diameter: 1.865 in.
- Height from flange to bottom: 0.77 in.
- Height from flange to top of bridge: 0.8 in.
Product Details
Stant OE Type Thermostat 13349 is built for vehicles that require a 195-degree engine coolant thermostat and OE temperature control. Its design supports consistent coolant flow regulation, helping the engine reach and maintain the intended operating temperature. This part is listed for applications including Chevrolet Aveo, Chevrolet Sonic, Chrysler 300, Dodge Charger, Dodge Magnum, Pontiac G3, and other covered models across the fitment range.
This thermostat is also listed for metal housing applications where noted in the fitment data, including certain Chevrolet Aveo, Aveo5, Pontiac G3, Pontiac Wave, and Pontiac Wave5 applications. This part cross-references 45349 for the same application.
What This Thermostat Helps Address
- Engine running too cool or taking too long to reach operating temperature
- Temperature fluctuation caused by a worn thermostat
- Cooling system service needs on OE-style applications
- Replacement of a thermostat that no longer opens at the correct temperature
- Fitment-specific cooling maintenance for listed Chevrolet, Chrysler, Dodge, and Pontiac vehicles
Installation Notes and Tips
Verify the vehicle’s thermostat temperature requirement before installation and confirm housing style where the fitment notes specify metal housing only or housing exclusion. Match the flange diameter and overall height to the original part when comparing against the removed thermostat. For best results, inspect the cooling system, gasket sealing surfaces, and coolant condition during service.
Compatible With 1971-2012 Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Mercury, Pontiac, Buick, Cadillac, Oldsmobile, and Isuzu applications listed in the fitment data, including 1995-2012 Chevrolet Chevy, 2005-2010 Chrysler 300, and 2006-2010 Dodge Charger.
Quality Assurance
Stant designs this OE Type Thermostat with original equipment-style construction and a stainless steel assembly for consistent operation. The part is engineered to meet the listed 195-degree specification and factory-style fitment requirements for the covered applications.
