Continental 15366 Accessory Drive Belt
Continental 15366 Automotive V-Belt
The Continental 15366 accessory drive belt is built for older belt-driven systems that rely on consistent grip, stable tension, and quiet operation. With EPDM construction and fiber reinforcement, it is a practical replacement for power steering, fan, alternator, air conditioning, and air pump applications across a wide range of classic vehicles.
Key Features
- EPDM rubber compound for high heat and abrasion resistance
- High-strength fiber reinforcement helps control belt elongation
- 0.47 in. top width for proper pulley contact
- 36.60 in. belt length for confirmed OE-style applications
- Precision top width and sidewalls meet or exceed SAE J636 standards
- Built for steady traction and quiet operation in accessory drive systems
Product Details
Continental Automotive V-Belt part number 15366 is engineered for accessory drive systems where belt stability matters. The belt’s EPDM compounds help it handle heat and wear, while the reinforced construction supports consistent tension over time. Its precise dimensions are important for vehicles such as the Honda Accord, Chevrolet Corvette, and Ford Thunderbird, where correct belt fit affects accessory performance and drivability. This part cross-references Gates 7360 for the same application.
As part of Continental’s Automotive V-Belt line, this belt is made for dependable service in legacy V-belt systems. The line focuses on accurate sizing, durable materials, and smooth running characteristics for vehicles that still depend on belt-driven accessories.
Common Problems This Belt Can Help Address
- Squealing or chirping from a worn accessory drive belt
- Loss of belt grip on power steering, fan, or alternator drives
- Cracking, glazing, or visible wear on an aging V-belt
- Belt stretch that can affect accessory performance
- Noise from an out-of-spec belt on classic vehicle applications
Installation Notes and Tips
Verify belt length and top width before installation, especially on older vehicles with multiple engine or accessory configurations. Confirm pulley alignment and inspect tensioner or adjustment hardware where applicable. For fitment examples, this belt fits 1986-1989 Honda Accord, Power Steering; fits 1976-1982 Chevrolet Corvette, Power Steering; and fits 1987 Ford Thunderbird, Air Conditioning and Power Steering. Additional confirmed applications include 1986-1988 Mazda RX-7, Fan and Air Pump, and 1985-1987 BMW 735i, Power Steering.
Quality Assurance
Continental specifies EPDM material, fiber reinforcement, and precision dimensions to support long-lasting performance in accessory drive belt systems. The belt is manufactured to meet or exceed SAE J636 standards for width and sidewall accuracy.
Continental 15366 Accessory Drive Belt
Continental 15366 Automotive V-Belt
The Continental 15366 accessory drive belt is built for older belt-driven systems that rely on consistent grip, stable tension, and quiet operation. With EPDM construction and fiber reinforcement, it is a practical replacement for power steering, fan, alternator, air conditioning, and air pump applications across a wide range of classic vehicles.
Key Features
- EPDM rubber compound for high heat and abrasion resistance
- High-strength fiber reinforcement helps control belt elongation
- 0.47 in. top width for proper pulley contact
- 36.60 in. belt length for confirmed OE-style applications
- Precision top width and sidewalls meet or exceed SAE J636 standards
- Built for steady traction and quiet operation in accessory drive systems
Product Details
Continental Automotive V-Belt part number 15366 is engineered for accessory drive systems where belt stability matters. The belt’s EPDM compounds help it handle heat and wear, while the reinforced construction supports consistent tension over time. Its precise dimensions are important for vehicles such as the Honda Accord, Chevrolet Corvette, and Ford Thunderbird, where correct belt fit affects accessory performance and drivability. This part cross-references Gates 7360 for the same application.
As part of Continental’s Automotive V-Belt line, this belt is made for dependable service in legacy V-belt systems. The line focuses on accurate sizing, durable materials, and smooth running characteristics for vehicles that still depend on belt-driven accessories.
Common Problems This Belt Can Help Address
- Squealing or chirping from a worn accessory drive belt
- Loss of belt grip on power steering, fan, or alternator drives
- Cracking, glazing, or visible wear on an aging V-belt
- Belt stretch that can affect accessory performance
- Noise from an out-of-spec belt on classic vehicle applications
Installation Notes and Tips
Verify belt length and top width before installation, especially on older vehicles with multiple engine or accessory configurations. Confirm pulley alignment and inspect tensioner or adjustment hardware where applicable. For fitment examples, this belt fits 1986-1989 Honda Accord, Power Steering; fits 1976-1982 Chevrolet Corvette, Power Steering; and fits 1987 Ford Thunderbird, Air Conditioning and Power Steering. Additional confirmed applications include 1986-1988 Mazda RX-7, Fan and Air Pump, and 1985-1987 BMW 735i, Power Steering.
Quality Assurance
Continental specifies EPDM material, fiber reinforcement, and precision dimensions to support long-lasting performance in accessory drive belt systems. The belt is manufactured to meet or exceed SAE J636 standards for width and sidewall accuracy.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Continental 15366 Automotive V-Belt
The Continental 15366 accessory drive belt is built for older belt-driven systems that rely on consistent grip, stable tension, and quiet operation. With EPDM construction and fiber reinforcement, it is a practical replacement for power steering, fan, alternator, air conditioning, and air pump applications across a wide range of classic vehicles.
Key Features
- EPDM rubber compound for high heat and abrasion resistance
- High-strength fiber reinforcement helps control belt elongation
- 0.47 in. top width for proper pulley contact
- 36.60 in. belt length for confirmed OE-style applications
- Precision top width and sidewalls meet or exceed SAE J636 standards
- Built for steady traction and quiet operation in accessory drive systems
Product Details
Continental Automotive V-Belt part number 15366 is engineered for accessory drive systems where belt stability matters. The belt’s EPDM compounds help it handle heat and wear, while the reinforced construction supports consistent tension over time. Its precise dimensions are important for vehicles such as the Honda Accord, Chevrolet Corvette, and Ford Thunderbird, where correct belt fit affects accessory performance and drivability. This part cross-references Gates 7360 for the same application.
As part of Continental’s Automotive V-Belt line, this belt is made for dependable service in legacy V-belt systems. The line focuses on accurate sizing, durable materials, and smooth running characteristics for vehicles that still depend on belt-driven accessories.
Common Problems This Belt Can Help Address
- Squealing or chirping from a worn accessory drive belt
- Loss of belt grip on power steering, fan, or alternator drives
- Cracking, glazing, or visible wear on an aging V-belt
- Belt stretch that can affect accessory performance
- Noise from an out-of-spec belt on classic vehicle applications
Installation Notes and Tips
Verify belt length and top width before installation, especially on older vehicles with multiple engine or accessory configurations. Confirm pulley alignment and inspect tensioner or adjustment hardware where applicable. For fitment examples, this belt fits 1986-1989 Honda Accord, Power Steering; fits 1976-1982 Chevrolet Corvette, Power Steering; and fits 1987 Ford Thunderbird, Air Conditioning and Power Steering. Additional confirmed applications include 1986-1988 Mazda RX-7, Fan and Air Pump, and 1985-1987 BMW 735i, Power Steering.
Quality Assurance
Continental specifies EPDM material, fiber reinforcement, and precision dimensions to support long-lasting performance in accessory drive belt systems. The belt is manufactured to meet or exceed SAE J636 standards for width and sidewall accuracy.
