Vemo V30-76-0014 Oxygen Sensor
VEMO Oxygen Sensor for Mercedes-Benz Applications
The Vemo V30-76-0014 oxygen sensor is a 4-wire emission control sensor built for specific Mercedes-Benz front and rear positions. With a 300 mm cable, M18 x 1.5 thread, and round connector shape, it matches the physical requirements called out in the fitment data for select CL500, ML55 AMG, SL600, E320, E430, ML320, ML430, S430, S500, SLK230, and related models.
VEMO product line parts are built around OE-style replacement needs, with attention to connector layout, thread specification, and sensor lead length for direct application matching.
Key Features
- Part number: V30-76-0014
- Oxygen sensor for emission control systems
- 4-conductor / 4-circuit design
- 300 mm cable length for listed applications
- Round connector shape
- M18 x 1.5 thread size with pre-greased thread
- Fits front, rear, rear right, and front right positions depending on vehicle application
- Cross-reference example: Monroe Shocks & Struts 5682
Detailed Description
This Vemo oxygen sensor is specified for Mercedes-Benz vehicles that require a 4-wire lambda sensor with a 300 mm lead and M18 x 1.5 threaded mounting. The sensor dimensions, connector style, and circuit count are listed to support accurate replacement selection for emissions-related service. If you are sourcing a Mercedes-Benz CL500 rear oxygen sensor, a Mercedes-Benz SL600 front oxygen sensor, or a Mercedes-Benz ML55 AMG front sensor, the V30-76-0014 provides the fitment details needed to match the original application.
The part number V30-76-0014 also appears in interchange listings tied to several OE and aftermarket references, which helps when cross-checking an existing sensor number during diagnosis or replacement planning.
What It Helps Address
- Check engine light concerns related to oxygen sensor performance
- Incorrect air-fuel mixture readings from a worn sensor
- Emissions test failures caused by sensor degradation
- Slow or inaccurate exhaust oxygen feedback to the engine control system
- Replacement needs after sensor wiring, connector, or thread wear
Installation Notes and Tips
- Verify the required position before ordering: front, rear, rear right, or front right.
- Confirm the connector shape, 4-circuit layout, and 300 mm lead length against the removed sensor.
- Check thread size and mounting depth before installation; this sensor uses M18 x 1.5 threads.
- Use the vehicle’s exact year, model, and position from the fitment list to confirm application match.
- For Mercedes-Benz E320 and E430 rear applications, compare the original sensor routing and connector location before replacement.
Quality Assurance
VEMO part V30-76-0014 is cataloged with detailed dimensional and electrical specifications to support application-specific replacement on listed Mercedes-Benz vehicles. The sensor is identified as a 4-wire aftermarket replacement with pre-greased threads for the specified applications.
- Fits 2004 Mercedes-Benz CL500, rear
- Fits 2000 Mercedes-Benz CL500, rear
- Fits 2000-2003 Mercedes-Benz ML55 AMG, front
- Fits 1996-2002 Mercedes-Benz SL600, rear
- Fits 1996-2002 Mercedes-Benz SL600, front
- Fits 1998-2000 Mercedes-Benz E320, rear
- Fits 1998-2000 Mercedes-Benz E430, rear
- Fits 1998-2000 Mercedes-Benz ML320, front
- Fits 1999-2000 Mercedes-Benz ML430, front
- Fits 2000 Mercedes-Benz S430, rear
- Fits 2000 Mercedes-Benz S500, rear
- Fits 1998-2000 Mercedes-Benz SLK230, rear
- Fits 1998-1999 Mercedes-Benz CL500, rear right
- Fits 1998-1999 Mercedes-Benz CL600, front
- Fits 1996-1999 Mercedes-Benz S420, rear right
- Fits 1996-1999 Mercedes-Benz S500, rear right
- Fits 1996-1999 Mercedes-Benz S600, front
- Fits 1998 Mercedes-Benz ML320, rear
- Fits 1996-1998 Mercedes-Benz SL500, rear
- Fits 1996-1998 Mercedes-Benz SL500, front right
- Fits 1997 Mercedes-Benz C280, front
- Fits 1997 Mercedes-Benz C36 AMG, front
- Fits 1997 Mercedes-Benz E420, rear
- Fits 1997 Mercedes-Benz SL320, rear
- Fits 1996 Mercedes-Benz C280, front
- Fits 1996 Mercedes-Benz C36 AMG, front
- Fits 1995 Mercedes-Benz C36 AMG, front
- Fits 1995 Mercedes-Benz SL600, N/A
Original: $80.66
-65%$80.66
$28.23Vemo V30-76-0014 Oxygen Sensor
VEMO Oxygen Sensor for Mercedes-Benz Applications
The Vemo V30-76-0014 oxygen sensor is a 4-wire emission control sensor built for specific Mercedes-Benz front and rear positions. With a 300 mm cable, M18 x 1.5 thread, and round connector shape, it matches the physical requirements called out in the fitment data for select CL500, ML55 AMG, SL600, E320, E430, ML320, ML430, S430, S500, SLK230, and related models.
