Autotecnica CY0516865 Fuel Pump Module Assembly
Fuel Pump Module Assembly for Jeep TJ and Wrangler
Autotecnica CY0516865 is an electric fuel pump module assembly built for direct replacement service on select Jeep TJ and Wrangler models. It combines the pump, sender-related electrical connections, and sealing components needed to restore consistent fuel delivery and tank-level signal performance.
Compatible With 2005-2006 Jeep TJ and 2005-2006 Jeep Wrangler, this Autotecnica fuel pump module assembly is a practical OE-style replacement for drivability and fuel system repair work.
Key Features
- Part number CY0516865 fuel pump module assembly
- Electric pump design with negative ground electrical system
- Direct inlet and outlet fittings for straightforward fuel line connection
- Rectangular female connector with blade-style male terminals
- Gasket or seal included for tank sealing service
- Housing constructed from POM
- Flow rate of 38.3 gph at 40 psi
- Resistance range: 21 ohms empty and 220.1 ohms full
Detailed Description
Autotecnica CY0516865 is engineered for fuel delivery replacement in 2005-2006 Jeep TJ and 2005-2006 Jeep Wrangler applications. The module uses an electric pump with a 7.33 amp draw, direct inlet and outlet fittings, and a rectangular female connector to match the vehicle’s electrical and fuel system layout. The included gasket or seal supports tank resealing during service, while the sender resistance values help maintain accurate fuel level reporting.
Autotecnica manufactures aftermarket components for Asian and North American vehicles and builds to ISO/TS 16949 QMS specifications. This part cross-references Airtex Fuel Pumps E7200M and Carter P76521M for the same application. The CY0516865 part number is also a useful reference when sourcing a replacement fuel pump module assembly for Jeep TJ and Wrangler fuel system repair.
Common Repair Uses
- Restores fuel pressure when the original pump is weak or failing
- Addresses hard-start or no-start conditions related to fuel delivery
- Corrects erratic fuel gauge readings caused by sender wear
- Replaces a leaking tank seal at the pump module opening
- Supports repair of fuel starvation, hesitation, or stalling complaints
Installation Notes and Tips
Verify connector shape, terminal style, inlet and outlet dimensions, and sender resistance before installation. Clean the tank opening and inspect the fuel lines, electrical connector, and sealing surface before fitting the new module. Because this assembly is direct-fit for the listed Jeep TJ and Wrangler applications, confirm year and model match before service.
Quality Assurance
Autotecnica builds replacement parts under ISO/TS 16949 QMS specifications and backs this fuel pump module assembly with a two-year, unlimited mileage warranty.
Original: $123.52
-65%$123.52
$43.23Autotecnica CY0516865 Fuel Pump Module Assembly
Fuel Pump Module Assembly for Jeep TJ and Wrangler
Autotecnica CY0516865 is an electric fuel pump module assembly built for direct replacement service on select Jeep TJ and Wrangler models. It combines the pump, sender-related electrical connections, and sealing components needed to restore consistent fuel delivery and tank-level signal performance.
Compatible With 2005-2006 Jeep TJ and 2005-2006 Jeep Wrangler, this Autotecnica fuel pump module assembly is a practical OE-style replacement for drivability and fuel system repair work.
Key Features
- Part number CY0516865 fuel pump module assembly
- Electric pump design with negative ground electrical system
- Direct inlet and outlet fittings for straightforward fuel line connection
- Rectangular female connector with blade-style male terminals
- Gasket or seal included for tank sealing service
- Housing constructed from POM
- Flow rate of 38.3 gph at 40 psi
- Resistance range: 21 ohms empty and 220.1 ohms full
Detailed Description
Autotecnica CY0516865 is engineered for fuel delivery replacement in 2005-2006 Jeep TJ and 2005-2006 Jeep Wrangler applications. The module uses an electric pump with a 7.33 amp draw, direct inlet and outlet fittings, and a rectangular female connector to match the vehicle’s electrical and fuel system layout. The included gasket or seal supports tank resealing during service, while the sender resistance values help maintain accurate fuel level reporting.
