Walker 225-1378 Manifold Absolute Pressure Sensor
Walker Sensor Only MAP Sensor for Volvo
Walker Products Part Number 225-1378 is a Manifold Absolute Pressure (MAP) sensor built as an OE replacement for Volvo applications. It measures intake manifold pressure and sends that signal to the ECM so the engine can calculate load, fuel delivery, and ignition timing with the correct input.
The Sensor Only line from Walker focuses on direct-fit replacement sensors engineered for electrical output, pressure range, and connector fit. For Volvo S60, S90, V60, XC60, and XC90 applications, this MAP sensor supports accurate engine management and consistent drivability.
Key Features
- OE replacement Manifold Absolute Pressure Sensor
- Part Number: 225-1378
- Black connector with rectangular shape
- 1 female connector, 3 male terminals
- Plug-in fitting type for direct connection
- Plastic body construction
- 1 port design
- Built for high engine bay temperatures, vibration, and intake air contaminants
- Cross-references Standard Ignition AS529
Detailed Description
Walker 225-1378 is designed for vehicles that rely on precise manifold pressure data to manage fuel injection and ignition timing. It is engineered to meet OE specifications for signal output, pressure range, and connector fit, helping restore proper ECM input on Volvo turbocharged and non-turbo engine management systems. This part cross-references Standard Ignition AS529 for the same application.
Vehicle Fitment
- Fits 2017-2025 Volvo S90, N/A
- Fits 2015-2025 Volvo V60, N/A
- Fits 2015-2025 Volvo XC60, N/A
- Fits 2016-2025 Volvo XC90, N/A
- Fits 2015-2024 Volvo S60, N/A
- Fits 2019-2022 Volvo XC40, N/A
- Fits 2020-2021 Volvo V60 Cross Country, N/A
- Fits 2017-2018 Volvo V60 Cross Country, N/A
- Fits 2018-2021 Volvo V90, N/A
- Fits 2017-2021 Volvo V90 Cross Country, N/A
- Fits 2017-2018 Volvo S60 Cross Country, N/A
- Fits 2015-2016 Volvo S80, N/A
- Fits 2015-2016 Volvo XC70, N/A
Common Issues This Sensor Can Address
- Check engine light related to manifold pressure signal faults
- Rough idle or inconsistent throttle response
- Incorrect fuel delivery caused by inaccurate load readings
- Poor acceleration or reduced engine performance
- Emissions-related drivability concerns
Installation Notes and Tips
Verify connector shape, terminal count, and port configuration before installation. This sensor uses a plug-in, 1-connector design with a rectangular female connector and 3 male terminals, so matching the original electrical interface is important for proper operation. Confirm the vehicle application by year and model before replacement.
Quality Assurance
Walker Products engineers this MAP sensor to OE-level specifications and tests it for accuracy, responsiveness, and long-term reliability. The design is built to handle engine bay heat, vibration, and intake contamination while maintaining stable ECM communication.
Original: $122.02
-65%$122.02
$42.71Walker 225-1378 Manifold Absolute Pressure Sensor
Walker Sensor Only MAP Sensor for Volvo
Walker Products Part Number 225-1378 is a Manifold Absolute Pressure (MAP) sensor built as an OE replacement for Volvo applications. It measures intake manifold pressure and sends that signal to the ECM so the engine can calculate load, fuel delivery, and ignition timing with the correct input.
The Sensor Only line from Walker focuses on direct-fit replacement sensors engineered for electrical output, pressure range, and connector fit. For Volvo S60, S90, V60, XC60, and XC90 applications, this MAP sensor supports accurate engine management and consistent drivability.
Key Features
- OE replacement Manifold Absolute Pressure Sensor
- Part Number: 225-1378
- Black connector with rectangular shape
- 1 female connector, 3 male terminals
- Plug-in fitting type for direct connection
- Plastic body construction
- 1 port design
- Built for high engine bay temperatures, vibration, and intake air contaminants
- Cross-references Standard Ignition AS529
Detailed Description
Walker 225-1378 is designed for vehicles that rely on precise manifold pressure data to manage fuel injection and ignition timing. It is engineered to meet OE specifications for signal output, pressure range, and connector fit, helping restore proper ECM input on Volvo turbocharged and non-turbo engine management systems. This part cross-references Standard Ignition AS529 for the same application.
