Dorman 521-626 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
Dorman 521-626 Front Right Lower Control Arm
Dorman 521-626 is a direct replacement suspension control arm and ball joint assembly for specific Mercedes-Benz Sprinter, Dodge Sprinter, and Volkswagen Crafter Van applications. It is built for the front right lower position and evaluated to support smooth ride quality, directional stability, and predictable handling.
For buyers searching for a Mercedes-Benz Sprinter 2500 front right lower control arm, Mercedes-Benz Sprinter 3500 front right lower suspension arm, or Volkswagen Crafter Van front right lower ball joint assembly, this OE-style replacement matches the original layout and mounting style.
- Direct replacement for the original equipment design
- Pre-greased for initial service readiness
- Steel control arm construction with black finish
- Ball joint included and installed
- Press-in ball joint mounting with threaded stud
- Mounting hardware included
- Rubber bushing material for suspension isolation
- Light-duty suspension grade type
Detailed Product Overview
This Dorman 521-626 control arm and ball joint assembly is engineered for front right lower suspension service on Mercedes-Benz Sprinter 1500, Sprinter 2500, Sprinter 3500, Sprinter 3500XD, and Sprinter van platforms, along with select Dodge Sprinter and Volkswagen Crafter Van applications. The casting/forged steel arm is paired with an installed ball joint to restore the original suspension geometry at the wheel end.
The assembly uses a press-in ball joint mounting type, a threaded ball joint stud, and rubber bushings to help maintain consistent suspension movement. It cross-references MOOG Chassis Products RK621967 and Delphi TC2449 for the same application.
Common Problems This Part Addresses
- Front-end looseness or wandering on the road
- Clunking or knocking from the front right lower suspension
- Uneven tire wear caused by worn control arm or ball joint components
- Reduced directional stability during braking or lane changes
- Excess play from a worn OE lower control arm assembly
Installation Notes and Tips
Install this assembly in the front right lower position only on the listed vehicle applications. Verify the ball joint mounting style, mounting hole diameter, and control arm dimensions before installation. Because the ball joint is already installed, replacement focuses on swapping the complete assembly rather than servicing the joint separately.
For fitment-focused searches, this part fits 2010-2025 Mercedes-Benz Sprinter 2500, front right lower; 2010-2025 Mercedes-Benz Sprinter 3500, front right lower; 2018-2025 Mercedes-Benz Sprinter 3500XD, front right lower; 2007-2024 Mercedes-Benz Sprinter, front right lower; 2019-2023 Mercedes-Benz Sprinter 1500, front right lower; 2010-2016 Volkswagen Crafter Van, front right lower; 2009 Dodge Sprinter 2500, front right lower; 2009 Dodge Sprinter 3500, front right lower; 2008-2009 Volkswagen Crafter Van, front right lower, wo/Camper Body Stabilizer; 2007-2008 Dodge Sprinter 2500, front right lower, wo/Camper Body Stabilizer; and 2007-2008 Dodge Sprinter 3500, front right lower, wo/Camper Body Stabilizer.
Quality Assurance
Dorman subjects this suspension control arm and ball joint assembly to an industry-focused evaluation process to help deliver consistent ride quality, stability, and handling characteristics. Part number 521-626 is built as a direct replacement for specific OE applications.
Dorman 521-626 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
Dorman 521-626 Front Right Lower Control Arm
Dorman 521-626 is a direct replacement suspension control arm and ball joint assembly for specific Mercedes-Benz Sprinter, Dodge Sprinter, and Volkswagen Crafter Van applications. It is built for the front right lower position and evaluated to support smooth ride quality, directional stability, and predictable handling.
For buyers searching for a Mercedes-Benz Sprinter 2500 front right lower control arm, Mercedes-Benz Sprinter 3500 front right lower suspension arm, or Volkswagen Crafter Van front right lower ball joint assembly, this OE-style replacement matches the original layout and mounting style.
- Direct replacement for the original equipment design
- Pre-greased for initial service readiness
- Steel control arm construction with black finish
- Ball joint included and installed
- Press-in ball joint mounting with threaded stud
- Mounting hardware included
- Rubber bushing material for suspension isolation
- Light-duty suspension grade type
Detailed Product Overview
This Dorman 521-626 control arm and ball joint assembly is engineered for front right lower suspension service on Mercedes-Benz Sprinter 1500, Sprinter 2500, Sprinter 3500, Sprinter 3500XD, and Sprinter van platforms, along with select Dodge Sprinter and Volkswagen Crafter Van applications. The casting/forged steel arm is paired with an installed ball joint to restore the original suspension geometry at the wheel end.
The assembly uses a press-in ball joint mounting type, a threaded ball joint stud, and rubber bushings to help maintain consistent suspension movement. It cross-references MOOG Chassis Products RK621967 and Delphi TC2449 for the same application.
