Walker 211-1130 Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor for Chrysler, Dodge, Jeep, Ram
Walker Products 211-1130 is an engine coolant temperature sensor built for a wide range of Chrysler, Dodge, Jeep, Ram, and select Volkswagen applications. It is a direct-fit sensor-only replacement for vehicles that rely on accurate coolant temperature input for engine management and gauge operation.
Walker Products has supplied fuel system and engine sensor components since 1946 and manufactures to meet or exceed OEM standards and specifications. The Walker Products line is backed by in-house manufacturing, engineering, product management, and technical support, with ISO 9001/IATF16949 certification supporting consistent production control.
Key Features
- Engine coolant temperature sensor for OE-style replacement
- Walker Products part number 211-1130
- Sensor-only design for service replacement
- Built for accurate coolant temperature signal delivery
- Cross-references Gates 12334 and Standard Ignition TX195 for the same application
- Fits many 2008-2024 Chrysler, Dodge, Jeep, Ram, and Volkswagen Routan applications
Detailed Description
This coolant temperature sensor is used to report engine coolant temperature to the vehicle control system, helping the PCM manage fuel delivery, idle strategy, and temperature-related engine functions. It is a practical replacement for vehicles such as the Dodge Durango, Jeep Grand Cherokee, Ram 1500, and Chrysler 300, including applications where the sensor is located on the water pump, oil filter housing, thermostat housing, intake manifold, or engine.
Walker Products 211-1130 is listed across a broad range of fitments from 2008 through 2024, including long-tail search applications such as Fits 2021-2024 Ram 1500, sensor only; Fits 2021-2024 Jeep Wrangler, sensor only; and Fits 2014-2020 Jeep Grand Cherokee, located on water pump. It also covers Fits 2014-2018 Chrysler 300, at oil filter; Fits 2014-2017 Dodge Challenger, at oil filter; and Fits 2009-2014 Volkswagen Routan, sensor only.
Common Issues This Sensor Can Address
- Incorrect coolant temperature readings on the dash or scan tool
- Hard starting or rough cold operation caused by inaccurate temperature input
- Cooling fan behavior affected by faulty temperature signal
- Check engine light concerns tied to coolant temperature sensor faults
- Driveability problems related to engine management temperature data
Installation Notes and Tips
Verify the sensor location before ordering, since fitment notes vary by vehicle and engine layout. Confirm connector style and mounting location against the existing part, especially on applications noted as at oil filter, on thermostat housing, on water pump, or with gray connector. Use the vehicle year, make, model, and engine configuration to match the correct application before installation.
Quality Assurance
Walker Products manufactures engine sensors to meet or exceed OEM standards and specifications, with production supported by engineering and technical staff. The brand’s ISO 9001/IATF16949 certification reflects controlled manufacturing processes for consistent part quality and application accuracy.
Original: $31.46
-65%$31.46
$11.01Walker 211-1130 Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor for Chrysler, Dodge, Jeep, Ram
Walker Products 211-1130 is an engine coolant temperature sensor built for a wide range of Chrysler, Dodge, Jeep, Ram, and select Volkswagen applications. It is a direct-fit sensor-only replacement for vehicles that rely on accurate coolant temperature input for engine management and gauge operation.
Walker Products has supplied fuel system and engine sensor components since 1946 and manufactures to meet or exceed OEM standards and specifications. The Walker Products line is backed by in-house manufacturing, engineering, product management, and technical support, with ISO 9001/IATF16949 certification supporting consistent production control.
Key Features
- Engine coolant temperature sensor for OE-style replacement
- Walker Products part number 211-1130
- Sensor-only design for service replacement
- Built for accurate coolant temperature signal delivery
- Cross-references Gates 12334 and Standard Ignition TX195 for the same application
- Fits many 2008-2024 Chrysler, Dodge, Jeep, Ram, and Volkswagen Routan applications
Detailed Description
This coolant temperature sensor is used to report engine coolant temperature to the vehicle control system, helping the PCM manage fuel delivery, idle strategy, and temperature-related engine functions. It is a practical replacement for vehicles such as the Dodge Durango, Jeep Grand Cherokee, Ram 1500, and Chrysler 300, including applications where the sensor is located on the water pump, oil filter housing, thermostat housing, intake manifold, or engine.
