Suspensia X15TE1046 Steering Tie Rod End - Front Left Outer
Front Left Outer Tie Rod End for Explorer
The Suspensia X15TE1046 is an outside steering tie rod end built for direct OE fit and OE-style appearance. It is compatible with 2020-2025 Ford Explorer, front left outer, and is engineered with forged steel construction, a steel stud, and a pre-greased design for service-ready installation.
Suspensia manufactures chassis components in a fully automated OE production facility in Turkiye, with quality systems certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018. The X15TE1046 is a practical replacement for worn steering linkage on Ford Explorer models that need precise front-end steering response.
Key Features
- Direct OE-fit steering tie rod end for the front left outer position
- Forged steel housing for strength and durability
- Steel ball joint stud with threaded stud type
- Pre-greased design for initial service readiness
- Rubber dust boot included to help protect the joint
- Locking nut included
- Outside tie rod design with female end 2 thread gender
- Non-greaseable construction
Detailed Description
This Suspensia steering tie rod end is built for 2020-2025 Ford Explorer front left outer applications and is intended to restore steering linkage integrity where the original part has loosened, worn, or developed play. The forged steel body, composite bearing material, and rubber boot support consistent steering feel while helping protect the joint from road contamination. Part number X15TE1046 is also a useful reference when sourcing the correct replacement for this Explorer steering position.
This part cross-references MOOG Chassis Products ES801597 for the same application.
What It Helps Fix
- Steering wheel looseness or excessive free play
- Clunking or knocking from the front steering linkage
- Uneven tire wear caused by worn tie rod components
- Imprecise steering response during lane changes or turns
- Front-end alignment issues related to worn outer tie rod hardware
Installation Notes and Tips
Install on the front left outer steering position only for the listed Ford Explorer applications. After replacement, a professional wheel alignment is required to set toe and verify steering geometry. Inspect the inner tie rod, adjusting sleeve, and related suspension components during service to confirm the rest of the steering system is in good condition. Part number X15TE1046 should be matched to the vehicle application before installation.
Quality Assurance
Suspensia chassis parts are produced to OE or better quality standards in an IATF 16949:2016-certified facility, with additional ISO certifications covering quality, environmental, occupational health and safety, and energy management. The brand’s OE-fit manufacturing approach supports consistent dimensional accuracy for Ford Explorer steering service.
Suspensia X15TE1046 Steering Tie Rod End - Front Left Outer
Front Left Outer Tie Rod End for Explorer
The Suspensia X15TE1046 is an outside steering tie rod end built for direct OE fit and OE-style appearance. It is compatible with 2020-2025 Ford Explorer, front left outer, and is engineered with forged steel construction, a steel stud, and a pre-greased design for service-ready installation.
Suspensia manufactures chassis components in a fully automated OE production facility in Turkiye, with quality systems certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018. The X15TE1046 is a practical replacement for worn steering linkage on Ford Explorer models that need precise front-end steering response.
Key Features
- Direct OE-fit steering tie rod end for the front left outer position
- Forged steel housing for strength and durability
- Steel ball joint stud with threaded stud type
- Pre-greased design for initial service readiness
- Rubber dust boot included to help protect the joint
- Locking nut included
- Outside tie rod design with female end 2 thread gender
- Non-greaseable construction
Detailed Description
This Suspensia steering tie rod end is built for 2020-2025 Ford Explorer front left outer applications and is intended to restore steering linkage integrity where the original part has loosened, worn, or developed play. The forged steel body, composite bearing material, and rubber boot support consistent steering feel while helping protect the joint from road contamination. Part number X15TE1046 is also a useful reference when sourcing the correct replacement for this Explorer steering position.
This part cross-references MOOG Chassis Products ES801597 for the same application.
What It Helps Fix
- Steering wheel looseness or excessive free play
- Clunking or knocking from the front steering linkage
- Uneven tire wear caused by worn tie rod components
- Imprecise steering response during lane changes or turns
- Front-end alignment issues related to worn outer tie rod hardware
Installation Notes and Tips
Install on the front left outer steering position only for the listed Ford Explorer applications. After replacement, a professional wheel alignment is required to set toe and verify steering geometry. Inspect the inner tie rod, adjusting sleeve, and related suspension components during service to confirm the rest of the steering system is in good condition. Part number X15TE1046 should be matched to the vehicle application before installation.
Quality Assurance
Suspensia chassis parts are produced to OE or better quality standards in an IATF 16949:2016-certified facility, with additional ISO certifications covering quality, environmental, occupational health and safety, and energy management. The brand’s OE-fit manufacturing approach supports consistent dimensional accuracy for Ford Explorer steering service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Left Outer Tie Rod End for Explorer
The Suspensia X15TE1046 is an outside steering tie rod end built for direct OE fit and OE-style appearance. It is compatible with 2020-2025 Ford Explorer, front left outer, and is engineered with forged steel construction, a steel stud, and a pre-greased design for service-ready installation.
Suspensia manufactures chassis components in a fully automated OE production facility in Turkiye, with quality systems certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018. The X15TE1046 is a practical replacement for worn steering linkage on Ford Explorer models that need precise front-end steering response.
Key Features
- Direct OE-fit steering tie rod end for the front left outer position
- Forged steel housing for strength and durability
- Steel ball joint stud with threaded stud type
- Pre-greased design for initial service readiness
- Rubber dust boot included to help protect the joint
- Locking nut included
- Outside tie rod design with female end 2 thread gender
- Non-greaseable construction
Detailed Description
This Suspensia steering tie rod end is built for 2020-2025 Ford Explorer front left outer applications and is intended to restore steering linkage integrity where the original part has loosened, worn, or developed play. The forged steel body, composite bearing material, and rubber boot support consistent steering feel while helping protect the joint from road contamination. Part number X15TE1046 is also a useful reference when sourcing the correct replacement for this Explorer steering position.
This part cross-references MOOG Chassis Products ES801597 for the same application.
What It Helps Fix
- Steering wheel looseness or excessive free play
- Clunking or knocking from the front steering linkage
- Uneven tire wear caused by worn tie rod components
- Imprecise steering response during lane changes or turns
- Front-end alignment issues related to worn outer tie rod hardware
Installation Notes and Tips
Install on the front left outer steering position only for the listed Ford Explorer applications. After replacement, a professional wheel alignment is required to set toe and verify steering geometry. Inspect the inner tie rod, adjusting sleeve, and related suspension components during service to confirm the rest of the steering system is in good condition. Part number X15TE1046 should be matched to the vehicle application before installation.
Quality Assurance
Suspensia chassis parts are produced to OE or better quality standards in an IATF 16949:2016-certified facility, with additional ISO certifications covering quality, environmental, occupational health and safety, and energy management. The brand’s OE-fit manufacturing approach supports consistent dimensional accuracy for Ford Explorer steering service.