Vehicle Fitment
- Fits 2017-2025 Volvo S90, N/A
- Fits 2015-2025 Volvo V60, N/A
- Fits 2015-2025 Volvo XC60, N/A
- Fits 2016-2025 Volvo XC90, N/A
- Fits 2015-2024 Volvo S60, N/A
- Fits 2019-2022 Volvo XC40, N/A
- Fits 2020-2021 Volvo V60 Cross Country, N/A
- Fits 2017-2018 Volvo V60 Cross Country, N/A
- Fits 2018-2021 Volvo V90, N/A
- Fits 2017-2021 Volvo V90 Cross Country, N/A
- Fits 2017-2018 Volvo S60 Cross Country, N/A
- Fits 2015-2016 Volvo S80, N/A
- Fits 2015-2016 Volvo XC70, N/A
Common Issues This Sensor Can Address
- Check engine light related to manifold pressure signal faults
- Rough idle or inconsistent throttle response
- Incorrect fuel delivery caused by inaccurate load readings
- Poor acceleration or reduced engine performance
- Emissions-related drivability concerns
Installation Notes and Tips
Verify connector shape, terminal count, and port configuration before installation. This sensor uses a plug-in, 1-connector design with a rectangular female connector and 3 male terminals, so matching the original electrical interface is important for proper operation. Confirm the vehicle application by year and model before replacement.
Quality Assurance
Walker Products engineers this MAP sensor to OE-level specifications and tests it for accuracy, responsiveness, and long-term reliability. The design is built to handle engine bay heat, vibration, and intake contamination while maintaining stable ECM communication.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Walker Sensor Only MAP Sensor for Volvo
Walker Products Part Number 225-1378 is a Manifold Absolute Pressure (MAP) sensor built as an OE replacement for Volvo applications. It measures intake manifold pressure and sends that signal to the ECM so the engine can calculate load, fuel delivery, and ignition timing with the correct input.
The Sensor Only line from Walker focuses on direct-fit replacement sensors engineered for electrical output, pressure range, and connector fit. For Volvo S60, S90, V60, XC60, and XC90 applications, this MAP sensor supports accurate engine management and consistent drivability.
Key Features
- OE replacement Manifold Absolute Pressure Sensor
- Part Number: 225-1378
- Black connector with rectangular shape
- 1 female connector, 3 male terminals
- Plug-in fitting type for direct connection
- Plastic body construction
- 1 port design
- Built for high engine bay temperatures, vibration, and intake air contaminants
- Cross-references Standard Ignition AS529
Detailed Description
Walker 225-1378 is designed for vehicles that rely on precise manifold pressure data to manage fuel injection and ignition timing. It is engineered to meet OE specifications for signal output, pressure range, and connector fit, helping restore proper ECM input on Volvo turbocharged and non-turbo engine management systems. This part cross-references Standard Ignition AS529 for the same application.
Vehicle Fitment
- Fits 2017-2025 Volvo S90, N/A
- Fits 2015-2025 Volvo V60, N/A
- Fits 2015-2025 Volvo XC60, N/A
- Fits 2016-2025 Volvo XC90, N/A
- Fits 2015-2024 Volvo S60, N/A
- Fits 2019-2022 Volvo XC40, N/A
- Fits 2020-2021 Volvo V60 Cross Country, N/A
- Fits 2017-2018 Volvo V60 Cross Country, N/A
- Fits 2018-2021 Volvo V90, N/A
- Fits 2017-2021 Volvo V90 Cross Country, N/A
- Fits 2017-2018 Volvo S60 Cross Country, N/A
- Fits 2015-2016 Volvo S80, N/A
- Fits 2015-2016 Volvo XC70, N/A
Common Issues This Sensor Can Address
- Check engine light related to manifold pressure signal faults
- Rough idle or inconsistent throttle response
- Incorrect fuel delivery caused by inaccurate load readings
- Poor acceleration or reduced engine performance
- Emissions-related drivability concerns
Installation Notes and Tips
Verify connector shape, terminal count, and port configuration before installation. This sensor uses a plug-in, 1-connector design with a rectangular female connector and 3 male terminals, so matching the original electrical interface is important for proper operation. Confirm the vehicle application by year and model before replacement.
Quality Assurance
Walker Products engineers this MAP sensor to OE-level specifications and tests it for accuracy, responsiveness, and long-term reliability. The design is built to handle engine bay heat, vibration, and intake contamination while maintaining stable ECM communication.
