Walker 924-6003 Spark Plug Wire Set
Walker High Performance Spark Plug Wire Set 924-6003
Walker High Performance 924-6003 is a spark plug wire set for GM V8 applications that need reliable ignition transfer and a direct-fit replacement path. It is built with 8.8mm high-performance silicone construction and 135-degree boots for tighter routing around heat and engine components.
Key Features
- 8.8mm high-performance silicone wire construction
- 135-degree boot design for improved clearance in tight engine bays
- Direct replacement for a wide range of Cadillac, Chevrolet, GMC, Buick, Pontiac, Saab, and Hummer applications
- Compatible with round-coil and specific stamped-coil configurations noted in fitment
- Walker High Performance part number 924-6003 for catalog lookup and ordering
Detailed Description
This ignition wire set is listed for a broad range of GM trucks, SUVs, performance cars, and vans, including Chevrolet Silverado 1500, Tahoe, Corvette, Camaro, and GMC Sierra applications. It also covers select Cadillac Escalade, CTS, and CT5 models, along with other supported vehicles from 1999 through 2022. The Walker High Performance line focuses on ignition components for demanding street and truck use, and this part number 924-6003 is cataloged for multiple engine and coil-pack layouts shown in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Misfires caused by worn or heat-damaged plug wires
- Hard starting related to weak spark delivery
- Intermittent ignition performance under load
- Routing issues in engines that require 135-degree boot clearance
- Replacement needs for aging GM ignition wire sets
Installation Notes and Tips
Verify engine configuration, coil style, and model-year fitment before installation. Match each wire to the correct cylinder and route the leads away from exhaust heat and moving components. For best results, inspect spark plugs, coil packs, and boots at the same time so the new wire set is installed on a clean ignition system.
Quality Assurance
Walker High Performance 924-6003 is built as a replacement ignition wire set for the listed applications and is backed by Walker product support. Confirm fitment against the vehicle year, make, model, and coil style shown in the application data before purchase.
Walker 924-6003 Spark Plug Wire Set
Walker High Performance Spark Plug Wire Set 924-6003
Walker High Performance 924-6003 is a spark plug wire set for GM V8 applications that need reliable ignition transfer and a direct-fit replacement path. It is built with 8.8mm high-performance silicone construction and 135-degree boots for tighter routing around heat and engine components.
Key Features
- 8.8mm high-performance silicone wire construction
- 135-degree boot design for improved clearance in tight engine bays
- Direct replacement for a wide range of Cadillac, Chevrolet, GMC, Buick, Pontiac, Saab, and Hummer applications
- Compatible with round-coil and specific stamped-coil configurations noted in fitment
- Walker High Performance part number 924-6003 for catalog lookup and ordering
Detailed Description
This ignition wire set is listed for a broad range of GM trucks, SUVs, performance cars, and vans, including Chevrolet Silverado 1500, Tahoe, Corvette, Camaro, and GMC Sierra applications. It also covers select Cadillac Escalade, CTS, and CT5 models, along with other supported vehicles from 1999 through 2022. The Walker High Performance line focuses on ignition components for demanding street and truck use, and this part number 924-6003 is cataloged for multiple engine and coil-pack layouts shown in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Misfires caused by worn or heat-damaged plug wires
- Hard starting related to weak spark delivery
- Intermittent ignition performance under load
- Routing issues in engines that require 135-degree boot clearance
- Replacement needs for aging GM ignition wire sets
Installation Notes and Tips
Verify engine configuration, coil style, and model-year fitment before installation. Match each wire to the correct cylinder and route the leads away from exhaust heat and moving components. For best results, inspect spark plugs, coil packs, and boots at the same time so the new wire set is installed on a clean ignition system.
Quality Assurance
Walker High Performance 924-6003 is built as a replacement ignition wire set for the listed applications and is backed by Walker product support. Confirm fitment against the vehicle year, make, model, and coil style shown in the application data before purchase.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Walker High Performance Spark Plug Wire Set 924-6003
Walker High Performance 924-6003 is a spark plug wire set for GM V8 applications that need reliable ignition transfer and a direct-fit replacement path. It is built with 8.8mm high-performance silicone construction and 135-degree boots for tighter routing around heat and engine components.
Key Features
- 8.8mm high-performance silicone wire construction
- 135-degree boot design for improved clearance in tight engine bays
- Direct replacement for a wide range of Cadillac, Chevrolet, GMC, Buick, Pontiac, Saab, and Hummer applications
- Compatible with round-coil and specific stamped-coil configurations noted in fitment
- Walker High Performance part number 924-6003 for catalog lookup and ordering
Detailed Description
This ignition wire set is listed for a broad range of GM trucks, SUVs, performance cars, and vans, including Chevrolet Silverado 1500, Tahoe, Corvette, Camaro, and GMC Sierra applications. It also covers select Cadillac Escalade, CTS, and CT5 models, along with other supported vehicles from 1999 through 2022. The Walker High Performance line focuses on ignition components for demanding street and truck use, and this part number 924-6003 is cataloged for multiple engine and coil-pack layouts shown in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Misfires caused by worn or heat-damaged plug wires
- Hard starting related to weak spark delivery
- Intermittent ignition performance under load
- Routing issues in engines that require 135-degree boot clearance
- Replacement needs for aging GM ignition wire sets
Installation Notes and Tips
Verify engine configuration, coil style, and model-year fitment before installation. Match each wire to the correct cylinder and route the leads away from exhaust heat and moving components. For best results, inspect spark plugs, coil packs, and boots at the same time so the new wire set is installed on a clean ignition system.
Quality Assurance
Walker High Performance 924-6003 is built as a replacement ignition wire set for the listed applications and is backed by Walker product support. Confirm fitment against the vehicle year, make, model, and coil style shown in the application data before purchase.
