Stant 13869 Engine Coolant Thermostat
OE Type Thermostat for Stable Cooling
The Stant 13869 OE Type Thermostat is built for drivers who need accurate coolant temperature control and a direct-fit replacement for a wide range of vehicles. With a 195-degree opening temperature, it helps the engine reach and maintain the intended operating range for consistent warm-up and cooling system performance.
Stant’s OE Type Thermostat line focuses on original equipment-style design and durable construction. The stainless steel assembly is engineered for smooth operation, while the long-life material selection supports dependable service in daily driving and higher-mileage applications.
Key Features
- 195-degree thermostat opening temperature
- OE Type Thermostat design for factory-style fit and function
- Durable construction for long service life
- Stainless steel assembly for smooth performance
- Flange diameter: 2.05 in.
- Height from flange to bottom: 0.82 in.
- Height from flange to top of bridge: 0.78 in.
Detailed Description
Part number 13869 is an engine coolant thermostat designed for broad OE-style coverage across import and domestic applications, including many Dodge, Kia, Mazda, Toyota, Honda, Mitsubishi, Hyundai, Chrysler, Ford, Plymouth, and Mercury models. If you are replacing a thermostat on a Kia Sportage, Mazda Miata, or Dodge Caravan, this Stant thermostat provides the 195-degree temperature specification commonly used in factory cooling systems. The OE Type Thermostat design supports direct replacement needs where original-style dimensions and temperature control matter.
This part cross-references replacement number 48319 for the same application. For fitment-based searches, it is a direct option for vehicles such as Fits 2003-2005 Kia Rio, N/A; Fits 1990-1997 Mazda Miata, N/A; and Fits 1986-2000 Dodge Caravan, N/A.
What It Helps Address
- Engine running too cool or taking too long to warm up
- Temperature fluctuations caused by a worn thermostat
- Cooling system service on high-mileage vehicles
- Factory-spec thermostat replacement during radiator or water pump work
- Restoring proper coolant flow control in OE-style applications
Installation Notes and Tips
Verify the 195-degree temperature rating and compare flange dimensions before installation. Confirm the housing style and gasket/seal requirements for your specific vehicle, and inspect the cooling system for contamination, corrosion, or restricted flow before installing the new thermostat. For best results, refill and bleed the cooling system according to the vehicle manufacturer’s procedure after service.
Quality Assurance
Stant designs this OE Type Thermostat with original equipment-style engineering and stainless steel assembly components for smooth operation and durable service. Part number 13869 is built to meet the demands of routine cooling system maintenance across a wide range of compatible applications.
Stant 13869 Engine Coolant Thermostat
OE Type Thermostat for Stable Cooling
The Stant 13869 OE Type Thermostat is built for drivers who need accurate coolant temperature control and a direct-fit replacement for a wide range of vehicles. With a 195-degree opening temperature, it helps the engine reach and maintain the intended operating range for consistent warm-up and cooling system performance.
Stant’s OE Type Thermostat line focuses on original equipment-style design and durable construction. The stainless steel assembly is engineered for smooth operation, while the long-life material selection supports dependable service in daily driving and higher-mileage applications.
Key Features
- 195-degree thermostat opening temperature
- OE Type Thermostat design for factory-style fit and function
- Durable construction for long service life
- Stainless steel assembly for smooth performance
- Flange diameter: 2.05 in.
- Height from flange to bottom: 0.82 in.
- Height from flange to top of bridge: 0.78 in.
Detailed Description
Part number 13869 is an engine coolant thermostat designed for broad OE-style coverage across import and domestic applications, including many Dodge, Kia, Mazda, Toyota, Honda, Mitsubishi, Hyundai, Chrysler, Ford, Plymouth, and Mercury models. If you are replacing a thermostat on a Kia Sportage, Mazda Miata, or Dodge Caravan, this Stant thermostat provides the 195-degree temperature specification commonly used in factory cooling systems. The OE Type Thermostat design supports direct replacement needs where original-style dimensions and temperature control matter.
This part cross-references replacement number 48319 for the same application. For fitment-based searches, it is a direct option for vehicles such as Fits 2003-2005 Kia Rio, N/A; Fits 1990-1997 Mazda Miata, N/A; and Fits 1986-2000 Dodge Caravan, N/A.
What It Helps Address
- Engine running too cool or taking too long to warm up
- Temperature fluctuations caused by a worn thermostat
- Cooling system service on high-mileage vehicles
- Factory-spec thermostat replacement during radiator or water pump work
- Restoring proper coolant flow control in OE-style applications
Installation Notes and Tips
Verify the 195-degree temperature rating and compare flange dimensions before installation. Confirm the housing style and gasket/seal requirements for your specific vehicle, and inspect the cooling system for contamination, corrosion, or restricted flow before installing the new thermostat. For best results, refill and bleed the cooling system according to the vehicle manufacturer’s procedure after service.
Quality Assurance
Stant designs this OE Type Thermostat with original equipment-style engineering and stainless steel assembly components for smooth operation and durable service. Part number 13869 is built to meet the demands of routine cooling system maintenance across a wide range of compatible applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE Type Thermostat for Stable Cooling
The Stant 13869 OE Type Thermostat is built for drivers who need accurate coolant temperature control and a direct-fit replacement for a wide range of vehicles. With a 195-degree opening temperature, it helps the engine reach and maintain the intended operating range for consistent warm-up and cooling system performance.
Stant’s OE Type Thermostat line focuses on original equipment-style design and durable construction. The stainless steel assembly is engineered for smooth operation, while the long-life material selection supports dependable service in daily driving and higher-mileage applications.
Key Features
- 195-degree thermostat opening temperature
- OE Type Thermostat design for factory-style fit and function
- Durable construction for long service life
- Stainless steel assembly for smooth performance
- Flange diameter: 2.05 in.
- Height from flange to bottom: 0.82 in.
- Height from flange to top of bridge: 0.78 in.
Detailed Description
Part number 13869 is an engine coolant thermostat designed for broad OE-style coverage across import and domestic applications, including many Dodge, Kia, Mazda, Toyota, Honda, Mitsubishi, Hyundai, Chrysler, Ford, Plymouth, and Mercury models. If you are replacing a thermostat on a Kia Sportage, Mazda Miata, or Dodge Caravan, this Stant thermostat provides the 195-degree temperature specification commonly used in factory cooling systems. The OE Type Thermostat design supports direct replacement needs where original-style dimensions and temperature control matter.
This part cross-references replacement number 48319 for the same application. For fitment-based searches, it is a direct option for vehicles such as Fits 2003-2005 Kia Rio, N/A; Fits 1990-1997 Mazda Miata, N/A; and Fits 1986-2000 Dodge Caravan, N/A.
What It Helps Address
- Engine running too cool or taking too long to warm up
- Temperature fluctuations caused by a worn thermostat
- Cooling system service on high-mileage vehicles
- Factory-spec thermostat replacement during radiator or water pump work
- Restoring proper coolant flow control in OE-style applications
Installation Notes and Tips
Verify the 195-degree temperature rating and compare flange dimensions before installation. Confirm the housing style and gasket/seal requirements for your specific vehicle, and inspect the cooling system for contamination, corrosion, or restricted flow before installing the new thermostat. For best results, refill and bleed the cooling system according to the vehicle manufacturer’s procedure after service.
Quality Assurance
Stant designs this OE Type Thermostat with original equipment-style engineering and stainless steel assembly components for smooth operation and durable service. Part number 13869 is built to meet the demands of routine cooling system maintenance across a wide range of compatible applications.
