Walker 241-1247 ABS Wheel Speed Sensor - Front Left
Walker ABS Wheel Speed Sensor 241-1247
Walker 241-1247 is a sensor-only ABS wheel speed sensor built for OE-level signal accuracy and direct replacement service. It is engineered for the front left position on 2007-2012 Hyundai Elantra models, with the form, fit, and electrical connection needed for dependable ABS communication.
The Sensor Only line from Walker focuses on replacement sensors that match original equipment requirements for fitment and signal output. For shops and DIY repairs, that means a straightforward option for restoring wheel speed data on the Hyundai Elantra without changing the surrounding brake hardware.
Key Features
- ABS wheel speed sensor for the front left position
- Fits 2007-2012 Hyundai Elantra, front left
- Walker part number 241-1247
- Sensor-only design for direct replacement service
- 914.0 length with rectangle female connector
- 2-terminal blade connection with male terminals
- Built with housing materials selected for heat, vibration, moisture, and road debris resistance
- End-of-line tested for signal integrity, resistance, and durability
Detailed Description
Walker 241-1247 is an ABS wheel speed sensor for 2007-2012 Hyundai Elantra front left applications. It provides the wheel speed signal used by the ABS control module, helping the braking system process accurate data for ABS, traction control, and electronic stability control operation. The sensor-only format keeps the replacement focused on the failed component while maintaining OE-style form and electrical function.
This part cross-references Standard Ignition ALS1615 and HOLSTEIN 2ABS0538 for the same application. If you are sourcing a Hyundai Elantra front left ABS sensor, Walker 241-1247 gives you a direct-fit replacement path with the connector style and terminal layout needed for proper installation.
What It Helps Fix
- ABS warning light caused by a failed front left wheel speed sensor
- Loss of wheel speed signal to the ABS module
- Traction control or stability control faults tied to sensor input
- Intermittent braking system fault codes from damaged wiring or sensor housing
- Erratic speed data from contamination, vibration, or moisture exposure
Installation Notes and Tips
Verify the connector shape, terminal count, and mounting location before installation. This sensor uses a rectangle female connector, 2 blade terminals, and no mounting hardware is included. Inspect the tone ring, harness routing, and connector condition during service to confirm the repair addresses the source of the fault. For best results, clear stored ABS codes after installation and road test the vehicle to confirm stable wheel speed data.
Quality Assurance
Walker Products tests each unit at the end of production to confirm signal integrity, resistance, and durability. The sensor is built to meet OE-level performance expectations for reliable operation in demanding driving conditions.
Walker 241-1247 ABS Wheel Speed Sensor - Front Left
Walker ABS Wheel Speed Sensor 241-1247
Walker 241-1247 is a sensor-only ABS wheel speed sensor built for OE-level signal accuracy and direct replacement service. It is engineered for the front left position on 2007-2012 Hyundai Elantra models, with the form, fit, and electrical connection needed for dependable ABS communication.
The Sensor Only line from Walker focuses on replacement sensors that match original equipment requirements for fitment and signal output. For shops and DIY repairs, that means a straightforward option for restoring wheel speed data on the Hyundai Elantra without changing the surrounding brake hardware.
Key Features
- ABS wheel speed sensor for the front left position
- Fits 2007-2012 Hyundai Elantra, front left
- Walker part number 241-1247
- Sensor-only design for direct replacement service
- 914.0 length with rectangle female connector
- 2-terminal blade connection with male terminals
- Built with housing materials selected for heat, vibration, moisture, and road debris resistance
- End-of-line tested for signal integrity, resistance, and durability
Detailed Description
Walker 241-1247 is an ABS wheel speed sensor for 2007-2012 Hyundai Elantra front left applications. It provides the wheel speed signal used by the ABS control module, helping the braking system process accurate data for ABS, traction control, and electronic stability control operation. The sensor-only format keeps the replacement focused on the failed component while maintaining OE-style form and electrical function.
This part cross-references Standard Ignition ALS1615 and HOLSTEIN 2ABS0538 for the same application. If you are sourcing a Hyundai Elantra front left ABS sensor, Walker 241-1247 gives you a direct-fit replacement path with the connector style and terminal layout needed for proper installation.
What It Helps Fix
- ABS warning light caused by a failed front left wheel speed sensor
- Loss of wheel speed signal to the ABS module
- Traction control or stability control faults tied to sensor input
- Intermittent braking system fault codes from damaged wiring or sensor housing
- Erratic speed data from contamination, vibration, or moisture exposure
Installation Notes and Tips
Verify the connector shape, terminal count, and mounting location before installation. This sensor uses a rectangle female connector, 2 blade terminals, and no mounting hardware is included. Inspect the tone ring, harness routing, and connector condition during service to confirm the repair addresses the source of the fault. For best results, clear stored ABS codes after installation and road test the vehicle to confirm stable wheel speed data.
Quality Assurance
Walker Products tests each unit at the end of production to confirm signal integrity, resistance, and durability. The sensor is built to meet OE-level performance expectations for reliable operation in demanding driving conditions.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Walker ABS Wheel Speed Sensor 241-1247
Walker 241-1247 is a sensor-only ABS wheel speed sensor built for OE-level signal accuracy and direct replacement service. It is engineered for the front left position on 2007-2012 Hyundai Elantra models, with the form, fit, and electrical connection needed for dependable ABS communication.
The Sensor Only line from Walker focuses on replacement sensors that match original equipment requirements for fitment and signal output. For shops and DIY repairs, that means a straightforward option for restoring wheel speed data on the Hyundai Elantra without changing the surrounding brake hardware.
Key Features
- ABS wheel speed sensor for the front left position
- Fits 2007-2012 Hyundai Elantra, front left
- Walker part number 241-1247
- Sensor-only design for direct replacement service
- 914.0 length with rectangle female connector
- 2-terminal blade connection with male terminals
- Built with housing materials selected for heat, vibration, moisture, and road debris resistance
- End-of-line tested for signal integrity, resistance, and durability
Detailed Description
Walker 241-1247 is an ABS wheel speed sensor for 2007-2012 Hyundai Elantra front left applications. It provides the wheel speed signal used by the ABS control module, helping the braking system process accurate data for ABS, traction control, and electronic stability control operation. The sensor-only format keeps the replacement focused on the failed component while maintaining OE-style form and electrical function.
This part cross-references Standard Ignition ALS1615 and HOLSTEIN 2ABS0538 for the same application. If you are sourcing a Hyundai Elantra front left ABS sensor, Walker 241-1247 gives you a direct-fit replacement path with the connector style and terminal layout needed for proper installation.
What It Helps Fix
- ABS warning light caused by a failed front left wheel speed sensor
- Loss of wheel speed signal to the ABS module
- Traction control or stability control faults tied to sensor input
- Intermittent braking system fault codes from damaged wiring or sensor housing
- Erratic speed data from contamination, vibration, or moisture exposure
Installation Notes and Tips
Verify the connector shape, terminal count, and mounting location before installation. This sensor uses a rectangle female connector, 2 blade terminals, and no mounting hardware is included. Inspect the tone ring, harness routing, and connector condition during service to confirm the repair addresses the source of the fault. For best results, clear stored ABS codes after installation and road test the vehicle to confirm stable wheel speed data.
Quality Assurance
Walker Products tests each unit at the end of production to confirm signal integrity, resistance, and durability. The sensor is built to meet OE-level performance expectations for reliable operation in demanding driving conditions.
