Walker 256-1050 Engine Oil Pressure Switch
Engine Oil Pressure Switch for OE-Style Monitoring
Walker 256-1050 is an OE replacement engine oil pressure switch built to monitor lubrication pressure and send the proper signal to the ECU or dashboard warning circuit when pressure drops below safe limits. It is a direct-fit replacement for select Jeep Cherokee, Jeep Compass, Jeep Renegade, Ram ProMaster City, Fiat 500X, and Chrysler 200 applications.
Built with brass and plastic construction, a black finish, a blade terminal, and a single female connector with one male terminal, this switch is made to match factory thread, terminal, and electrical response requirements. Walker 256-1050 is a practical choice when the oil warning light is flickering, reading falsely, or not responding during an actual low-pressure condition.
Key Features
- OE replacement engine oil pressure switch
- Monitors oil pressure and triggers warning output when pressure falls below safe limits
- Direct-fit design for factory mounting locations such as the engine block or oil filter housing
- Brass and plastic construction for engine-bay exposure
- Blade terminal with 1 connector and 1 terminal
- Matches OE specifications for pressure threshold, thread size, and electrical response
Detailed Description
Walker 256-1050 is engineered for accurate oil pressure signaling in vehicles that rely on a switch-style sender for warning light or ECU input. The unit is built to align with factory specifications so it threads into the original location and connects to existing wiring without modification. For drivers servicing a Jeep Cherokee oil pressure switch issue, a Jeep Compass oil pressure warning fault, or a Ram ProMaster City oil light concern, this part provides a direct replacement path.
This switch is also listed for Jeep Renegade, Fiat 500X, and Chrysler 200 applications. If you are searching for Walker 256-1050 oil pressure switch replacement or an OE-style engine oil pressure switch for these vehicles, this part is built for the original electrical and mechanical interface.
Common Issues It Can Address
- Oil warning light flickering or staying on
- False low-oil-pressure warnings
- No warning signal when pressure drops
- Faulty oil pressure switch electrical response
- Intermittent dashboard oil pressure indication
Installation Notes and Tips
Install the switch in the factory oil pressure switch location and verify the connector style before installation. Confirm thread size, terminal orientation, and sealing surface match the original part. After installation, check for proper warning light operation and inspect the area for oil seepage.
Compatible With 2017-2023 Jeep Cherokee, 2017-2022 Jeep Compass, 2018-2022 Ram ProMaster City, 2017-2021 Jeep Renegade, 2017-2018 Fiat 500X, and 2017 Chrysler 200. Walker 256-1050 is a direct replacement for these listed applications.
Quality Assurance
Walker manufactures this oil pressure switch to OE specifications for fit, thread engagement, terminal type, and electrical response. High-temperature and oil-resistant materials are used to support consistent operation in engine environments.
Original: $54.73
-65%$54.73
$19.16Walker 256-1050 Engine Oil Pressure Switch
Engine Oil Pressure Switch for OE-Style Monitoring
Walker 256-1050 is an OE replacement engine oil pressure switch built to monitor lubrication pressure and send the proper signal to the ECU or dashboard warning circuit when pressure drops below safe limits. It is a direct-fit replacement for select Jeep Cherokee, Jeep Compass, Jeep Renegade, Ram ProMaster City, Fiat 500X, and Chrysler 200 applications.
Built with brass and plastic construction, a black finish, a blade terminal, and a single female connector with one male terminal, this switch is made to match factory thread, terminal, and electrical response requirements. Walker 256-1050 is a practical choice when the oil warning light is flickering, reading falsely, or not responding during an actual low-pressure condition.
Key Features
- OE replacement engine oil pressure switch
- Monitors oil pressure and triggers warning output when pressure falls below safe limits
- Direct-fit design for factory mounting locations such as the engine block or oil filter housing
- Brass and plastic construction for engine-bay exposure
- Blade terminal with 1 connector and 1 terminal
- Matches OE specifications for pressure threshold, thread size, and electrical response
Detailed Description
Walker 256-1050 is engineered for accurate oil pressure signaling in vehicles that rely on a switch-style sender for warning light or ECU input. The unit is built to align with factory specifications so it threads into the original location and connects to existing wiring without modification. For drivers servicing a Jeep Cherokee oil pressure switch issue, a Jeep Compass oil pressure warning fault, or a Ram ProMaster City oil light concern, this part provides a direct replacement path.
