Dorman 521-095 Suspension Control Arm and Ball Joint Assembly - Front Left Lower
Dorman 521-095 Front Left Lower Control Arm
Dorman 521-095 is a direct replacement suspension control arm and ball joint assembly for specific front left lower applications. It is built for stable steering response, consistent ride quality, and predictable suspension movement on vehicles such as the Pontiac Firefly, Chevrolet Metro, Chevrolet Sprint, and Suzuki Swift.
Key Features
- Direct replacement for the original equipment control arm and ball joint assembly
- Pre-greased for immediate service
- Steel stamped control arm with black finish
- Ball joint is installed and uses a press-in mounting design
- Rubber bushings included for suspension isolation
- Mounting hardware included
- Regular grade, light suspension application
Detailed Description
This Dorman suspension control arm and ball joint assembly is engineered for front left lower use on select compact vehicles, including 1989-1991 Chevrolet Sprint, 1989-1991 Suzuki Swift, 1989-1991 Pontiac Firefly, and 1992 Chevrolet Metro, plus 1994 Pontiac Firefly. The stamped steel construction, installed ball joint, and included bushings provide a complete OE-style replacement for worn front suspension components. Part number 521-095 is also referenced in aftermarket interchange listings for applications that cross to Mevotech Original Grade GS5302 and Mevotech Supreme CMS5302.
As a replacement suspension control arm assembly, 521-095 helps restore proper wheel location and suspension geometry after wear at the ball joint or bushings. The direct-fit design supports consistent directional stability and smooth suspension action when servicing the front left lower corner of the vehicle.
What It Is Used For
- Replacing a worn or noisy front left lower control arm
- Correcting looseness from a worn ball joint
- Addressing clunking or shifting caused by deteriorated bushings
- Restoring stable steering feel and suspension alignment behavior
- Servicing front suspension wear on Chevrolet Metro, Pontiac Firefly, Chevrolet Sprint, and Suzuki Swift models
Installation Notes and Tips
Install this assembly on the front left lower position only for the listed applications. Verify vehicle year, make, model, and suspension configuration before installation. Because the ball joint is installed and uses a press-in mounting type, proper suspension service tools and alignment procedures are recommended after replacement. This part cross-references Mevotech Original Grade GS5302 and Mevotech Supreme CMS5302 for the same application.
Quality Assurance
Dorman evaluates this control arm and ball joint assembly through an industry-focused validation process to support ride quality, directional stability, and predictable suspension dynamics. The part is built as a direct replacement for specific OE applications and is intended to match the original mounting and function requirements of the listed vehicles.
Dorman 521-095 Suspension Control Arm and Ball Joint Assembly - Front Left Lower
Dorman 521-095 Front Left Lower Control Arm
Dorman 521-095 is a direct replacement suspension control arm and ball joint assembly for specific front left lower applications. It is built for stable steering response, consistent ride quality, and predictable suspension movement on vehicles such as the Pontiac Firefly, Chevrolet Metro, Chevrolet Sprint, and Suzuki Swift.
Key Features
- Direct replacement for the original equipment control arm and ball joint assembly
- Pre-greased for immediate service
- Steel stamped control arm with black finish
- Ball joint is installed and uses a press-in mounting design
- Rubber bushings included for suspension isolation
- Mounting hardware included
- Regular grade, light suspension application
Detailed Description
This Dorman suspension control arm and ball joint assembly is engineered for front left lower use on select compact vehicles, including 1989-1991 Chevrolet Sprint, 1989-1991 Suzuki Swift, 1989-1991 Pontiac Firefly, and 1992 Chevrolet Metro, plus 1994 Pontiac Firefly. The stamped steel construction, installed ball joint, and included bushings provide a complete OE-style replacement for worn front suspension components. Part number 521-095 is also referenced in aftermarket interchange listings for applications that cross to Mevotech Original Grade GS5302 and Mevotech Supreme CMS5302.
As a replacement suspension control arm assembly, 521-095 helps restore proper wheel location and suspension geometry after wear at the ball joint or bushings. The direct-fit design supports consistent directional stability and smooth suspension action when servicing the front left lower corner of the vehicle.
What It Is Used For
- Replacing a worn or noisy front left lower control arm
- Correcting looseness from a worn ball joint
- Addressing clunking or shifting caused by deteriorated bushings
- Restoring stable steering feel and suspension alignment behavior
- Servicing front suspension wear on Chevrolet Metro, Pontiac Firefly, Chevrolet Sprint, and Suzuki Swift models
Installation Notes and Tips
Install this assembly on the front left lower position only for the listed applications. Verify vehicle year, make, model, and suspension configuration before installation. Because the ball joint is installed and uses a press-in mounting type, proper suspension service tools and alignment procedures are recommended after replacement. This part cross-references Mevotech Original Grade GS5302 and Mevotech Supreme CMS5302 for the same application.
Quality Assurance
Dorman evaluates this control arm and ball joint assembly through an industry-focused validation process to support ride quality, directional stability, and predictable suspension dynamics. The part is built as a direct replacement for specific OE applications and is intended to match the original mounting and function requirements of the listed vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 521-095 Front Left Lower Control Arm
Dorman 521-095 is a direct replacement suspension control arm and ball joint assembly for specific front left lower applications. It is built for stable steering response, consistent ride quality, and predictable suspension movement on vehicles such as the Pontiac Firefly, Chevrolet Metro, Chevrolet Sprint, and Suzuki Swift.
Key Features
- Direct replacement for the original equipment control arm and ball joint assembly
- Pre-greased for immediate service
- Steel stamped control arm with black finish
- Ball joint is installed and uses a press-in mounting design
- Rubber bushings included for suspension isolation
- Mounting hardware included
- Regular grade, light suspension application
Detailed Description
This Dorman suspension control arm and ball joint assembly is engineered for front left lower use on select compact vehicles, including 1989-1991 Chevrolet Sprint, 1989-1991 Suzuki Swift, 1989-1991 Pontiac Firefly, and 1992 Chevrolet Metro, plus 1994 Pontiac Firefly. The stamped steel construction, installed ball joint, and included bushings provide a complete OE-style replacement for worn front suspension components. Part number 521-095 is also referenced in aftermarket interchange listings for applications that cross to Mevotech Original Grade GS5302 and Mevotech Supreme CMS5302.
As a replacement suspension control arm assembly, 521-095 helps restore proper wheel location and suspension geometry after wear at the ball joint or bushings. The direct-fit design supports consistent directional stability and smooth suspension action when servicing the front left lower corner of the vehicle.
What It Is Used For
- Replacing a worn or noisy front left lower control arm
- Correcting looseness from a worn ball joint
- Addressing clunking or shifting caused by deteriorated bushings
- Restoring stable steering feel and suspension alignment behavior
- Servicing front suspension wear on Chevrolet Metro, Pontiac Firefly, Chevrolet Sprint, and Suzuki Swift models
Installation Notes and Tips
Install this assembly on the front left lower position only for the listed applications. Verify vehicle year, make, model, and suspension configuration before installation. Because the ball joint is installed and uses a press-in mounting type, proper suspension service tools and alignment procedures are recommended after replacement. This part cross-references Mevotech Original Grade GS5302 and Mevotech Supreme CMS5302 for the same application.
Quality Assurance
Dorman evaluates this control arm and ball joint assembly through an industry-focused validation process to support ride quality, directional stability, and predictable suspension dynamics. The part is built as a direct replacement for specific OE applications and is intended to match the original mounting and function requirements of the listed vehicles.
