Walker 270-1128 Electrical Pigtail
OE-Style Electrical Pigtail for A/C Repair
Walker 270-1128 is an OE replacement electrical pigtail built to restore damaged connector ends in vehicle wiring repairs. It uses molded OE-style housing and pre-terminated leads to match factory sensor, coil, injector, and switch connections where heat, corrosion, or wear has damaged the original plug.
With 2-pin male terminals and a 200.00 wiring harness length, this connector repair lead is suited for direct splice repairs on A/C compressor clutch coil circuits. It is a practical choice for Chevrolet Express, GMC Savana, Silverado, Sierra, Tahoe, Yukon, and other GM applications that need a factory-style electrical connection.
Key Features
- OE replacement electrical pigtail for connector repair
- 2-pin male terminal design
- 200.00 wiring harness length
- Molded OE-style connector housing for factory-style fit
- Copper wire and insulation selected for heat, oil, and chemical resistance
- Direct repair solution for damaged or corroded harness ends
- Walker 270-1128 for A/C compressor clutch coil connector service
Detailed Description
Walker Products electrical pigtails are engineered to replace damaged wiring harness connectors without modifying the mating component. The pre-terminated leads simplify repair work, while the OE-style housing helps maintain a secure connection at the vehicle side of the circuit. Walker 270-1128 is designed for electrical repairs where the original connector has become brittle, overheated, or contaminated.
This part cross-references 12101937 for the same application. It is a direct-fit repair option for long-tail searches such as A/C compressor clutch coil connector pigtail for Chevrolet Express 2500, GMC Savana 3500 electrical connector repair, and Silverado 1500 A/C clutch coil wiring pigtail replacement.
Common Repair Uses
- Broken or cracked A/C compressor clutch coil connector
- Corroded terminals causing intermittent electrical contact
- Heat-damaged wiring near the engine bay or underbody
- Failed harness end on GM truck and van A/C circuits
- Electrical repair on Chevrolet Camaro, Tahoe, or GMC Yukon connector ends
Installation Notes
Install using standard crimp or solder repair methods and match the wire repair to the original circuit layout. Verify terminal orientation, pin count, and connector style before splicing. This pigtail is listed for A/C compressor clutch coil connector applications across multiple Chevrolet and GMC platforms, including Express, Savana, Silverado, Sierra, Suburban, Tahoe, Yukon, Camaro, and related GM vehicles.
Quality Assurance
Walker builds these pigtails as OE replacement components with copper conductors and insulation specified for current capacity, flexibility, and resistance to heat, oil, and chemicals. The design supports reliable electrical continuity in repair areas exposed to vibration and environmental stress.
Original: $27.91
-65%$27.91
$9.77Walker 270-1128 Electrical Pigtail
OE-Style Electrical Pigtail for A/C Repair
Walker 270-1128 is an OE replacement electrical pigtail built to restore damaged connector ends in vehicle wiring repairs. It uses molded OE-style housing and pre-terminated leads to match factory sensor, coil, injector, and switch connections where heat, corrosion, or wear has damaged the original plug.
With 2-pin male terminals and a 200.00 wiring harness length, this connector repair lead is suited for direct splice repairs on A/C compressor clutch coil circuits. It is a practical choice for Chevrolet Express, GMC Savana, Silverado, Sierra, Tahoe, Yukon, and other GM applications that need a factory-style electrical connection.
Key Features
- OE replacement electrical pigtail for connector repair
- 2-pin male terminal design
- 200.00 wiring harness length
- Molded OE-style connector housing for factory-style fit
- Copper wire and insulation selected for heat, oil, and chemical resistance
- Direct repair solution for damaged or corroded harness ends
- Walker 270-1128 for A/C compressor clutch coil connector service
Detailed Description
Walker Products electrical pigtails are engineered to replace damaged wiring harness connectors without modifying the mating component. The pre-terminated leads simplify repair work, while the OE-style housing helps maintain a secure connection at the vehicle side of the circuit. Walker 270-1128 is designed for electrical repairs where the original connector has become brittle, overheated, or contaminated.
