Walker 241-1200 ABS Wheel Speed Sensor - Rear
OE-Style Rear ABS Sensor for Ford and Lincoln
Walker 241-1200 is a sensor-only ABS wheel speed sensor built for rear applications on select Ford and Lincoln vehicles. It delivers the wheel speed signal the ABS module uses for braking, traction control, and stability system operation.
Walker Products Sensor Only coverage is focused on direct replacement fitment, with form, fit, and function matched to the original sensor layout for easier service work on Explorer, Flex, Taurus, MKT, and MKS applications.
Key Features
- ABS wheel speed sensor for rear position applications
- Rectangle female connector with 2 blade terminals
- 787.0 length for application-specific routing
- Built with heat-, vibration-, moisture-, and debris-resistant materials
- End-of-line tested for signal integrity, resistance, and durability
- Walker 241-1200 sensor-only replacement for OE-style service
Product Details
Walker 241-1200 is engineered to provide accurate wheel speed data to the ABS control module, helping maintain proper communication across anti-lock braking, traction control, and electronic stability control systems. The sensor housing and internal components are built for demanding road conditions, while the OE-style design supports straightforward replacement on rear axle applications. This part cross-references Standard Ignition ALS2598 for the same application.
Use Walker 241-1200 when servicing rear ABS sensor faults on 2011-2019 Ford Explorer, 2010-2019 Ford Flex, 2013-2019 Ford Taurus, 2013-2019 Lincoln MKT, and 2010-2016 Lincoln MKS. The part number 241-1200 is also commonly searched as a direct replacement ABS wheel speed sensor for these rear-position applications.
What It Helps Address
- ABS warning light caused by a failed rear wheel speed sensor
- Traction control or stability control faults tied to wheel speed signal loss
- Intermittent braking system alerts from damaged sensor wiring or connector issues
- Erratic speed data reported to the ABS module
- Service replacement for corrosion, heat damage, or road debris exposure
Installation Notes
Verify connector shape, terminal count, and sensor length before installation. This unit uses a female rectangle connector with two male blade terminals and does not include mounting hardware. Confirm rear-position application and inspect the tone ring, harness routing, and connector condition during service. For fitment searches, Walker 241-1200 is listed for rear ABS sensor replacement on Ford Explorer, Ford Flex, Ford Taurus, Lincoln MKT, and Lincoln MKS.
Quality Assurance
Walker Products builds this sensor to OE-level form, fit, and function standards and tests each unit at the end of production for signal integrity, resistance, and durability. That process supports consistent performance in ABS-equipped Ford and Lincoln vehicles.
Walker 241-1200 ABS Wheel Speed Sensor - Rear
OE-Style Rear ABS Sensor for Ford and Lincoln
Walker 241-1200 is a sensor-only ABS wheel speed sensor built for rear applications on select Ford and Lincoln vehicles. It delivers the wheel speed signal the ABS module uses for braking, traction control, and stability system operation.
Walker Products Sensor Only coverage is focused on direct replacement fitment, with form, fit, and function matched to the original sensor layout for easier service work on Explorer, Flex, Taurus, MKT, and MKS applications.
Key Features
- ABS wheel speed sensor for rear position applications
- Rectangle female connector with 2 blade terminals
- 787.0 length for application-specific routing
- Built with heat-, vibration-, moisture-, and debris-resistant materials
- End-of-line tested for signal integrity, resistance, and durability
- Walker 241-1200 sensor-only replacement for OE-style service
Product Details
Walker 241-1200 is engineered to provide accurate wheel speed data to the ABS control module, helping maintain proper communication across anti-lock braking, traction control, and electronic stability control systems. The sensor housing and internal components are built for demanding road conditions, while the OE-style design supports straightforward replacement on rear axle applications. This part cross-references Standard Ignition ALS2598 for the same application.
Use Walker 241-1200 when servicing rear ABS sensor faults on 2011-2019 Ford Explorer, 2010-2019 Ford Flex, 2013-2019 Ford Taurus, 2013-2019 Lincoln MKT, and 2010-2016 Lincoln MKS. The part number 241-1200 is also commonly searched as a direct replacement ABS wheel speed sensor for these rear-position applications.
What It Helps Address
- ABS warning light caused by a failed rear wheel speed sensor
- Traction control or stability control faults tied to wheel speed signal loss
- Intermittent braking system alerts from damaged sensor wiring or connector issues
- Erratic speed data reported to the ABS module
- Service replacement for corrosion, heat damage, or road debris exposure
Installation Notes
Verify connector shape, terminal count, and sensor length before installation. This unit uses a female rectangle connector with two male blade terminals and does not include mounting hardware. Confirm rear-position application and inspect the tone ring, harness routing, and connector condition during service. For fitment searches, Walker 241-1200 is listed for rear ABS sensor replacement on Ford Explorer, Ford Flex, Ford Taurus, Lincoln MKT, and Lincoln MKS.
Quality Assurance
Walker Products builds this sensor to OE-level form, fit, and function standards and tests each unit at the end of production for signal integrity, resistance, and durability. That process supports consistent performance in ABS-equipped Ford and Lincoln vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Rear ABS Sensor for Ford and Lincoln
Walker 241-1200 is a sensor-only ABS wheel speed sensor built for rear applications on select Ford and Lincoln vehicles. It delivers the wheel speed signal the ABS module uses for braking, traction control, and stability system operation.
Walker Products Sensor Only coverage is focused on direct replacement fitment, with form, fit, and function matched to the original sensor layout for easier service work on Explorer, Flex, Taurus, MKT, and MKS applications.
Key Features
- ABS wheel speed sensor for rear position applications
- Rectangle female connector with 2 blade terminals
- 787.0 length for application-specific routing
- Built with heat-, vibration-, moisture-, and debris-resistant materials
- End-of-line tested for signal integrity, resistance, and durability
- Walker 241-1200 sensor-only replacement for OE-style service
Product Details
Walker 241-1200 is engineered to provide accurate wheel speed data to the ABS control module, helping maintain proper communication across anti-lock braking, traction control, and electronic stability control systems. The sensor housing and internal components are built for demanding road conditions, while the OE-style design supports straightforward replacement on rear axle applications. This part cross-references Standard Ignition ALS2598 for the same application.
Use Walker 241-1200 when servicing rear ABS sensor faults on 2011-2019 Ford Explorer, 2010-2019 Ford Flex, 2013-2019 Ford Taurus, 2013-2019 Lincoln MKT, and 2010-2016 Lincoln MKS. The part number 241-1200 is also commonly searched as a direct replacement ABS wheel speed sensor for these rear-position applications.
What It Helps Address
- ABS warning light caused by a failed rear wheel speed sensor
- Traction control or stability control faults tied to wheel speed signal loss
- Intermittent braking system alerts from damaged sensor wiring or connector issues
- Erratic speed data reported to the ABS module
- Service replacement for corrosion, heat damage, or road debris exposure
Installation Notes
Verify connector shape, terminal count, and sensor length before installation. This unit uses a female rectangle connector with two male blade terminals and does not include mounting hardware. Confirm rear-position application and inspect the tone ring, harness routing, and connector condition during service. For fitment searches, Walker 241-1200 is listed for rear ABS sensor replacement on Ford Explorer, Ford Flex, Ford Taurus, Lincoln MKT, and Lincoln MKS.
Quality Assurance
Walker Products builds this sensor to OE-level form, fit, and function standards and tests each unit at the end of production for signal integrity, resistance, and durability. That process supports consistent performance in ABS-equipped Ford and Lincoln vehicles.
