Gates 7318 Accessory Drive Belt - Air Pump or Fan To Air Pump
Gates 7318 High Capacity V-Belt Overview
The Gates 7318 High Capacity V-Belt is a replacement accessory drive belt for demanding engine drive systems. Built with EPDM belt material and polyester cord reinforcement, it is made for stable operation as engine temperatures rise and belt loads increase.
This Gates High Capacity V-Belt (Standard) uses a variable notched design to tighten on the drive as it heats up, helping reduce slippage and belt noise while maintaining consistent performance. It is a direct-fit option for select Ford, Lincoln, and Mercury applications, including Ford Ranger, Bronco, F-Series trucks, Thunderbird, and related air pump and fan-to-air-pump positions.
Key Features
- Part number: 7318
- Gates High Capacity V-Belt (Standard) construction
- EPDM belt material for durability in engine bay heat
- Polyester cord material for strength and stability
- HC25 section with 38-degree angle
- Single-strand, standard construction
- Effective length: 32 in. / 813 mm
- Outside circumference: 32.28 in. / 820 mm
- Top width: 0.265 in. / 6 mm
Product Details
Gates 7318 is built for accessory drive systems that need a dependable V-belt with controlled tension behavior under heat. The notched profile is engineered to tighten as operating temperature increases, which helps maintain grip on the pulley system and supports quieter operation. For buyers searching for a Ford Ranger accessory drive belt, Ford F-150 air pump belt, or a replacement V-belt for classic Ford and Mercury engine drives, this part number provides a focused fitment match.
This part cross-references Dayco 09320 for the same application.
What This Belt Helps Address
- Belt slippage in heated engine compartments
- Squealing or noise from worn accessory drive belts
- Loss of drive to air pump or fan-to-air-pump accessories
- Cracking, glazing, or wear on an aging V-belt
- Inconsistent accessory drive performance on older Ford, Lincoln, and Mercury vehicles
Installation Notes and Fitment
Compatible With 1975-1987 Ford Ranger, Air Pump and Fan To Air Pump positions; 1975-1979 Ford Bronco, Air Pump; 1975-1979 Ford F-100, Air Pump; 1975-1979 Ford F-150, Air Pump; 1975-1979 Ford F-250, Air Pump; 1975-1979 Ford F-350, Air Pump; 1975-1978 Ford LTD, Air Pump; 1977-1979 Ford Thunderbird, Air Pump; 1975-1979 Lincoln Continental, Air Pump; 1977-1978 Lincoln Versailles, Air Pump; 1975-1979 Mercury Cougar, Air Pump; 1975-1978 Mercury Grand Marquis, Air Pump; 1975-1978 Mercury Marquis, Air Pump; 1975-1979 Mercury Monarch, Air Pump; 1975-1976 Mercury Montego, Air Pump.
Verify pulley diameter, belt routing, and the listed position before installation. Match the belt length and section to the existing drive layout, especially on vehicles with air pump or modified-engine configurations. For 1983-1986 Ford Ranger applications, confirm the HVAC heater hose with A/C and serpentine-belt notes shown in the fitment data.
Quality Assurance
Gates manufactures this belt as part of its High Capacity V-Belt line, using EPDM construction and polyester reinforcement for long service life in demanding engine drive applications. The design is intended to maintain tension as temperatures change, supporting consistent accessory drive operation on compatible Ford, Lincoln, and Mercury vehicles.
Gates 7318 Accessory Drive Belt - Air Pump or Fan To Air Pump
Gates 7318 High Capacity V-Belt Overview
The Gates 7318 High Capacity V-Belt is a replacement accessory drive belt for demanding engine drive systems. Built with EPDM belt material and polyester cord reinforcement, it is made for stable operation as engine temperatures rise and belt loads increase.
This Gates High Capacity V-Belt (Standard) uses a variable notched design to tighten on the drive as it heats up, helping reduce slippage and belt noise while maintaining consistent performance. It is a direct-fit option for select Ford, Lincoln, and Mercury applications, including Ford Ranger, Bronco, F-Series trucks, Thunderbird, and related air pump and fan-to-air-pump positions.
Key Features
- Part number: 7318
- Gates High Capacity V-Belt (Standard) construction
- EPDM belt material for durability in engine bay heat
- Polyester cord material for strength and stability
- HC25 section with 38-degree angle
- Single-strand, standard construction
- Effective length: 32 in. / 813 mm
- Outside circumference: 32.28 in. / 820 mm
- Top width: 0.265 in. / 6 mm
Product Details
Gates 7318 is built for accessory drive systems that need a dependable V-belt with controlled tension behavior under heat. The notched profile is engineered to tighten as operating temperature increases, which helps maintain grip on the pulley system and supports quieter operation. For buyers searching for a Ford Ranger accessory drive belt, Ford F-150 air pump belt, or a replacement V-belt for classic Ford and Mercury engine drives, this part number provides a focused fitment match.
This part cross-references Dayco 09320 for the same application.