This switch is also listed for Jeep Renegade, Fiat 500X, and Chrysler 200 applications. If you are searching for Walker 256-1050 oil pressure switch replacement or an OE-style engine oil pressure switch for these vehicles, this part is built for the original electrical and mechanical interface.
Common Issues It Can Address
- Oil warning light flickering or staying on
- False low-oil-pressure warnings
- No warning signal when pressure drops
- Faulty oil pressure switch electrical response
- Intermittent dashboard oil pressure indication
Installation Notes and Tips
Install the switch in the factory oil pressure switch location and verify the connector style before installation. Confirm thread size, terminal orientation, and sealing surface match the original part. After installation, check for proper warning light operation and inspect the area for oil seepage.
Compatible With 2017-2023 Jeep Cherokee, 2017-2022 Jeep Compass, 2018-2022 Ram ProMaster City, 2017-2021 Jeep Renegade, 2017-2018 Fiat 500X, and 2017 Chrysler 200. Walker 256-1050 is a direct replacement for these listed applications.
Quality Assurance
Walker manufactures this oil pressure switch to OE specifications for fit, thread engagement, terminal type, and electrical response. High-temperature and oil-resistant materials are used to support consistent operation in engine environments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Oil Pressure Switch for OE-Style Monitoring
Walker 256-1050 is an OE replacement engine oil pressure switch built to monitor lubrication pressure and send the proper signal to the ECU or dashboard warning circuit when pressure drops below safe limits. It is a direct-fit replacement for select Jeep Cherokee, Jeep Compass, Jeep Renegade, Ram ProMaster City, Fiat 500X, and Chrysler 200 applications.
Built with brass and plastic construction, a black finish, a blade terminal, and a single female connector with one male terminal, this switch is made to match factory thread, terminal, and electrical response requirements. Walker 256-1050 is a practical choice when the oil warning light is flickering, reading falsely, or not responding during an actual low-pressure condition.
Key Features
- OE replacement engine oil pressure switch
- Monitors oil pressure and triggers warning output when pressure falls below safe limits
- Direct-fit design for factory mounting locations such as the engine block or oil filter housing
- Brass and plastic construction for engine-bay exposure
- Blade terminal with 1 connector and 1 terminal
- Matches OE specifications for pressure threshold, thread size, and electrical response
Detailed Description
Walker 256-1050 is engineered for accurate oil pressure signaling in vehicles that rely on a switch-style sender for warning light or ECU input. The unit is built to align with factory specifications so it threads into the original location and connects to existing wiring without modification. For drivers servicing a Jeep Cherokee oil pressure switch issue, a Jeep Compass oil pressure warning fault, or a Ram ProMaster City oil light concern, this part provides a direct replacement path.
This switch is also listed for Jeep Renegade, Fiat 500X, and Chrysler 200 applications. If you are searching for Walker 256-1050 oil pressure switch replacement or an OE-style engine oil pressure switch for these vehicles, this part is built for the original electrical and mechanical interface.
Common Issues It Can Address
- Oil warning light flickering or staying on
- False low-oil-pressure warnings
- No warning signal when pressure drops
- Faulty oil pressure switch electrical response
- Intermittent dashboard oil pressure indication
Installation Notes and Tips
Install the switch in the factory oil pressure switch location and verify the connector style before installation. Confirm thread size, terminal orientation, and sealing surface match the original part. After installation, check for proper warning light operation and inspect the area for oil seepage.
Compatible With 2017-2023 Jeep Cherokee, 2017-2022 Jeep Compass, 2018-2022 Ram ProMaster City, 2017-2021 Jeep Renegade, 2017-2018 Fiat 500X, and 2017 Chrysler 200. Walker 256-1050 is a direct replacement for these listed applications.
Quality Assurance
Walker manufactures this oil pressure switch to OE specifications for fit, thread engagement, terminal type, and electrical response. High-temperature and oil-resistant materials are used to support consistent operation in engine environments.
