Stant 13908 Engine Coolant Thermostat
Stant OE Type Thermostat 13908 Overview
Stant 13908 is an engine coolant thermostat built to OE-style dimensions and operating temperature for precise cooling system control. It opens at 180 degrees Fahrenheit and uses a stainless steel assembly for smooth operation in service.
For drivers searching for an OE replacement thermostat for Honda Civic or Toyota Corolla cooling system service, this Stant thermostat part number 13908 provides a direct-fit style solution where the application matches the listed specifications.
Key Features
- OE Type Thermostat design for factory-style cooling system performance
- 180 degrees Fahrenheit opening temperature
- Stainless steel assembly for consistent movement and corrosion resistance
- Durable construction for long service life
- Bypass plate diameter: 0.63 in
- Flange diameter without seal: 1.725 in
- Height from flange to bottom: 0.945 in
- Height from flange to top of bridge: 0.72 in
Detailed Description
Stant OE Type Thermostat 13908 is engineered as an original equipment design replacement for vehicles that require a 180 degree engine coolant thermostat with the listed flange and bypass dimensions. The stainless steel assembly supports smooth thermostat movement, while the durable material construction is intended to hold up to repeated heat cycles in everyday cooling system operation. If you are servicing a Honda Civic, Toyota Corolla, or another application that calls for this specification set, part number 13908 is built to match the required thermostat profile.
Stant’s OE Type Thermostat line focuses on factory-style fit and function, making it a practical choice for cooling system maintenance where accurate temperature regulation matters. This part number 13908 is suited for drivers replacing a worn thermostat, addressing temperature control concerns, or restoring proper coolant flow behavior in an OE-style repair.
What It Is Used For
- Engine temperature running too cool or too warm
- Delayed coolant circulation after startup
- Cooling system service on an OE-style thermostat application
- Replacing a thermostat with incorrect opening temperature
- Restoring stable coolant flow in a Honda Civic or Toyota Corolla cooling system
Installation Notes and Tips
Verify the thermostat opening temperature, flange diameter, bypass plate diameter, and overall height against the removed part before installation. Clean the thermostat housing sealing surfaces thoroughly and inspect the housing, gasket surface, and coolant condition during service. Confirm the application by vehicle year, make, model, and engine configuration before ordering, since fitment depends on the exact cooling system specification.
Quality Assurance
Stant builds this OE Type Thermostat with an original equipment design approach and stainless steel assembly for consistent performance in cooling system service. Part number 13908 is manufactured to support reliable thermostat operation when the listed dimensions and 180 degree specification match the vehicle application.
Stant 13908 Engine Coolant Thermostat
Stant OE Type Thermostat 13908 Overview
Stant 13908 is an engine coolant thermostat built to OE-style dimensions and operating temperature for precise cooling system control. It opens at 180 degrees Fahrenheit and uses a stainless steel assembly for smooth operation in service.
For drivers searching for an OE replacement thermostat for Honda Civic or Toyota Corolla cooling system service, this Stant thermostat part number 13908 provides a direct-fit style solution where the application matches the listed specifications.
Key Features
- OE Type Thermostat design for factory-style cooling system performance
- 180 degrees Fahrenheit opening temperature
- Stainless steel assembly for consistent movement and corrosion resistance
- Durable construction for long service life
- Bypass plate diameter: 0.63 in
- Flange diameter without seal: 1.725 in
- Height from flange to bottom: 0.945 in
- Height from flange to top of bridge: 0.72 in
Detailed Description
Stant OE Type Thermostat 13908 is engineered as an original equipment design replacement for vehicles that require a 180 degree engine coolant thermostat with the listed flange and bypass dimensions. The stainless steel assembly supports smooth thermostat movement, while the durable material construction is intended to hold up to repeated heat cycles in everyday cooling system operation. If you are servicing a Honda Civic, Toyota Corolla, or another application that calls for this specification set, part number 13908 is built to match the required thermostat profile.
Stant’s OE Type Thermostat line focuses on factory-style fit and function, making it a practical choice for cooling system maintenance where accurate temperature regulation matters. This part number 13908 is suited for drivers replacing a worn thermostat, addressing temperature control concerns, or restoring proper coolant flow behavior in an OE-style repair.
What It Is Used For
- Engine temperature running too cool or too warm
- Delayed coolant circulation after startup
- Cooling system service on an OE-style thermostat application
- Replacing a thermostat with incorrect opening temperature
- Restoring stable coolant flow in a Honda Civic or Toyota Corolla cooling system
Installation Notes and Tips
Verify the thermostat opening temperature, flange diameter, bypass plate diameter, and overall height against the removed part before installation. Clean the thermostat housing sealing surfaces thoroughly and inspect the housing, gasket surface, and coolant condition during service. Confirm the application by vehicle year, make, model, and engine configuration before ordering, since fitment depends on the exact cooling system specification.
Quality Assurance
Stant builds this OE Type Thermostat with an original equipment design approach and stainless steel assembly for consistent performance in cooling system service. Part number 13908 is manufactured to support reliable thermostat operation when the listed dimensions and 180 degree specification match the vehicle application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Stant OE Type Thermostat 13908 Overview
Stant 13908 is an engine coolant thermostat built to OE-style dimensions and operating temperature for precise cooling system control. It opens at 180 degrees Fahrenheit and uses a stainless steel assembly for smooth operation in service.
For drivers searching for an OE replacement thermostat for Honda Civic or Toyota Corolla cooling system service, this Stant thermostat part number 13908 provides a direct-fit style solution where the application matches the listed specifications.
Key Features
- OE Type Thermostat design for factory-style cooling system performance
- 180 degrees Fahrenheit opening temperature
- Stainless steel assembly for consistent movement and corrosion resistance
- Durable construction for long service life
- Bypass plate diameter: 0.63 in
- Flange diameter without seal: 1.725 in
- Height from flange to bottom: 0.945 in
- Height from flange to top of bridge: 0.72 in
Detailed Description
Stant OE Type Thermostat 13908 is engineered as an original equipment design replacement for vehicles that require a 180 degree engine coolant thermostat with the listed flange and bypass dimensions. The stainless steel assembly supports smooth thermostat movement, while the durable material construction is intended to hold up to repeated heat cycles in everyday cooling system operation. If you are servicing a Honda Civic, Toyota Corolla, or another application that calls for this specification set, part number 13908 is built to match the required thermostat profile.
Stant’s OE Type Thermostat line focuses on factory-style fit and function, making it a practical choice for cooling system maintenance where accurate temperature regulation matters. This part number 13908 is suited for drivers replacing a worn thermostat, addressing temperature control concerns, or restoring proper coolant flow behavior in an OE-style repair.
What It Is Used For
- Engine temperature running too cool or too warm
- Delayed coolant circulation after startup
- Cooling system service on an OE-style thermostat application
- Replacing a thermostat with incorrect opening temperature
- Restoring stable coolant flow in a Honda Civic or Toyota Corolla cooling system
Installation Notes and Tips
Verify the thermostat opening temperature, flange diameter, bypass plate diameter, and overall height against the removed part before installation. Clean the thermostat housing sealing surfaces thoroughly and inspect the housing, gasket surface, and coolant condition during service. Confirm the application by vehicle year, make, model, and engine configuration before ordering, since fitment depends on the exact cooling system specification.
Quality Assurance
Stant builds this OE Type Thermostat with an original equipment design approach and stainless steel assembly for consistent performance in cooling system service. Part number 13908 is manufactured to support reliable thermostat operation when the listed dimensions and 180 degree specification match the vehicle application.