Autotecnica manufactures aftermarket components for Asian and North American vehicles and builds to ISO/TS 16949 QMS specifications. This part cross-references Airtex Fuel Pumps E7200M and Carter P76521M for the same application. The CY0516865 part number is also a useful reference when sourcing a replacement fuel pump module assembly for Jeep TJ and Wrangler fuel system repair.
Common Repair Uses
- Restores fuel pressure when the original pump is weak or failing
- Addresses hard-start or no-start conditions related to fuel delivery
- Corrects erratic fuel gauge readings caused by sender wear
- Replaces a leaking tank seal at the pump module opening
- Supports repair of fuel starvation, hesitation, or stalling complaints
Installation Notes and Tips
Verify connector shape, terminal style, inlet and outlet dimensions, and sender resistance before installation. Clean the tank opening and inspect the fuel lines, electrical connector, and sealing surface before fitting the new module. Because this assembly is direct-fit for the listed Jeep TJ and Wrangler applications, confirm year and model match before service.
Quality Assurance
Autotecnica builds replacement parts under ISO/TS 16949 QMS specifications and backs this fuel pump module assembly with a two-year, unlimited mileage warranty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fuel Pump Module Assembly for Jeep TJ and Wrangler
Autotecnica CY0516865 is an electric fuel pump module assembly built for direct replacement service on select Jeep TJ and Wrangler models. It combines the pump, sender-related electrical connections, and sealing components needed to restore consistent fuel delivery and tank-level signal performance.
Compatible With 2005-2006 Jeep TJ and 2005-2006 Jeep Wrangler, this Autotecnica fuel pump module assembly is a practical OE-style replacement for drivability and fuel system repair work.
Key Features
- Part number CY0516865 fuel pump module assembly
- Electric pump design with negative ground electrical system
- Direct inlet and outlet fittings for straightforward fuel line connection
- Rectangular female connector with blade-style male terminals
- Gasket or seal included for tank sealing service
- Housing constructed from POM
- Flow rate of 38.3 gph at 40 psi
- Resistance range: 21 ohms empty and 220.1 ohms full
Detailed Description
Autotecnica CY0516865 is engineered for fuel delivery replacement in 2005-2006 Jeep TJ and 2005-2006 Jeep Wrangler applications. The module uses an electric pump with a 7.33 amp draw, direct inlet and outlet fittings, and a rectangular female connector to match the vehicle’s electrical and fuel system layout. The included gasket or seal supports tank resealing during service, while the sender resistance values help maintain accurate fuel level reporting.
Autotecnica manufactures aftermarket components for Asian and North American vehicles and builds to ISO/TS 16949 QMS specifications. This part cross-references Airtex Fuel Pumps E7200M and Carter P76521M for the same application. The CY0516865 part number is also a useful reference when sourcing a replacement fuel pump module assembly for Jeep TJ and Wrangler fuel system repair.
Common Repair Uses
- Restores fuel pressure when the original pump is weak or failing
- Addresses hard-start or no-start conditions related to fuel delivery
- Corrects erratic fuel gauge readings caused by sender wear
- Replaces a leaking tank seal at the pump module opening
- Supports repair of fuel starvation, hesitation, or stalling complaints
Installation Notes and Tips
Verify connector shape, terminal style, inlet and outlet dimensions, and sender resistance before installation. Clean the tank opening and inspect the fuel lines, electrical connector, and sealing surface before fitting the new module. Because this assembly is direct-fit for the listed Jeep TJ and Wrangler applications, confirm year and model match before service.
Quality Assurance
Autotecnica builds replacement parts under ISO/TS 16949 QMS specifications and backs this fuel pump module assembly with a two-year, unlimited mileage warranty.
