Walker 241-1279 ABS Wheel Speed Sensor - Front or Front Right
ABS Wheel Speed Sensor for Super Duty Front Right
Walker 241-1279 is an ABS wheel speed sensor built for precise signal delivery in the braking and stability systems on select Ford Super Duty trucks. It matches OE form, fit, and function for a direct replacement on the front right position.
Compatible with 2007-2010 Ford F-250 Super Duty and 2007-2010 Ford F-350 Super Duty, this Sensor Only line from Walker focuses on the sensor component itself for service work that calls for a clean, accurate replacement. The 241-1279 part number is also a useful reference when verifying the correct front right ABS sensor for these applications.
Key Features
- ABS wheel speed sensor for front right placement
- Walker Sensor Only product line
- OE-style form, fit, and function
- Female connector with 2 terminals
- Circle connector shape for application matching
- 1165.0 length for proper routing and installation
- Built with heat-, vibration-, moisture-, and debris-resistant materials
- End-of-line tested for signal integrity and resistance
Detailed Description
Walker Products ABS Wheel Speed Sensors are engineered to provide accurate wheel speed data to the ABS control module, which is essential for ABS, traction control, and electronic stability control operation. On 2007-2010 Ford F-250 Super Duty and 2007-2010 Ford F-350 Super Duty front right applications, Walker 241-1279 is built to match the original sensor’s electrical and physical requirements for straightforward replacement and dependable communication.
The Sensor Only line is focused on the sensing element needed for repair work where the existing harness or related components are not being replaced. The 241-1279 part number is commonly used in catalog lookup and cross-reference checks for these Ford Super Duty fitments.
This part cross-references Standard Ignition ALS1883 and HOLSTEIN 2ABS1421 for the same application.
What It Helps Fix
- ABS warning light caused by a failed front right wheel speed sensor
- Traction control or stability control faults tied to incorrect wheel speed data
- Intermittent ABS operation from heat, vibration, or moisture exposure
- Signal loss from damaged sensor internals or worn electrical connections
- Brake system fault codes related to the front right sensor circuit
Installation Notes and Tips
Verify the connector style, terminal count, and sensor length before installation. This sensor uses a female connector, 2 terminals, and a circular connector shape, so matching the OE connector is important for proper fitment. Confirm front right placement on the vehicle and inspect the mounting area, wiring path, and tone ring or hub components before final assembly.
For service accuracy, compare the old sensor to Walker 241-1279 before installation on Ford F-250 Super Duty or Ford F-350 Super Duty models. Clean the mounting surface and route the harness to avoid contact with moving suspension or brake components.
Quality Assurance
Walker Products tests each unit at the end of production to verify signal integrity, resistance, and durability. The sensor is built with robust housing materials to withstand demanding road and weather conditions while maintaining OE-level performance expectations.
Original: $65.98
-65%$65.98
$23.09Walker 241-1279 ABS Wheel Speed Sensor - Front or Front Right
ABS Wheel Speed Sensor for Super Duty Front Right
Walker 241-1279 is an ABS wheel speed sensor built for precise signal delivery in the braking and stability systems on select Ford Super Duty trucks. It matches OE form, fit, and function for a direct replacement on the front right position.
Compatible with 2007-2010 Ford F-250 Super Duty and 2007-2010 Ford F-350 Super Duty, this Sensor Only line from Walker focuses on the sensor component itself for service work that calls for a clean, accurate replacement. The 241-1279 part number is also a useful reference when verifying the correct front right ABS sensor for these applications.
Key Features
- ABS wheel speed sensor for front right placement
- Walker Sensor Only product line
- OE-style form, fit, and function
- Female connector with 2 terminals
- Circle connector shape for application matching
- 1165.0 length for proper routing and installation
- Built with heat-, vibration-, moisture-, and debris-resistant materials
- End-of-line tested for signal integrity and resistance
Detailed Description
Walker Products ABS Wheel Speed Sensors are engineered to provide accurate wheel speed data to the ABS control module, which is essential for ABS, traction control, and electronic stability control operation. On 2007-2010 Ford F-250 Super Duty and 2007-2010 Ford F-350 Super Duty front right applications, Walker 241-1279 is built to match the original sensor’s electrical and physical requirements for straightforward replacement and dependable communication.
