Dorman 318-347 Engine Control Module (ECM)
Engine Control Module for 2010 Ram 2500
This Dorman engine control module restores electronic engine management for the 2010 Dodge Ram 2500. Part number 318-347 is a remanufactured ECM that processes sensor inputs to control ignition timing and fuel delivery for consistent engine operation and efficiency.
Compatible with 2010 Dodge Ram 2500 applications that require VIN, mileage, and tire size information to order, this ECM is built for direct replacement use in the engine control system. The unit features 4 black female connectors, 152 terminals, a rectangular connector shape, and a 3-hole mounting pattern.
Key Features
- Remanufactured engine control module tested to meet original equipment performance
- Part number 318-347 for 2010 Dodge Ram 2500 applications
- No flash programming required
- Flashable unit for service and calibration flexibility
- 4 connector design with black female connectors
- 152 terminal layout with rectangular connector shape
- Mounting hole quantity: 3
- Wire harness not included
Detailed Description
The Dorman 318-347 ECM is the electronic control center for engine operation, using sensor data to manage ignition and fueling. For Ram 2500 owners needing a replacement engine control module, this remanufactured unit provides a service-ready solution that matches original equipment performance targets. It is listed for 2010 Dodge Ram 2500 fitment and cross-references OE part numbers 5150501AA and 5187975AA for the same application.
With a black connector color, female connector gender, male terminal gender, and pin-style terminals, this module is configured for the factory electrical interface. The ECM measures 9 inches long, 1.5 inches wide, and 6 inches high, and it uses a 4-connector, 152-terminal layout to support the vehicle’s engine management system.
What This ECM Helps Resolve
- Engine no-start conditions caused by a failed control module
- Rough idle or unstable engine operation from ECM faults
- Fuel delivery and ignition control errors tied to module failure
- Diagnostic trouble codes related to engine management electronics
- Loss of proper sensor processing in the engine control system
Installation Notes and Tips
Before ordering, confirm the VIN, mileage, and tire size required for this 2010 Dodge Ram 2500 application. Verify connector count, connector shape, and terminal layout against the original module before installation. Because this ECM is flashable, follow the vehicle-specific programming and initialization steps required for the repair.
Quality Assurance
Dorman remanufactures this ECM and tests it to meet original equipment performance standards. Part number 318-347 is built for service replacement in the engine control module category and is intended to restore factory-style electronic engine management on the 2010 Ram 2500.
Dorman 318-347 Engine Control Module (ECM)
Engine Control Module for 2010 Ram 2500
This Dorman engine control module restores electronic engine management for the 2010 Dodge Ram 2500. Part number 318-347 is a remanufactured ECM that processes sensor inputs to control ignition timing and fuel delivery for consistent engine operation and efficiency.
Compatible with 2010 Dodge Ram 2500 applications that require VIN, mileage, and tire size information to order, this ECM is built for direct replacement use in the engine control system. The unit features 4 black female connectors, 152 terminals, a rectangular connector shape, and a 3-hole mounting pattern.
Key Features
- Remanufactured engine control module tested to meet original equipment performance
- Part number 318-347 for 2010 Dodge Ram 2500 applications
- No flash programming required
- Flashable unit for service and calibration flexibility
- 4 connector design with black female connectors
- 152 terminal layout with rectangular connector shape
- Mounting hole quantity: 3
- Wire harness not included
Detailed Description
The Dorman 318-347 ECM is the electronic control center for engine operation, using sensor data to manage ignition and fueling. For Ram 2500 owners needing a replacement engine control module, this remanufactured unit provides a service-ready solution that matches original equipment performance targets. It is listed for 2010 Dodge Ram 2500 fitment and cross-references OE part numbers 5150501AA and 5187975AA for the same application.
With a black connector color, female connector gender, male terminal gender, and pin-style terminals, this module is configured for the factory electrical interface. The ECM measures 9 inches long, 1.5 inches wide, and 6 inches high, and it uses a 4-connector, 152-terminal layout to support the vehicle’s engine management system.
What This ECM Helps Resolve
- Engine no-start conditions caused by a failed control module
- Rough idle or unstable engine operation from ECM faults
- Fuel delivery and ignition control errors tied to module failure
- Diagnostic trouble codes related to engine management electronics
- Loss of proper sensor processing in the engine control system
Installation Notes and Tips
Before ordering, confirm the VIN, mileage, and tire size required for this 2010 Dodge Ram 2500 application. Verify connector count, connector shape, and terminal layout against the original module before installation. Because this ECM is flashable, follow the vehicle-specific programming and initialization steps required for the repair.
Quality Assurance
Dorman remanufactures this ECM and tests it to meet original equipment performance standards. Part number 318-347 is built for service replacement in the engine control module category and is intended to restore factory-style electronic engine management on the 2010 Ram 2500.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Control Module for 2010 Ram 2500
This Dorman engine control module restores electronic engine management for the 2010 Dodge Ram 2500. Part number 318-347 is a remanufactured ECM that processes sensor inputs to control ignition timing and fuel delivery for consistent engine operation and efficiency.
Compatible with 2010 Dodge Ram 2500 applications that require VIN, mileage, and tire size information to order, this ECM is built for direct replacement use in the engine control system. The unit features 4 black female connectors, 152 terminals, a rectangular connector shape, and a 3-hole mounting pattern.
Key Features
- Remanufactured engine control module tested to meet original equipment performance
- Part number 318-347 for 2010 Dodge Ram 2500 applications
- No flash programming required
- Flashable unit for service and calibration flexibility
- 4 connector design with black female connectors
- 152 terminal layout with rectangular connector shape
- Mounting hole quantity: 3
- Wire harness not included
Detailed Description
The Dorman 318-347 ECM is the electronic control center for engine operation, using sensor data to manage ignition and fueling. For Ram 2500 owners needing a replacement engine control module, this remanufactured unit provides a service-ready solution that matches original equipment performance targets. It is listed for 2010 Dodge Ram 2500 fitment and cross-references OE part numbers 5150501AA and 5187975AA for the same application.
With a black connector color, female connector gender, male terminal gender, and pin-style terminals, this module is configured for the factory electrical interface. The ECM measures 9 inches long, 1.5 inches wide, and 6 inches high, and it uses a 4-connector, 152-terminal layout to support the vehicle’s engine management system.
What This ECM Helps Resolve
- Engine no-start conditions caused by a failed control module
- Rough idle or unstable engine operation from ECM faults
- Fuel delivery and ignition control errors tied to module failure
- Diagnostic trouble codes related to engine management electronics
- Loss of proper sensor processing in the engine control system
Installation Notes and Tips
Before ordering, confirm the VIN, mileage, and tire size required for this 2010 Dodge Ram 2500 application. Verify connector count, connector shape, and terminal layout against the original module before installation. Because this ECM is flashable, follow the vehicle-specific programming and initialization steps required for the repair.
Quality Assurance
Dorman remanufactures this ECM and tests it to meet original equipment performance standards. Part number 318-347 is built for service replacement in the engine control module category and is intended to restore factory-style electronic engine management on the 2010 Ram 2500.
