Victor Reinz 11-10810-01 Engine Intake Manifold Gasket Set
Victor Reinz Intake Manifold Gasket Set
Victor Reinz 11-10810-01 is an engine intake manifold gasket set built for sealing the intake system where fuel, air, coolant, and oil are exposed to demanding operating conditions. It is a direct-fit sealing solution for select Toyota and Lexus applications, including the Toyota Highlander, Camry, Sienna, Solara, and Lexus RX330, ES330, and RX400h.
Built with molded rubber and metal construction, this intake manifold gasket set is designed to maintain a reliable seal across upper and lower manifold interfaces. The multi-piece configuration supports the sealing requirements of the intake system on the listed vehicles.
Key Features
- Victor Reinz part number 11-10810-01
- Engine intake manifold gasket set for intake sealing service
- Molded rubber and metal material construction
- Multi-piece configuration for manifold sealing applications
- Manifold gasket bolt hole quantity: 7
- Compatible with select Toyota Highlander, Camry, Sienna, and Solara models
- Compatible with select Lexus ES330, RX330, and RX400h models
Detailed Description
Victor Reinz engineers intake manifold sealing components using a broad range of gasket materials and constructions to match the needs of specific engines. Part number 11-10810-01 is designed for applications where the intake manifold must seal air, coolant, fuel, and oil passages under heat and vibration. This makes it a practical choice for Toyota Highlander intake manifold gasket replacement, Toyota Camry intake manifold gasket service, and Lexus RX330 intake manifold gasket repair on the listed model years.
This part cross-references MAHLE MS19565 for the same application. It also cross-references MS18322 and MS927661 for the same application.
What It Helps Address
- Intake manifold vacuum leaks
- Coolant seepage at the manifold sealing surface
- Air leaks that can affect idle quality
- Oil contamination around intake sealing areas
- Loss of sealing integrity after manifold service
Installation Notes and Tips
- Verify engine and vehicle fitment before installation using the exact year and model listing.
- Inspect the intake manifold and cylinder head sealing surfaces for residue, warpage, or damage before assembly.
- Clean all mating surfaces thoroughly so the molded rubber and metal seals can seat properly.
- Follow the vehicle service manual for torque sequence and tightening specifications.
- Replace any worn or damaged related seals during intake manifold service as required by the application.
Quality Assurance
Victor Reinz is known for gasket and sealing system coverage across import, domestic, heavy cast iron, and lightweight aluminum engine designs. Part number 11-10810-01 is engineered for the sealing demands of the listed Toyota and Lexus applications, with material selection matched to the engine’s operating environment.
Compatible With 2004-2010 Toyota Highlander, 2006-2008 Lexus RX400h, 2004-2008 Toyota Solara, 2004-2006 Lexus ES330, 2004-2006 Lexus RX330, 2004-2006 Toyota Camry, and 2004-2006 Toyota Sienna.
Original: $119.49
-65%$119.49
$41.82Victor Reinz 11-10810-01 Engine Intake Manifold Gasket Set
Victor Reinz Intake Manifold Gasket Set
Victor Reinz 11-10810-01 is an engine intake manifold gasket set built for sealing the intake system where fuel, air, coolant, and oil are exposed to demanding operating conditions. It is a direct-fit sealing solution for select Toyota and Lexus applications, including the Toyota Highlander, Camry, Sienna, Solara, and Lexus RX330, ES330, and RX400h.
Built with molded rubber and metal construction, this intake manifold gasket set is designed to maintain a reliable seal across upper and lower manifold interfaces. The multi-piece configuration supports the sealing requirements of the intake system on the listed vehicles.
Key Features
- Victor Reinz part number 11-10810-01
- Engine intake manifold gasket set for intake sealing service
- Molded rubber and metal material construction
- Multi-piece configuration for manifold sealing applications
- Manifold gasket bolt hole quantity: 7
- Compatible with select Toyota Highlander, Camry, Sienna, and Solara models
- Compatible with select Lexus ES330, RX330, and RX400h models
Detailed Description
Victor Reinz engineers intake manifold sealing components using a broad range of gasket materials and constructions to match the needs of specific engines. Part number 11-10810-01 is designed for applications where the intake manifold must seal air, coolant, fuel, and oil passages under heat and vibration. This makes it a practical choice for Toyota Highlander intake manifold gasket replacement, Toyota Camry intake manifold gasket service, and Lexus RX330 intake manifold gasket repair on the listed model years.