VEMO product line parts are built around OE-style replacement needs, with attention to connector layout, thread specification, and sensor lead length for direct application matching.
Key Features
- Part number: V30-76-0014
- Oxygen sensor for emission control systems
- 4-conductor / 4-circuit design
- 300 mm cable length for listed applications
- Round connector shape
- M18 x 1.5 thread size with pre-greased thread
- Fits front, rear, rear right, and front right positions depending on vehicle application
- Cross-reference example: Monroe Shocks & Struts 5682
Detailed Description
This Vemo oxygen sensor is specified for Mercedes-Benz vehicles that require a 4-wire lambda sensor with a 300 mm lead and M18 x 1.5 threaded mounting. The sensor dimensions, connector style, and circuit count are listed to support accurate replacement selection for emissions-related service. If you are sourcing a Mercedes-Benz CL500 rear oxygen sensor, a Mercedes-Benz SL600 front oxygen sensor, or a Mercedes-Benz ML55 AMG front sensor, the V30-76-0014 provides the fitment details needed to match the original application.
The part number V30-76-0014 also appears in interchange listings tied to several OE and aftermarket references, which helps when cross-checking an existing sensor number during diagnosis or replacement planning.
What It Helps Address
- Check engine light concerns related to oxygen sensor performance
- Incorrect air-fuel mixture readings from a worn sensor
- Emissions test failures caused by sensor degradation
- Slow or inaccurate exhaust oxygen feedback to the engine control system
- Replacement needs after sensor wiring, connector, or thread wear
Installation Notes and Tips
- Verify the required position before ordering: front, rear, rear right, or front right.
- Confirm the connector shape, 4-circuit layout, and 300 mm lead length against the removed sensor.
- Check thread size and mounting depth before installation; this sensor uses M18 x 1.5 threads.
- Use the vehicle’s exact year, model, and position from the fitment list to confirm application match.
- For Mercedes-Benz E320 and E430 rear applications, compare the original sensor routing and connector location before replacement.
Quality Assurance
VEMO part V30-76-0014 is cataloged with detailed dimensional and electrical specifications to support application-specific replacement on listed Mercedes-Benz vehicles. The sensor is identified as a 4-wire aftermarket replacement with pre-greased threads for the specified applications.
- Fits 2004 Mercedes-Benz CL500, rear
- Fits 2000 Mercedes-Benz CL500, rear
- Fits 2000-2003 Mercedes-Benz ML55 AMG, front
- Fits 1996-2002 Mercedes-Benz SL600, rear
- Fits 1996-2002 Mercedes-Benz SL600, front
- Fits 1998-2000 Mercedes-Benz E320, rear
- Fits 1998-2000 Mercedes-Benz E430, rear
- Fits 1998-2000 Mercedes-Benz ML320, front
- Fits 1999-2000 Mercedes-Benz ML430, front
- Fits 2000 Mercedes-Benz S430, rear
- Fits 2000 Mercedes-Benz S500, rear
- Fits 1998-2000 Mercedes-Benz SLK230, rear
- Fits 1998-1999 Mercedes-Benz CL500, rear right
- Fits 1998-1999 Mercedes-Benz CL600, front
- Fits 1996-1999 Mercedes-Benz S420, rear right
- Fits 1996-1999 Mercedes-Benz S500, rear right
- Fits 1996-1999 Mercedes-Benz S600, front
- Fits 1998 Mercedes-Benz ML320, rear
- Fits 1996-1998 Mercedes-Benz SL500, rear
- Fits 1996-1998 Mercedes-Benz SL500, front right
- Fits 1997 Mercedes-Benz C280, front
- Fits 1997 Mercedes-Benz C36 AMG, front
- Fits 1997 Mercedes-Benz E420, rear
- Fits 1997 Mercedes-Benz SL320, rear
- Fits 1996 Mercedes-Benz C280, front
- Fits 1996 Mercedes-Benz C36 AMG, front
- Fits 1995 Mercedes-Benz C36 AMG, front
- Fits 1995 Mercedes-Benz SL600, N/A
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VEMO Oxygen Sensor for Mercedes-Benz Applications
The Vemo V30-76-0014 oxygen sensor is a 4-wire emission control sensor built for specific Mercedes-Benz front and rear positions. With a 300 mm cable, M18 x 1.5 thread, and round connector shape, it matches the physical requirements called out in the fitment data for select CL500, ML55 AMG, SL600, E320, E430, ML320, ML430, S430, S500, SLK230, and related models.
