Dorman 318-080 Engine Control Module (ECM)
Engine Control Module for 2011 Dodge Durango and Jeep Grand Cherokee
This Dorman engine control module (ECM), part number 318-080, is a remanufactured replacement for select 2011 Dodge Durango and 2011 Jeep Grand Cherokee applications. It processes sensor inputs to manage ignition timing and fuel delivery, helping restore proper engine operation when the original module has failed.
Key Features
- Remanufactured ECM tested to meet original equipment performance
- Direct-fit electronic control module for engine management service
- Black connector color with 4 rectangular female connectors
- 152 terminals and 3 mounting holes
- Flashable module; flash programming required: No
- Wire harness included: No
- Mounting hardware included: No
- Part number 318-080 for streamlined ordering and lookup
Detailed Description
Dorman 318-080 is an engine control module built for vehicles that need a replacement ECM with OE-style electronic control. It receives data from engine sensors and uses that information to regulate ignition and fueling for consistent drivability and efficiency. This remanufactured unit is tested to meet original equipment performance standards and is listed for 2011 Dodge Durango and 2011 Jeep Grand Cherokee applications with VIN, mileage, and tire size required to order. The part number 318-080 also cross-references R5150588AC for the same application.
What It Helps Address
- Engine no-start or intermittent start conditions caused by ECM failure
- Check engine light concerns related to module communication or control faults
- Rough running, poor idle, or inconsistent fuel delivery commands
- Ignition timing issues tied to incorrect sensor processing
- Driveability problems after an original module has degraded
Installation Notes and Tips
Verify the VIN, mileage, and tire size before ordering, since this application requires vehicle-specific information. Confirm connector count, connector shape, terminal count, and mounting points against the original module before installation. Because this ECM is flashable, follow the vehicle’s programming and relearn procedures as required after replacement. For fitment, this part fits 2011 Dodge Durango, N/A, and fits 2011 Jeep Grand Cherokee, N/A.
Quality Assurance
Dorman remanufactures this ECM and tests it to meet original equipment performance expectations. That testing helps ensure the module is ready for engine management service on the listed 2011 Dodge Durango and Jeep Grand Cherokee applications.
Dorman 318-080 Engine Control Module (ECM)
Engine Control Module for 2011 Dodge Durango and Jeep Grand Cherokee
This Dorman engine control module (ECM), part number 318-080, is a remanufactured replacement for select 2011 Dodge Durango and 2011 Jeep Grand Cherokee applications. It processes sensor inputs to manage ignition timing and fuel delivery, helping restore proper engine operation when the original module has failed.
Key Features
- Remanufactured ECM tested to meet original equipment performance
- Direct-fit electronic control module for engine management service
- Black connector color with 4 rectangular female connectors
- 152 terminals and 3 mounting holes
- Flashable module; flash programming required: No
- Wire harness included: No
- Mounting hardware included: No
- Part number 318-080 for streamlined ordering and lookup
Detailed Description
Dorman 318-080 is an engine control module built for vehicles that need a replacement ECM with OE-style electronic control. It receives data from engine sensors and uses that information to regulate ignition and fueling for consistent drivability and efficiency. This remanufactured unit is tested to meet original equipment performance standards and is listed for 2011 Dodge Durango and 2011 Jeep Grand Cherokee applications with VIN, mileage, and tire size required to order. The part number 318-080 also cross-references R5150588AC for the same application.
What It Helps Address
- Engine no-start or intermittent start conditions caused by ECM failure
- Check engine light concerns related to module communication or control faults
- Rough running, poor idle, or inconsistent fuel delivery commands
- Ignition timing issues tied to incorrect sensor processing
- Driveability problems after an original module has degraded
Installation Notes and Tips
Verify the VIN, mileage, and tire size before ordering, since this application requires vehicle-specific information. Confirm connector count, connector shape, terminal count, and mounting points against the original module before installation. Because this ECM is flashable, follow the vehicle’s programming and relearn procedures as required after replacement. For fitment, this part fits 2011 Dodge Durango, N/A, and fits 2011 Jeep Grand Cherokee, N/A.
Quality Assurance
Dorman remanufactures this ECM and tests it to meet original equipment performance expectations. That testing helps ensure the module is ready for engine management service on the listed 2011 Dodge Durango and Jeep Grand Cherokee applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Control Module for 2011 Dodge Durango and Jeep Grand Cherokee
This Dorman engine control module (ECM), part number 318-080, is a remanufactured replacement for select 2011 Dodge Durango and 2011 Jeep Grand Cherokee applications. It processes sensor inputs to manage ignition timing and fuel delivery, helping restore proper engine operation when the original module has failed.
Key Features
- Remanufactured ECM tested to meet original equipment performance
- Direct-fit electronic control module for engine management service
- Black connector color with 4 rectangular female connectors
- 152 terminals and 3 mounting holes
- Flashable module; flash programming required: No
- Wire harness included: No
- Mounting hardware included: No
- Part number 318-080 for streamlined ordering and lookup
Detailed Description
Dorman 318-080 is an engine control module built for vehicles that need a replacement ECM with OE-style electronic control. It receives data from engine sensors and uses that information to regulate ignition and fueling for consistent drivability and efficiency. This remanufactured unit is tested to meet original equipment performance standards and is listed for 2011 Dodge Durango and 2011 Jeep Grand Cherokee applications with VIN, mileage, and tire size required to order. The part number 318-080 also cross-references R5150588AC for the same application.
What It Helps Address
- Engine no-start or intermittent start conditions caused by ECM failure
- Check engine light concerns related to module communication or control faults
- Rough running, poor idle, or inconsistent fuel delivery commands
- Ignition timing issues tied to incorrect sensor processing
- Driveability problems after an original module has degraded
Installation Notes and Tips
Verify the VIN, mileage, and tire size before ordering, since this application requires vehicle-specific information. Confirm connector count, connector shape, terminal count, and mounting points against the original module before installation. Because this ECM is flashable, follow the vehicle’s programming and relearn procedures as required after replacement. For fitment, this part fits 2011 Dodge Durango, N/A, and fits 2011 Jeep Grand Cherokee, N/A.
Quality Assurance
Dorman remanufactures this ECM and tests it to meet original equipment performance expectations. That testing helps ensure the module is ready for engine management service on the listed 2011 Dodge Durango and Jeep Grand Cherokee applications.