This part cross-references 12101937 for the same application. It is a direct-fit repair option for long-tail searches such as A/C compressor clutch coil connector pigtail for Chevrolet Express 2500, GMC Savana 3500 electrical connector repair, and Silverado 1500 A/C clutch coil wiring pigtail replacement.
Common Repair Uses
- Broken or cracked A/C compressor clutch coil connector
- Corroded terminals causing intermittent electrical contact
- Heat-damaged wiring near the engine bay or underbody
- Failed harness end on GM truck and van A/C circuits
- Electrical repair on Chevrolet Camaro, Tahoe, or GMC Yukon connector ends
Installation Notes
Install using standard crimp or solder repair methods and match the wire repair to the original circuit layout. Verify terminal orientation, pin count, and connector style before splicing. This pigtail is listed for A/C compressor clutch coil connector applications across multiple Chevrolet and GMC platforms, including Express, Savana, Silverado, Sierra, Suburban, Tahoe, Yukon, Camaro, and related GM vehicles.
Quality Assurance
Walker builds these pigtails as OE replacement components with copper conductors and insulation specified for current capacity, flexibility, and resistance to heat, oil, and chemicals. The design supports reliable electrical continuity in repair areas exposed to vibration and environmental stress.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Electrical Pigtail for A/C Repair
Walker 270-1128 is an OE replacement electrical pigtail built to restore damaged connector ends in vehicle wiring repairs. It uses molded OE-style housing and pre-terminated leads to match factory sensor, coil, injector, and switch connections where heat, corrosion, or wear has damaged the original plug.
With 2-pin male terminals and a 200.00 wiring harness length, this connector repair lead is suited for direct splice repairs on A/C compressor clutch coil circuits. It is a practical choice for Chevrolet Express, GMC Savana, Silverado, Sierra, Tahoe, Yukon, and other GM applications that need a factory-style electrical connection.
Key Features
- OE replacement electrical pigtail for connector repair
- 2-pin male terminal design
- 200.00 wiring harness length
- Molded OE-style connector housing for factory-style fit
- Copper wire and insulation selected for heat, oil, and chemical resistance
- Direct repair solution for damaged or corroded harness ends
- Walker 270-1128 for A/C compressor clutch coil connector service
Detailed Description
Walker Products electrical pigtails are engineered to replace damaged wiring harness connectors without modifying the mating component. The pre-terminated leads simplify repair work, while the OE-style housing helps maintain a secure connection at the vehicle side of the circuit. Walker 270-1128 is designed for electrical repairs where the original connector has become brittle, overheated, or contaminated.
This part cross-references 12101937 for the same application. It is a direct-fit repair option for long-tail searches such as A/C compressor clutch coil connector pigtail for Chevrolet Express 2500, GMC Savana 3500 electrical connector repair, and Silverado 1500 A/C clutch coil wiring pigtail replacement.
Common Repair Uses
- Broken or cracked A/C compressor clutch coil connector
- Corroded terminals causing intermittent electrical contact
- Heat-damaged wiring near the engine bay or underbody
- Failed harness end on GM truck and van A/C circuits
- Electrical repair on Chevrolet Camaro, Tahoe, or GMC Yukon connector ends
Installation Notes
Install using standard crimp or solder repair methods and match the wire repair to the original circuit layout. Verify terminal orientation, pin count, and connector style before splicing. This pigtail is listed for A/C compressor clutch coil connector applications across multiple Chevrolet and GMC platforms, including Express, Savana, Silverado, Sierra, Suburban, Tahoe, Yukon, Camaro, and related GM vehicles.
Quality Assurance
Walker builds these pigtails as OE replacement components with copper conductors and insulation specified for current capacity, flexibility, and resistance to heat, oil, and chemicals. The design supports reliable electrical continuity in repair areas exposed to vibration and environmental stress.