The Sensor Only line is focused on the sensing element needed for repair work where the existing harness or related components are not being replaced. The 241-1279 part number is commonly used in catalog lookup and cross-reference checks for these Ford Super Duty fitments.
This part cross-references Standard Ignition ALS1883 and HOLSTEIN 2ABS1421 for the same application.
What It Helps Fix
- ABS warning light caused by a failed front right wheel speed sensor
- Traction control or stability control faults tied to incorrect wheel speed data
- Intermittent ABS operation from heat, vibration, or moisture exposure
- Signal loss from damaged sensor internals or worn electrical connections
- Brake system fault codes related to the front right sensor circuit
Installation Notes and Tips
Verify the connector style, terminal count, and sensor length before installation. This sensor uses a female connector, 2 terminals, and a circular connector shape, so matching the OE connector is important for proper fitment. Confirm front right placement on the vehicle and inspect the mounting area, wiring path, and tone ring or hub components before final assembly.
For service accuracy, compare the old sensor to Walker 241-1279 before installation on Ford F-250 Super Duty or Ford F-350 Super Duty models. Clean the mounting surface and route the harness to avoid contact with moving suspension or brake components.
Quality Assurance
Walker Products tests each unit at the end of production to verify signal integrity, resistance, and durability. The sensor is built with robust housing materials to withstand demanding road and weather conditions while maintaining OE-level performance expectations.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
ABS Wheel Speed Sensor for Super Duty Front Right
Walker 241-1279 is an ABS wheel speed sensor built for precise signal delivery in the braking and stability systems on select Ford Super Duty trucks. It matches OE form, fit, and function for a direct replacement on the front right position.
Compatible with 2007-2010 Ford F-250 Super Duty and 2007-2010 Ford F-350 Super Duty, this Sensor Only line from Walker focuses on the sensor component itself for service work that calls for a clean, accurate replacement. The 241-1279 part number is also a useful reference when verifying the correct front right ABS sensor for these applications.
Key Features
- ABS wheel speed sensor for front right placement
- Walker Sensor Only product line
- OE-style form, fit, and function
- Female connector with 2 terminals
- Circle connector shape for application matching
- 1165.0 length for proper routing and installation
- Built with heat-, vibration-, moisture-, and debris-resistant materials
- End-of-line tested for signal integrity and resistance
Detailed Description
Walker Products ABS Wheel Speed Sensors are engineered to provide accurate wheel speed data to the ABS control module, which is essential for ABS, traction control, and electronic stability control operation. On 2007-2010 Ford F-250 Super Duty and 2007-2010 Ford F-350 Super Duty front right applications, Walker 241-1279 is built to match the original sensor’s electrical and physical requirements for straightforward replacement and dependable communication.
The Sensor Only line is focused on the sensing element needed for repair work where the existing harness or related components are not being replaced. The 241-1279 part number is commonly used in catalog lookup and cross-reference checks for these Ford Super Duty fitments.
This part cross-references Standard Ignition ALS1883 and HOLSTEIN 2ABS1421 for the same application.
What It Helps Fix
- ABS warning light caused by a failed front right wheel speed sensor
- Traction control or stability control faults tied to incorrect wheel speed data
- Intermittent ABS operation from heat, vibration, or moisture exposure
- Signal loss from damaged sensor internals or worn electrical connections
- Brake system fault codes related to the front right sensor circuit
Installation Notes and Tips
Verify the connector style, terminal count, and sensor length before installation. This sensor uses a female connector, 2 terminals, and a circular connector shape, so matching the OE connector is important for proper fitment. Confirm front right placement on the vehicle and inspect the mounting area, wiring path, and tone ring or hub components before final assembly.
For service accuracy, compare the old sensor to Walker 241-1279 before installation on Ford F-250 Super Duty or Ford F-350 Super Duty models. Clean the mounting surface and route the harness to avoid contact with moving suspension or brake components.
Quality Assurance
Walker Products tests each unit at the end of production to verify signal integrity, resistance, and durability. The sensor is built with robust housing materials to withstand demanding road and weather conditions while maintaining OE-level performance expectations.
