Vemo V20-72-0069 ABS Wheel Speed Sensor - Front Left or Front Right
ABS Wheel Speed Sensor for BMW Front Axle
The Vemo V20-72-0069 ABS wheel speed sensor is a Hall sensor built for vehicles with ABS and front axle fitment on select BMW 7 Series models. It uses a 12V, 2-pole design with a 710 mm cable length and OE-style dimensions for direct replacement service on the front right or front left position.
VEMO product line components are developed for precise electrical signal delivery and application-specific fitment. This ABS wheel speed sensor is listed for BMW 745i, 745Li, 750i, 750Li, 760i, and 760Li applications where the OE reference 34526752159 is specified.
- Part number: V20-72-0069
- Hall sensor design for ABS wheel speed monitoring
- 12V rated voltage with 2 electrical poles
- Cable length: 710 mm; overall length: 830 mm
- Front right and front left fitment on select BMW 7 Series models
- OE reference application for BMW 34526752159
Detailed Product Overview
Vemo V20-72-0069 is an ABS wheel speed sensor for BMW front axle applications that require accurate wheel speed input to the ABS system. The sensor measures 33 mm in height, 20 mm in width, and is specified for vehicles with ABS. Its Hall-effect sensing design supports consistent signal generation for braking and drive dynamics systems on the listed BMW 7 Series vehicles. If you are searching for a BMW 750i front wheel speed sensor, BMW 760Li ABS sensor, or a BMW 745Li front left ABS wheel speed sensor, this part number is a direct catalog match for the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Sensor Helps Address
- ABS warning light triggered by a faulty front wheel speed sensor
- Intermittent wheel speed signal loss at the front axle
- Brake system fault codes related to wheel speed input
- Erratic ABS operation caused by sensor signal degradation
- Drive dynamics issues tied to incorrect wheel speed data
Installation Notes and Fitment
Compatible With 2002-2008 BMW 745i, front right and front left; 2002-2008 BMW 745Li, front right and front left; 2003-2008 BMW 750i, front right and front left; 2003-2008 BMW 750Li, front right and front left; 2003-2008 BMW 760i, front right and front left; and 2003-2008 BMW 760Li, front right and front left, according to the listed OE application details. Confirm the OE number 34526752159, connector style, cable routing, and mounting points before installation. Inspect the harness path and sensor tip area for damage, corrosion, or debris that could affect signal quality.
Quality Assurance
Vemo brake and sensor components are cataloged to OE application data for accurate fitment selection. Verify the part number V20-72-0069 against the vehicle’s ABS system requirements and front axle position before ordering.
Vemo V20-72-0069 ABS Wheel Speed Sensor - Front Left or Front Right
ABS Wheel Speed Sensor for BMW Front Axle
The Vemo V20-72-0069 ABS wheel speed sensor is a Hall sensor built for vehicles with ABS and front axle fitment on select BMW 7 Series models. It uses a 12V, 2-pole design with a 710 mm cable length and OE-style dimensions for direct replacement service on the front right or front left position.
VEMO product line components are developed for precise electrical signal delivery and application-specific fitment. This ABS wheel speed sensor is listed for BMW 745i, 745Li, 750i, 750Li, 760i, and 760Li applications where the OE reference 34526752159 is specified.
- Part number: V20-72-0069
- Hall sensor design for ABS wheel speed monitoring
- 12V rated voltage with 2 electrical poles
- Cable length: 710 mm; overall length: 830 mm
- Front right and front left fitment on select BMW 7 Series models
- OE reference application for BMW 34526752159
Detailed Product Overview
Vemo V20-72-0069 is an ABS wheel speed sensor for BMW front axle applications that require accurate wheel speed input to the ABS system. The sensor measures 33 mm in height, 20 mm in width, and is specified for vehicles with ABS. Its Hall-effect sensing design supports consistent signal generation for braking and drive dynamics systems on the listed BMW 7 Series vehicles. If you are searching for a BMW 750i front wheel speed sensor, BMW 760Li ABS sensor, or a BMW 745Li front left ABS wheel speed sensor, this part number is a direct catalog match for the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Sensor Helps Address
- ABS warning light triggered by a faulty front wheel speed sensor
- Intermittent wheel speed signal loss at the front axle
- Brake system fault codes related to wheel speed input
- Erratic ABS operation caused by sensor signal degradation
- Drive dynamics issues tied to incorrect wheel speed data
Installation Notes and Fitment
Compatible With 2002-2008 BMW 745i, front right and front left; 2002-2008 BMW 745Li, front right and front left; 2003-2008 BMW 750i, front right and front left; 2003-2008 BMW 750Li, front right and front left; 2003-2008 BMW 760i, front right and front left; and 2003-2008 BMW 760Li, front right and front left, according to the listed OE application details. Confirm the OE number 34526752159, connector style, cable routing, and mounting points before installation. Inspect the harness path and sensor tip area for damage, corrosion, or debris that could affect signal quality.
Quality Assurance
Vemo brake and sensor components are cataloged to OE application data for accurate fitment selection. Verify the part number V20-72-0069 against the vehicle’s ABS system requirements and front axle position before ordering.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
ABS Wheel Speed Sensor for BMW Front Axle
The Vemo V20-72-0069 ABS wheel speed sensor is a Hall sensor built for vehicles with ABS and front axle fitment on select BMW 7 Series models. It uses a 12V, 2-pole design with a 710 mm cable length and OE-style dimensions for direct replacement service on the front right or front left position.
VEMO product line components are developed for precise electrical signal delivery and application-specific fitment. This ABS wheel speed sensor is listed for BMW 745i, 745Li, 750i, 750Li, 760i, and 760Li applications where the OE reference 34526752159 is specified.
- Part number: V20-72-0069
- Hall sensor design for ABS wheel speed monitoring
- 12V rated voltage with 2 electrical poles
- Cable length: 710 mm; overall length: 830 mm
- Front right and front left fitment on select BMW 7 Series models
- OE reference application for BMW 34526752159
Detailed Product Overview
Vemo V20-72-0069 is an ABS wheel speed sensor for BMW front axle applications that require accurate wheel speed input to the ABS system. The sensor measures 33 mm in height, 20 mm in width, and is specified for vehicles with ABS. Its Hall-effect sensing design supports consistent signal generation for braking and drive dynamics systems on the listed BMW 7 Series vehicles. If you are searching for a BMW 750i front wheel speed sensor, BMW 760Li ABS sensor, or a BMW 745Li front left ABS wheel speed sensor, this part number is a direct catalog match for the listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Sensor Helps Address
- ABS warning light triggered by a faulty front wheel speed sensor
- Intermittent wheel speed signal loss at the front axle
- Brake system fault codes related to wheel speed input
- Erratic ABS operation caused by sensor signal degradation
- Drive dynamics issues tied to incorrect wheel speed data
Installation Notes and Fitment
Compatible With 2002-2008 BMW 745i, front right and front left; 2002-2008 BMW 745Li, front right and front left; 2003-2008 BMW 750i, front right and front left; 2003-2008 BMW 750Li, front right and front left; 2003-2008 BMW 760i, front right and front left; and 2003-2008 BMW 760Li, front right and front left, according to the listed OE application details. Confirm the OE number 34526752159, connector style, cable routing, and mounting points before installation. Inspect the harness path and sensor tip area for damage, corrosion, or debris that could affect signal quality.
Quality Assurance
Vemo brake and sensor components are cataloged to OE application data for accurate fitment selection. Verify the part number V20-72-0069 against the vehicle’s ABS system requirements and front axle position before ordering.