VEMO product line parts are built around OE-style replacement needs, with attention to connector layout, thread specification, and sensor lead length for direct application matching.
Key Features
- Part number: V30-76-0014
- Oxygen sensor for emission control systems
- 4-conductor / 4-circuit design
- 300 mm cable length for listed applications
- Round connector shape
- M18 x 1.5 thread size with pre-greased thread
- Fits front, rear, rear right, and front right positions depending on vehicle application
- Cross-reference example: Monroe Shocks & Struts 5682
Detailed Description
This Vemo oxygen sensor is specified for Mercedes-Benz vehicles that require a 4-wire lambda sensor with a 300 mm lead and M18 x 1.5 threaded mounting. The sensor dimensions, connector style, and circuit count are listed to support accurate replacement selection for emissions-related service. If you are sourcing a Mercedes-Benz CL500 rear oxygen sensor, a Mercedes-Benz SL600 front oxygen sensor, or a Mercedes-Benz ML55 AMG front sensor, the V30-76-0014 provides the fitment details needed to match the original application.
The part number V30-76-0014 also appears in interchange listings tied to several OE and aftermarket references, which helps when cross-checking an existing sensor number during diagnosis or replacement planning.
What It Helps Address
- Check engine light concerns related to oxygen sensor performance
- Incorrect air-fuel mixture readings from a worn sensor
- Emissions test failures caused by sensor degradation
- Slow or inaccurate exhaust oxygen feedback to the engine control system
- Replacement needs after sensor wiring, connector, or thread wear
Installation Notes and Tips
- Verify the required position before ordering: front, rear, rear right, or front right.
- Confirm the connector shape, 4-circuit layout, and 300 mm lead length against the removed sensor.
- Check thread size and mounting depth before installation; this sensor uses M18 x 1.5 threads.
- Use the vehicle’s exact year, model, and position from the fitment list to confirm application match.
- For Mercedes-Benz E320 and E430 rear applications, compare the original sensor routing and connector location before replacement.
Quality Assurance
VEMO part V30-76-0014 is cataloged with detailed dimensional and electrical specifications to support application-specific replacement on listed Mercedes-Benz vehicles. The sensor is identified as a 4-wire aftermarket replacement with pre-greased threads for the specified applications.
- Fits 2004 Mercedes-Benz CL500, rear
- Fits 2000 Mercedes-Benz CL500, rear
- Fits 2000-2003 Mercedes-Benz ML55 AMG, front
- Fits 1996-2002 Mercedes-Benz SL600, rear
- Fits 1996-2002 Mercedes-Benz SL600, front
- Fits 1998-2000 Mercedes-Benz E320, rear
- Fits 1998-2000 Mercedes-Benz E430, rear
- Fits 1998-2000 Mercedes-Benz ML320, front
- Fits 1999-2000 Mercedes-Benz ML430, front
- Fits 2000 Mercedes-Benz S430, rear
- Fits 2000 Mercedes-Benz S500, rear
- Fits 1998-2000 Mercedes-Benz SLK230, rear
- Fits 1998-1999 Mercedes-Benz CL500, rear right
- Fits 1998-1999 Mercedes-Benz CL600, front
- Fits 1996-1999 Mercedes-Benz S420, rear right
- Fits 1996-1999 Mercedes-Benz S500, rear right
- Fits 1996-1999 Mercedes-Benz S600, front
- Fits 1998 Mercedes-Benz ML320, rear
- Fits 1996-1998 Mercedes-Benz SL500, rear
- Fits 1996-1998 Mercedes-Benz SL500, front right
- Fits 1997 Mercedes-Benz C280, front
- Fits 1997 Mercedes-Benz C36 AMG, front
- Fits 1997 Mercedes-Benz E420, rear
- Fits 1997 Mercedes-Benz SL320, rear
- Fits 1996 Mercedes-Benz C280, front
- Fits 1996 Mercedes-Benz C36 AMG, front
- Fits 1995 Mercedes-Benz C36 AMG, front
- Fits 1995 Mercedes-Benz SL600, N/A