Common Problems This Part Addresses
- Front-end looseness or wandering on the road
- Clunking or knocking from the front right lower suspension
- Uneven tire wear caused by worn control arm or ball joint components
- Reduced directional stability during braking or lane changes
- Excess play from a worn OE lower control arm assembly
Installation Notes and Tips
Install this assembly in the front right lower position only on the listed vehicle applications. Verify the ball joint mounting style, mounting hole diameter, and control arm dimensions before installation. Because the ball joint is already installed, replacement focuses on swapping the complete assembly rather than servicing the joint separately.
For fitment-focused searches, this part fits 2010-2025 Mercedes-Benz Sprinter 2500, front right lower; 2010-2025 Mercedes-Benz Sprinter 3500, front right lower; 2018-2025 Mercedes-Benz Sprinter 3500XD, front right lower; 2007-2024 Mercedes-Benz Sprinter, front right lower; 2019-2023 Mercedes-Benz Sprinter 1500, front right lower; 2010-2016 Volkswagen Crafter Van, front right lower; 2009 Dodge Sprinter 2500, front right lower; 2009 Dodge Sprinter 3500, front right lower; 2008-2009 Volkswagen Crafter Van, front right lower, wo/Camper Body Stabilizer; 2007-2008 Dodge Sprinter 2500, front right lower, wo/Camper Body Stabilizer; and 2007-2008 Dodge Sprinter 3500, front right lower, wo/Camper Body Stabilizer.
Quality Assurance
Dorman subjects this suspension control arm and ball joint assembly to an industry-focused evaluation process to help deliver consistent ride quality, stability, and handling characteristics. Part number 521-626 is built as a direct replacement for specific OE applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 521-626 Front Right Lower Control Arm
Dorman 521-626 is a direct replacement suspension control arm and ball joint assembly for specific Mercedes-Benz Sprinter, Dodge Sprinter, and Volkswagen Crafter Van applications. It is built for the front right lower position and evaluated to support smooth ride quality, directional stability, and predictable handling.
For buyers searching for a Mercedes-Benz Sprinter 2500 front right lower control arm, Mercedes-Benz Sprinter 3500 front right lower suspension arm, or Volkswagen Crafter Van front right lower ball joint assembly, this OE-style replacement matches the original layout and mounting style.
- Direct replacement for the original equipment design
- Pre-greased for initial service readiness
- Steel control arm construction with black finish
- Ball joint included and installed
- Press-in ball joint mounting with threaded stud
- Mounting hardware included
- Rubber bushing material for suspension isolation
- Light-duty suspension grade type
Detailed Product Overview
This Dorman 521-626 control arm and ball joint assembly is engineered for front right lower suspension service on Mercedes-Benz Sprinter 1500, Sprinter 2500, Sprinter 3500, Sprinter 3500XD, and Sprinter van platforms, along with select Dodge Sprinter and Volkswagen Crafter Van applications. The casting/forged steel arm is paired with an installed ball joint to restore the original suspension geometry at the wheel end.
The assembly uses a press-in ball joint mounting type, a threaded ball joint stud, and rubber bushings to help maintain consistent suspension movement. It cross-references MOOG Chassis Products RK621967 and Delphi TC2449 for the same application.
Common Problems This Part Addresses
- Front-end looseness or wandering on the road
- Clunking or knocking from the front right lower suspension
- Uneven tire wear caused by worn control arm or ball joint components
- Reduced directional stability during braking or lane changes
- Excess play from a worn OE lower control arm assembly
Installation Notes and Tips
Install this assembly in the front right lower position only on the listed vehicle applications. Verify the ball joint mounting style, mounting hole diameter, and control arm dimensions before installation. Because the ball joint is already installed, replacement focuses on swapping the complete assembly rather than servicing the joint separately.
For fitment-focused searches, this part fits 2010-2025 Mercedes-Benz Sprinter 2500, front right lower; 2010-2025 Mercedes-Benz Sprinter 3500, front right lower; 2018-2025 Mercedes-Benz Sprinter 3500XD, front right lower; 2007-2024 Mercedes-Benz Sprinter, front right lower; 2019-2023 Mercedes-Benz Sprinter 1500, front right lower; 2010-2016 Volkswagen Crafter Van, front right lower; 2009 Dodge Sprinter 2500, front right lower; 2009 Dodge Sprinter 3500, front right lower; 2008-2009 Volkswagen Crafter Van, front right lower, wo/Camper Body Stabilizer; 2007-2008 Dodge Sprinter 2500, front right lower, wo/Camper Body Stabilizer; and 2007-2008 Dodge Sprinter 3500, front right lower, wo/Camper Body Stabilizer.
Quality Assurance
Dorman subjects this suspension control arm and ball joint assembly to an industry-focused evaluation process to help deliver consistent ride quality, stability, and handling characteristics. Part number 521-626 is built as a direct replacement for specific OE applications.