This part cross-references MAHLE MS19565 for the same application. It also cross-references MS18322 and MS927661 for the same application.
What It Helps Address
- Intake manifold vacuum leaks
- Coolant seepage at the manifold sealing surface
- Air leaks that can affect idle quality
- Oil contamination around intake sealing areas
- Loss of sealing integrity after manifold service
Installation Notes and Tips
- Verify engine and vehicle fitment before installation using the exact year and model listing.
- Inspect the intake manifold and cylinder head sealing surfaces for residue, warpage, or damage before assembly.
- Clean all mating surfaces thoroughly so the molded rubber and metal seals can seat properly.
- Follow the vehicle service manual for torque sequence and tightening specifications.
- Replace any worn or damaged related seals during intake manifold service as required by the application.
Quality Assurance
Victor Reinz is known for gasket and sealing system coverage across import, domestic, heavy cast iron, and lightweight aluminum engine designs. Part number 11-10810-01 is engineered for the sealing demands of the listed Toyota and Lexus applications, with material selection matched to the engine’s operating environment.
Compatible With 2004-2010 Toyota Highlander, 2006-2008 Lexus RX400h, 2004-2008 Toyota Solara, 2004-2006 Lexus ES330, 2004-2006 Lexus RX330, 2004-2006 Toyota Camry, and 2004-2006 Toyota Sienna.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Victor Reinz Intake Manifold Gasket Set
Victor Reinz 11-10810-01 is an engine intake manifold gasket set built for sealing the intake system where fuel, air, coolant, and oil are exposed to demanding operating conditions. It is a direct-fit sealing solution for select Toyota and Lexus applications, including the Toyota Highlander, Camry, Sienna, Solara, and Lexus RX330, ES330, and RX400h.
Built with molded rubber and metal construction, this intake manifold gasket set is designed to maintain a reliable seal across upper and lower manifold interfaces. The multi-piece configuration supports the sealing requirements of the intake system on the listed vehicles.
Key Features
- Victor Reinz part number 11-10810-01
- Engine intake manifold gasket set for intake sealing service
- Molded rubber and metal material construction
- Multi-piece configuration for manifold sealing applications
- Manifold gasket bolt hole quantity: 7
- Compatible with select Toyota Highlander, Camry, Sienna, and Solara models
- Compatible with select Lexus ES330, RX330, and RX400h models
Detailed Description
Victor Reinz engineers intake manifold sealing components using a broad range of gasket materials and constructions to match the needs of specific engines. Part number 11-10810-01 is designed for applications where the intake manifold must seal air, coolant, fuel, and oil passages under heat and vibration. This makes it a practical choice for Toyota Highlander intake manifold gasket replacement, Toyota Camry intake manifold gasket service, and Lexus RX330 intake manifold gasket repair on the listed model years.
This part cross-references MAHLE MS19565 for the same application. It also cross-references MS18322 and MS927661 for the same application.
What It Helps Address
- Intake manifold vacuum leaks
- Coolant seepage at the manifold sealing surface
- Air leaks that can affect idle quality
- Oil contamination around intake sealing areas
- Loss of sealing integrity after manifold service
Installation Notes and Tips
- Verify engine and vehicle fitment before installation using the exact year and model listing.
- Inspect the intake manifold and cylinder head sealing surfaces for residue, warpage, or damage before assembly.
- Clean all mating surfaces thoroughly so the molded rubber and metal seals can seat properly.
- Follow the vehicle service manual for torque sequence and tightening specifications.
- Replace any worn or damaged related seals during intake manifold service as required by the application.
Quality Assurance
Victor Reinz is known for gasket and sealing system coverage across import, domestic, heavy cast iron, and lightweight aluminum engine designs. Part number 11-10810-01 is engineered for the sealing demands of the listed Toyota and Lexus applications, with material selection matched to the engine’s operating environment.
Compatible With 2004-2010 Toyota Highlander, 2006-2008 Lexus RX400h, 2004-2008 Toyota Solara, 2004-2006 Lexus ES330, 2004-2006 Lexus RX330, 2004-2006 Toyota Camry, and 2004-2006 Toyota Sienna.