What This Belt Helps Address
- Belt slippage in heated engine compartments
- Squealing or noise from worn accessory drive belts
- Loss of drive to air pump or fan-to-air-pump accessories
- Cracking, glazing, or wear on an aging V-belt
- Inconsistent accessory drive performance on older Ford, Lincoln, and Mercury vehicles
Installation Notes and Fitment
Compatible With 1975-1987 Ford Ranger, Air Pump and Fan To Air Pump positions; 1975-1979 Ford Bronco, Air Pump; 1975-1979 Ford F-100, Air Pump; 1975-1979 Ford F-150, Air Pump; 1975-1979 Ford F-250, Air Pump; 1975-1979 Ford F-350, Air Pump; 1975-1978 Ford LTD, Air Pump; 1977-1979 Ford Thunderbird, Air Pump; 1975-1979 Lincoln Continental, Air Pump; 1977-1978 Lincoln Versailles, Air Pump; 1975-1979 Mercury Cougar, Air Pump; 1975-1978 Mercury Grand Marquis, Air Pump; 1975-1978 Mercury Marquis, Air Pump; 1975-1979 Mercury Monarch, Air Pump; 1975-1976 Mercury Montego, Air Pump.
Verify pulley diameter, belt routing, and the listed position before installation. Match the belt length and section to the existing drive layout, especially on vehicles with air pump or modified-engine configurations. For 1983-1986 Ford Ranger applications, confirm the HVAC heater hose with A/C and serpentine-belt notes shown in the fitment data.
Quality Assurance
Gates manufactures this belt as part of its High Capacity V-Belt line, using EPDM construction and polyester reinforcement for long service life in demanding engine drive applications. The design is intended to maintain tension as temperatures change, supporting consistent accessory drive operation on compatible Ford, Lincoln, and Mercury vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Gates 7318 High Capacity V-Belt Overview
The Gates 7318 High Capacity V-Belt is a replacement accessory drive belt for demanding engine drive systems. Built with EPDM belt material and polyester cord reinforcement, it is made for stable operation as engine temperatures rise and belt loads increase.
This Gates High Capacity V-Belt (Standard) uses a variable notched design to tighten on the drive as it heats up, helping reduce slippage and belt noise while maintaining consistent performance. It is a direct-fit option for select Ford, Lincoln, and Mercury applications, including Ford Ranger, Bronco, F-Series trucks, Thunderbird, and related air pump and fan-to-air-pump positions.
Key Features
- Part number: 7318
- Gates High Capacity V-Belt (Standard) construction
- EPDM belt material for durability in engine bay heat
- Polyester cord material for strength and stability
- HC25 section with 38-degree angle
- Single-strand, standard construction
- Effective length: 32 in. / 813 mm
- Outside circumference: 32.28 in. / 820 mm
- Top width: 0.265 in. / 6 mm
Product Details
Gates 7318 is built for accessory drive systems that need a dependable V-belt with controlled tension behavior under heat. The notched profile is engineered to tighten as operating temperature increases, which helps maintain grip on the pulley system and supports quieter operation. For buyers searching for a Ford Ranger accessory drive belt, Ford F-150 air pump belt, or a replacement V-belt for classic Ford and Mercury engine drives, this part number provides a focused fitment match.
This part cross-references Dayco 09320 for the same application.
What This Belt Helps Address
- Belt slippage in heated engine compartments
- Squealing or noise from worn accessory drive belts
- Loss of drive to air pump or fan-to-air-pump accessories
- Cracking, glazing, or wear on an aging V-belt
- Inconsistent accessory drive performance on older Ford, Lincoln, and Mercury vehicles
Installation Notes and Fitment
Compatible With 1975-1987 Ford Ranger, Air Pump and Fan To Air Pump positions; 1975-1979 Ford Bronco, Air Pump; 1975-1979 Ford F-100, Air Pump; 1975-1979 Ford F-150, Air Pump; 1975-1979 Ford F-250, Air Pump; 1975-1979 Ford F-350, Air Pump; 1975-1978 Ford LTD, Air Pump; 1977-1979 Ford Thunderbird, Air Pump; 1975-1979 Lincoln Continental, Air Pump; 1977-1978 Lincoln Versailles, Air Pump; 1975-1979 Mercury Cougar, Air Pump; 1975-1978 Mercury Grand Marquis, Air Pump; 1975-1978 Mercury Marquis, Air Pump; 1975-1979 Mercury Monarch, Air Pump; 1975-1976 Mercury Montego, Air Pump.
Verify pulley diameter, belt routing, and the listed position before installation. Match the belt length and section to the existing drive layout, especially on vehicles with air pump or modified-engine configurations. For 1983-1986 Ford Ranger applications, confirm the HVAC heater hose with A/C and serpentine-belt notes shown in the fitment data.
Quality Assurance
Gates manufactures this belt as part of its High Capacity V-Belt line, using EPDM construction and polyester reinforcement for long service life in demanding engine drive applications. The design is intended to maintain tension as temperatures change, supporting consistent accessory drive operation on compatible Ford, Lincoln, and Mercury vehicles.
