Walker 270-1120 Fog Light Socket
Walker 270-1120 Fog Light Socket
Walker 270-1120 is an OE-style fog light socket built for direct electrical repair on vehicles with damaged, heat-affected, or corroded connector ends. It uses a molded female blade terminal design and pre-terminated leads to restore a stable connection in lighting circuits without modifying the mating component.
Key Features
- OE replacement fog light socket for electrical connector repair
- Female blade terminal design with 2 terminals
- Wiring harness length: 250.00
- High-quality copper wire and insulation for OE-level current capacity
- Built for resistance to heat, oil, and chemical exposure
- Factory-style connector housing for a precise fit
- Walker part number 270-1120 for catalog and service lookup
Detailed Description
This Walker fog light socket is engineered for repair work where the original connector has failed from corrosion, vibration, or thermal damage. The pre-terminated pigtail design supports standard crimp or solder repair methods and restores a secure electrical path for fog lamp circuits. Walker 270-1120 is a practical replacement for service technicians and DIY repairs on a wide range of vehicles, including Acura ILX, Audi A3, BMW 328i, and Chevrolet Silverado 1500 applications.
Walker Products electrical pigtails are built to match factory-style connector geometry and wire performance, helping maintain reliable contact in demanding locations such as the engine bay, underbody, and transmission tunnel. The part number 270-1120 is also useful when searching for an OE replacement fog light socket for BMW 335i, Buick Regal, or GMC Sierra 1500 lighting repairs.
Common Repair Uses
- Broken or melted fog light connector housing
- Intermittent fog lamp operation from loose terminals
- Corroded or heat-damaged wiring at the lamp socket
- Restoring factory-style electrical continuity after harness damage
- Repairing lighting circuits on Acura, Audi, BMW, Chevrolet, GMC, and Buick vehicles
Installation Notes and Tips
Install using standard crimp or solder repair methods and match the existing wire routing before final connection. Verify terminal orientation and connector engagement before powering the circuit. Confirm vehicle application by year, make, and model before ordering; this socket is listed for many vehicles, including 2010-2016 Audi A5, 2010-2016 BMW 328i, and 2008-2015 Chevrolet Silverado 1500.
Quality Assurance
Walker builds this electrical pigtail with copper conductors and OE-style insulation to meet factory specifications for current handling, flexibility, and resistance to heat, oil, and chemicals. The design supports dependable connector repair in lighting systems where long-term electrical stability matters.
Original: $16.67
-65%$16.67
$5.83Walker 270-1120 Fog Light Socket
Walker 270-1120 Fog Light Socket
Walker 270-1120 is an OE-style fog light socket built for direct electrical repair on vehicles with damaged, heat-affected, or corroded connector ends. It uses a molded female blade terminal design and pre-terminated leads to restore a stable connection in lighting circuits without modifying the mating component.
Key Features
- OE replacement fog light socket for electrical connector repair
- Female blade terminal design with 2 terminals
- Wiring harness length: 250.00
- High-quality copper wire and insulation for OE-level current capacity
- Built for resistance to heat, oil, and chemical exposure
- Factory-style connector housing for a precise fit
- Walker part number 270-1120 for catalog and service lookup
Detailed Description
This Walker fog light socket is engineered for repair work where the original connector has failed from corrosion, vibration, or thermal damage. The pre-terminated pigtail design supports standard crimp or solder repair methods and restores a secure electrical path for fog lamp circuits. Walker 270-1120 is a practical replacement for service technicians and DIY repairs on a wide range of vehicles, including Acura ILX, Audi A3, BMW 328i, and Chevrolet Silverado 1500 applications.
Walker Products electrical pigtails are built to match factory-style connector geometry and wire performance, helping maintain reliable contact in demanding locations such as the engine bay, underbody, and transmission tunnel. The part number 270-1120 is also useful when searching for an OE replacement fog light socket for BMW 335i, Buick Regal, or GMC Sierra 1500 lighting repairs.
Common Repair Uses
- Broken or melted fog light connector housing
- Intermittent fog lamp operation from loose terminals
- Corroded or heat-damaged wiring at the lamp socket
- Restoring factory-style electrical continuity after harness damage
- Repairing lighting circuits on Acura, Audi, BMW, Chevrolet, GMC, and Buick vehicles
Installation Notes and Tips
Install using standard crimp or solder repair methods and match the existing wire routing before final connection. Verify terminal orientation and connector engagement before powering the circuit. Confirm vehicle application by year, make, and model before ordering; this socket is listed for many vehicles, including 2010-2016 Audi A5, 2010-2016 BMW 328i, and 2008-2015 Chevrolet Silverado 1500.
Quality Assurance
Walker builds this electrical pigtail with copper conductors and OE-style insulation to meet factory specifications for current handling, flexibility, and resistance to heat, oil, and chemicals. The design supports dependable connector repair in lighting systems where long-term electrical stability matters.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Walker 270-1120 Fog Light Socket
Walker 270-1120 is an OE-style fog light socket built for direct electrical repair on vehicles with damaged, heat-affected, or corroded connector ends. It uses a molded female blade terminal design and pre-terminated leads to restore a stable connection in lighting circuits without modifying the mating component.
Key Features
- OE replacement fog light socket for electrical connector repair
- Female blade terminal design with 2 terminals
- Wiring harness length: 250.00
- High-quality copper wire and insulation for OE-level current capacity
- Built for resistance to heat, oil, and chemical exposure
- Factory-style connector housing for a precise fit
- Walker part number 270-1120 for catalog and service lookup
Detailed Description
This Walker fog light socket is engineered for repair work where the original connector has failed from corrosion, vibration, or thermal damage. The pre-terminated pigtail design supports standard crimp or solder repair methods and restores a secure electrical path for fog lamp circuits. Walker 270-1120 is a practical replacement for service technicians and DIY repairs on a wide range of vehicles, including Acura ILX, Audi A3, BMW 328i, and Chevrolet Silverado 1500 applications.
Walker Products electrical pigtails are built to match factory-style connector geometry and wire performance, helping maintain reliable contact in demanding locations such as the engine bay, underbody, and transmission tunnel. The part number 270-1120 is also useful when searching for an OE replacement fog light socket for BMW 335i, Buick Regal, or GMC Sierra 1500 lighting repairs.
Common Repair Uses
- Broken or melted fog light connector housing
- Intermittent fog lamp operation from loose terminals
- Corroded or heat-damaged wiring at the lamp socket
- Restoring factory-style electrical continuity after harness damage
- Repairing lighting circuits on Acura, Audi, BMW, Chevrolet, GMC, and Buick vehicles
Installation Notes and Tips
Install using standard crimp or solder repair methods and match the existing wire routing before final connection. Verify terminal orientation and connector engagement before powering the circuit. Confirm vehicle application by year, make, and model before ordering; this socket is listed for many vehicles, including 2010-2016 Audi A5, 2010-2016 BMW 328i, and 2008-2015 Chevrolet Silverado 1500.
Quality Assurance
Walker builds this electrical pigtail with copper conductors and OE-style insulation to meet factory specifications for current handling, flexibility, and resistance to heat, oil, and chemicals. The design supports dependable connector repair in lighting systems where long-term electrical stability matters.
