Centric 150.62375 Brake Hydraulic Hose - Rear
Centric Rear Brake Hydraulic Hose
The Centric Premium Brake Hydraulic Hose, part number 150.62375, is a DOT-approved rear brake hose built for specific Pontiac and Oldsmobile applications. It uses an EPDM rubber outer sleeve with metal female ends and bubble flares for a direct hydraulic connection.
Centric Premium Brake Hydraulic Hoses are part of Centric Parts’ brake hydraulic line, which covers master cylinders, wheel cylinders, brake hoses, repair kits, and remanufactured power boosters. This hose is a focused replacement for rear brake service on the Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette.
Key Features
- DOT approved for brake system use
- Black EPDM rubber outer sleeve
- Metal female fittings on both ends
- Bubble flare design at both ends
- End thread size: M10-1.00
- Overall length: 14.409 in. / 366.00 mm
- Rear position application
- Centric part number 150.62375
Detailed Description
Built for rear brake hydraulic service, this hose is specified with no mounting hardware, grommets, brackets, gasket, seal, or shield included. The hose uses an EPDM rubber outer sleeve for brake-line routing and flexibility, while the metal female fittings and bubble flares support the hydraulic connection points used in the listed applications. For buyers searching for a rear brake hose for 2005 Pontiac Montana, 2001-2004 Oldsmobile Silhouette, or 1997-1999 Pontiac Trans Sport, this Centric hose provides the correct fitment profile.
This part cross-references Dorman - First Stop H380913 and Gates 78536 for the same application. The Centric Premium Brake Hydraulic Hoses line is built to cover common brake hydraulic replacement needs with application-specific hose configurations.
What It Helps Fix
- Brake fluid leaks at the rear hose connection
- Soft or inconsistent brake pedal feel caused by hose deterioration
- Cracked, dry-rotted, or aging rubber brake hose material
- Corrosion or wear at the hose end fittings
- Brake service issues on rear hydraulic lines for Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette
Installation Notes
Verify rear-position routing, thread size, and flare type before installation. This hose uses M10-1.00 female ends with bubble flares, so the mating hard lines and fittings must match the vehicle’s original brake plumbing. Confirm the application against the vehicle year and model before service on 2005 Pontiac Montana, 2001-2004 Oldsmobile Silhouette, or 1997-1999 Pontiac Trans Sport.
Quality Assurance
Centric includes this hose in its brake hydraulic program, which is organized around replacement components for brake system repair and service. The hose is DOT approved and built to the listed specifications for the confirmed rear applications.
Centric 150.62375 Brake Hydraulic Hose - Rear
Centric Rear Brake Hydraulic Hose
The Centric Premium Brake Hydraulic Hose, part number 150.62375, is a DOT-approved rear brake hose built for specific Pontiac and Oldsmobile applications. It uses an EPDM rubber outer sleeve with metal female ends and bubble flares for a direct hydraulic connection.
Centric Premium Brake Hydraulic Hoses are part of Centric Parts’ brake hydraulic line, which covers master cylinders, wheel cylinders, brake hoses, repair kits, and remanufactured power boosters. This hose is a focused replacement for rear brake service on the Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette.
Key Features
- DOT approved for brake system use
- Black EPDM rubber outer sleeve
- Metal female fittings on both ends
- Bubble flare design at both ends
- End thread size: M10-1.00
- Overall length: 14.409 in. / 366.00 mm
- Rear position application
- Centric part number 150.62375
Detailed Description
Built for rear brake hydraulic service, this hose is specified with no mounting hardware, grommets, brackets, gasket, seal, or shield included. The hose uses an EPDM rubber outer sleeve for brake-line routing and flexibility, while the metal female fittings and bubble flares support the hydraulic connection points used in the listed applications. For buyers searching for a rear brake hose for 2005 Pontiac Montana, 2001-2004 Oldsmobile Silhouette, or 1997-1999 Pontiac Trans Sport, this Centric hose provides the correct fitment profile.
This part cross-references Dorman - First Stop H380913 and Gates 78536 for the same application. The Centric Premium Brake Hydraulic Hoses line is built to cover common brake hydraulic replacement needs with application-specific hose configurations.
What It Helps Fix
- Brake fluid leaks at the rear hose connection
- Soft or inconsistent brake pedal feel caused by hose deterioration
- Cracked, dry-rotted, or aging rubber brake hose material
- Corrosion or wear at the hose end fittings
- Brake service issues on rear hydraulic lines for Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette
Installation Notes
Verify rear-position routing, thread size, and flare type before installation. This hose uses M10-1.00 female ends with bubble flares, so the mating hard lines and fittings must match the vehicle’s original brake plumbing. Confirm the application against the vehicle year and model before service on 2005 Pontiac Montana, 2001-2004 Oldsmobile Silhouette, or 1997-1999 Pontiac Trans Sport.
Quality Assurance
Centric includes this hose in its brake hydraulic program, which is organized around replacement components for brake system repair and service. The hose is DOT approved and built to the listed specifications for the confirmed rear applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Centric Rear Brake Hydraulic Hose
The Centric Premium Brake Hydraulic Hose, part number 150.62375, is a DOT-approved rear brake hose built for specific Pontiac and Oldsmobile applications. It uses an EPDM rubber outer sleeve with metal female ends and bubble flares for a direct hydraulic connection.
Centric Premium Brake Hydraulic Hoses are part of Centric Parts’ brake hydraulic line, which covers master cylinders, wheel cylinders, brake hoses, repair kits, and remanufactured power boosters. This hose is a focused replacement for rear brake service on the Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette.
Key Features
- DOT approved for brake system use
- Black EPDM rubber outer sleeve
- Metal female fittings on both ends
- Bubble flare design at both ends
- End thread size: M10-1.00
- Overall length: 14.409 in. / 366.00 mm
- Rear position application
- Centric part number 150.62375
Detailed Description
Built for rear brake hydraulic service, this hose is specified with no mounting hardware, grommets, brackets, gasket, seal, or shield included. The hose uses an EPDM rubber outer sleeve for brake-line routing and flexibility, while the metal female fittings and bubble flares support the hydraulic connection points used in the listed applications. For buyers searching for a rear brake hose for 2005 Pontiac Montana, 2001-2004 Oldsmobile Silhouette, or 1997-1999 Pontiac Trans Sport, this Centric hose provides the correct fitment profile.
This part cross-references Dorman - First Stop H380913 and Gates 78536 for the same application. The Centric Premium Brake Hydraulic Hoses line is built to cover common brake hydraulic replacement needs with application-specific hose configurations.
What It Helps Fix
- Brake fluid leaks at the rear hose connection
- Soft or inconsistent brake pedal feel caused by hose deterioration
- Cracked, dry-rotted, or aging rubber brake hose material
- Corrosion or wear at the hose end fittings
- Brake service issues on rear hydraulic lines for Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette
Installation Notes
Verify rear-position routing, thread size, and flare type before installation. This hose uses M10-1.00 female ends with bubble flares, so the mating hard lines and fittings must match the vehicle’s original brake plumbing. Confirm the application against the vehicle year and model before service on 2005 Pontiac Montana, 2001-2004 Oldsmobile Silhouette, or 1997-1999 Pontiac Trans Sport.
Quality Assurance
Centric includes this hose in its brake hydraulic program, which is organized around replacement components for brake system repair and service. The hose is DOT approved and built to the listed specifications for the confirmed rear applications.
