Suspensia X32LA0389 Suspension Control Arm - Rear Right Lower Rearward
Rear Right Lower Rearward Control Arm for Mazda MX-5 Miata
Restore rear suspension geometry with this Suspensia suspension control arm for the 2006-2015 Mazda MX-5 Miata. Part number X32LA0389 is built as a direct OE-fit replacement with steel construction and pre-greased rubber bushings for consistent rear suspension movement.
Designed for the rear right lower rearward position, this control arm supports precise alignment and stable handling on the Mazda MX-5 Miata. Suspensia manufactures OE-style chassis components in automated facilities certified to major quality, environmental, safety, and energy management standards.
Key Features
- Direct-fit suspension control arm for the rear right lower rearward position
- Steel arm construction for structural strength
- Pre-greased design for ready-to-install service
- Rubber bushings included with black bushing color
- Dust boot included with rubber boot material
- Lock nut included
- Stud thread size: M14 x 1.5
- Wrench size: 22 mm
Detailed Description
Suspensia X32LA0389 is a rear suspension control arm engineered for the 2006-2015 Mazda MX-5 Miata, rear right lower rearward position. It uses steel construction with rubber bushings and a rubber dust boot to support suspension articulation while helping maintain OE-style fit and appearance. The arm is pre-greased and includes a lock nut, while the ball joint, castle nut, grease fitting, cotter pin, and greaseable hardware are not included.
This part cross-references Monroe Shocks & Struts (e.g., NE5128500B, RK642624) for the same application. If you are replacing a worn rear suspension control arm on a Mazda MX-5 Miata, X32LA0389 provides a direct replacement path for the rear right lower rearward location.
Common Problems This Part Can Address
- Rear suspension looseness or clunking from worn arm bushings
- Uneven rear tire wear caused by suspension play
- Alignment instability in the rear suspension
- Excess movement at the rear right lower rearward control arm location
- Noise from deteriorated rubber bushings or dust boot wear
Installation Notes and Tips
Verify the rear right lower rearward position before installation on the Mazda MX-5 Miata. Inspect adjacent suspension hardware, alignment settings, and mounting points for wear or damage before final assembly. Because this control arm is pre-greased and not greaseable, service intervals are handled through replacement rather than routine fitting lubrication.
Quality Assurance
Suspensia states that its chassis parts are manufactured to OE or better quality standards in an automated OE manufacturing facility. The company’s production environment is certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018.
Suspensia X32LA0389 Suspension Control Arm - Rear Right Lower Rearward
Rear Right Lower Rearward Control Arm for Mazda MX-5 Miata
Restore rear suspension geometry with this Suspensia suspension control arm for the 2006-2015 Mazda MX-5 Miata. Part number X32LA0389 is built as a direct OE-fit replacement with steel construction and pre-greased rubber bushings for consistent rear suspension movement.
Designed for the rear right lower rearward position, this control arm supports precise alignment and stable handling on the Mazda MX-5 Miata. Suspensia manufactures OE-style chassis components in automated facilities certified to major quality, environmental, safety, and energy management standards.
Key Features
- Direct-fit suspension control arm for the rear right lower rearward position
- Steel arm construction for structural strength
- Pre-greased design for ready-to-install service
- Rubber bushings included with black bushing color
- Dust boot included with rubber boot material
- Lock nut included
- Stud thread size: M14 x 1.5
- Wrench size: 22 mm
Detailed Description
Suspensia X32LA0389 is a rear suspension control arm engineered for the 2006-2015 Mazda MX-5 Miata, rear right lower rearward position. It uses steel construction with rubber bushings and a rubber dust boot to support suspension articulation while helping maintain OE-style fit and appearance. The arm is pre-greased and includes a lock nut, while the ball joint, castle nut, grease fitting, cotter pin, and greaseable hardware are not included.
This part cross-references Monroe Shocks & Struts (e.g., NE5128500B, RK642624) for the same application. If you are replacing a worn rear suspension control arm on a Mazda MX-5 Miata, X32LA0389 provides a direct replacement path for the rear right lower rearward location.
Common Problems This Part Can Address
- Rear suspension looseness or clunking from worn arm bushings
- Uneven rear tire wear caused by suspension play
- Alignment instability in the rear suspension
- Excess movement at the rear right lower rearward control arm location
- Noise from deteriorated rubber bushings or dust boot wear
Installation Notes and Tips
Verify the rear right lower rearward position before installation on the Mazda MX-5 Miata. Inspect adjacent suspension hardware, alignment settings, and mounting points for wear or damage before final assembly. Because this control arm is pre-greased and not greaseable, service intervals are handled through replacement rather than routine fitting lubrication.
Quality Assurance
Suspensia states that its chassis parts are manufactured to OE or better quality standards in an automated OE manufacturing facility. The company’s production environment is certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Right Lower Rearward Control Arm for Mazda MX-5 Miata
Restore rear suspension geometry with this Suspensia suspension control arm for the 2006-2015 Mazda MX-5 Miata. Part number X32LA0389 is built as a direct OE-fit replacement with steel construction and pre-greased rubber bushings for consistent rear suspension movement.
Designed for the rear right lower rearward position, this control arm supports precise alignment and stable handling on the Mazda MX-5 Miata. Suspensia manufactures OE-style chassis components in automated facilities certified to major quality, environmental, safety, and energy management standards.
Key Features
- Direct-fit suspension control arm for the rear right lower rearward position
- Steel arm construction for structural strength
- Pre-greased design for ready-to-install service
- Rubber bushings included with black bushing color
- Dust boot included with rubber boot material
- Lock nut included
- Stud thread size: M14 x 1.5
- Wrench size: 22 mm
Detailed Description
Suspensia X32LA0389 is a rear suspension control arm engineered for the 2006-2015 Mazda MX-5 Miata, rear right lower rearward position. It uses steel construction with rubber bushings and a rubber dust boot to support suspension articulation while helping maintain OE-style fit and appearance. The arm is pre-greased and includes a lock nut, while the ball joint, castle nut, grease fitting, cotter pin, and greaseable hardware are not included.
This part cross-references Monroe Shocks & Struts (e.g., NE5128500B, RK642624) for the same application. If you are replacing a worn rear suspension control arm on a Mazda MX-5 Miata, X32LA0389 provides a direct replacement path for the rear right lower rearward location.
Common Problems This Part Can Address
- Rear suspension looseness or clunking from worn arm bushings
- Uneven rear tire wear caused by suspension play
- Alignment instability in the rear suspension
- Excess movement at the rear right lower rearward control arm location
- Noise from deteriorated rubber bushings or dust boot wear
Installation Notes and Tips
Verify the rear right lower rearward position before installation on the Mazda MX-5 Miata. Inspect adjacent suspension hardware, alignment settings, and mounting points for wear or damage before final assembly. Because this control arm is pre-greased and not greaseable, service intervals are handled through replacement rather than routine fitting lubrication.
Quality Assurance
Suspensia states that its chassis parts are manufactured to OE or better quality standards in an automated OE manufacturing facility. The company’s production environment is certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018.