Walker Products 211-1130 is listed across a broad range of fitments from 2008 through 2024, including long-tail search applications such as Fits 2021-2024 Ram 1500, sensor only; Fits 2021-2024 Jeep Wrangler, sensor only; and Fits 2014-2020 Jeep Grand Cherokee, located on water pump. It also covers Fits 2014-2018 Chrysler 300, at oil filter; Fits 2014-2017 Dodge Challenger, at oil filter; and Fits 2009-2014 Volkswagen Routan, sensor only.
Common Issues This Sensor Can Address
- Incorrect coolant temperature readings on the dash or scan tool
- Hard starting or rough cold operation caused by inaccurate temperature input
- Cooling fan behavior affected by faulty temperature signal
- Check engine light concerns tied to coolant temperature sensor faults
- Driveability problems related to engine management temperature data
Installation Notes and Tips
Verify the sensor location before ordering, since fitment notes vary by vehicle and engine layout. Confirm connector style and mounting location against the existing part, especially on applications noted as at oil filter, on thermostat housing, on water pump, or with gray connector. Use the vehicle year, make, model, and engine configuration to match the correct application before installation.
Quality Assurance
Walker Products manufactures engine sensors to meet or exceed OEM standards and specifications, with production supported by engineering and technical staff. The brand’s ISO 9001/IATF16949 certification reflects controlled manufacturing processes for consistent part quality and application accuracy.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Coolant Temperature Sensor for Chrysler, Dodge, Jeep, Ram
Walker Products 211-1130 is an engine coolant temperature sensor built for a wide range of Chrysler, Dodge, Jeep, Ram, and select Volkswagen applications. It is a direct-fit sensor-only replacement for vehicles that rely on accurate coolant temperature input for engine management and gauge operation.
Walker Products has supplied fuel system and engine sensor components since 1946 and manufactures to meet or exceed OEM standards and specifications. The Walker Products line is backed by in-house manufacturing, engineering, product management, and technical support, with ISO 9001/IATF16949 certification supporting consistent production control.
Key Features
- Engine coolant temperature sensor for OE-style replacement
- Walker Products part number 211-1130
- Sensor-only design for service replacement
- Built for accurate coolant temperature signal delivery
- Cross-references Gates 12334 and Standard Ignition TX195 for the same application
- Fits many 2008-2024 Chrysler, Dodge, Jeep, Ram, and Volkswagen Routan applications
Detailed Description
This coolant temperature sensor is used to report engine coolant temperature to the vehicle control system, helping the PCM manage fuel delivery, idle strategy, and temperature-related engine functions. It is a practical replacement for vehicles such as the Dodge Durango, Jeep Grand Cherokee, Ram 1500, and Chrysler 300, including applications where the sensor is located on the water pump, oil filter housing, thermostat housing, intake manifold, or engine.
Walker Products 211-1130 is listed across a broad range of fitments from 2008 through 2024, including long-tail search applications such as Fits 2021-2024 Ram 1500, sensor only; Fits 2021-2024 Jeep Wrangler, sensor only; and Fits 2014-2020 Jeep Grand Cherokee, located on water pump. It also covers Fits 2014-2018 Chrysler 300, at oil filter; Fits 2014-2017 Dodge Challenger, at oil filter; and Fits 2009-2014 Volkswagen Routan, sensor only.
Common Issues This Sensor Can Address
- Incorrect coolant temperature readings on the dash or scan tool
- Hard starting or rough cold operation caused by inaccurate temperature input
- Cooling fan behavior affected by faulty temperature signal
- Check engine light concerns tied to coolant temperature sensor faults
- Driveability problems related to engine management temperature data
Installation Notes and Tips
Verify the sensor location before ordering, since fitment notes vary by vehicle and engine layout. Confirm connector style and mounting location against the existing part, especially on applications noted as at oil filter, on thermostat housing, on water pump, or with gray connector. Use the vehicle year, make, model, and engine configuration to match the correct application before installation.
Quality Assurance
Walker Products manufactures engine sensors to meet or exceed OEM standards and specifications, with production supported by engineering and technical staff. The brand’s ISO 9001/IATF16949 certification reflects controlled manufacturing processes for consistent part quality and application accuracy.
