Dorman 522-932 Suspension Control Arm - Front Right Lower
Dorman 522-932 Front Right Lower Control Arm
Replace worn suspension hardware with this Dorman suspension control arm for select Isuzu Pickup and Isuzu Trooper applications. Built from stamped steel with a coated black finish, part number 522-932 is made for the front right lower position and follows the original equipment layout for the listed vehicles.
Key Features
- Direct replacement suspension control arm for specific Isuzu applications
- Stamped steel construction for OE-style fit and strength
- Black coated finish for added corrosion resistance
- Rubber bushing included and pre-installed in the arm
- Welded ball joint mounting type with threaded stud design
- No grease fitting, no ball joint, and no mounting hardware included
- Part number 522-932 for easy identification and ordering
Detailed Description
Dorman 522-932 is a front right lower suspension control arm engineered as a replacement for the original equipment on 1984-1987 Isuzu Pickup and 1984-1986 Isuzu Trooper models. It uses steel stamped construction, a black coated finish, and a rubber bushing to match the OE-style mounting layout and suspension geometry for the listed fitments. This control arm is not adjustable and does not include a ball joint, so it is intended for service where the existing suspension components are inspected and replaced as needed. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 1984-1987 Isuzu Pickup, front right lower
- Fits 1984-1986 Isuzu Trooper, front right lower
Common Repair Uses
- Restoring proper front suspension alignment after wear in the original arm
- Replacing a bent or corroded lower control arm on Isuzu Pickup or Isuzu Trooper models
- Addressing clunking, looseness, or uneven tire wear linked to worn suspension bushings
- Correcting steering response issues caused by damaged front right lower suspension components
- Renewing OE-style suspension geometry during front-end repair
Installation Notes and Tips
Confirm the vehicle is a 1984-1987 Isuzu Pickup or 1984-1986 Isuzu Trooper with the front right lower application before installation. Inspect related suspension parts, including the ball joint and mounting points, since this control arm does not include a ball joint or mounting hardware. Verify bushing condition and alignment after installation to complete the repair properly.
Quality Assurance
Dorman manufactures this control arm as a precision-engineered replacement and subjects it to testing for reliable service on the specified vehicles. Part number 522-932 is built to match the OE-style application requirements for the listed Isuzu fitments.
Dorman 522-932 Suspension Control Arm - Front Right Lower
Dorman 522-932 Front Right Lower Control Arm
Replace worn suspension hardware with this Dorman suspension control arm for select Isuzu Pickup and Isuzu Trooper applications. Built from stamped steel with a coated black finish, part number 522-932 is made for the front right lower position and follows the original equipment layout for the listed vehicles.
Key Features
- Direct replacement suspension control arm for specific Isuzu applications
- Stamped steel construction for OE-style fit and strength
- Black coated finish for added corrosion resistance
- Rubber bushing included and pre-installed in the arm
- Welded ball joint mounting type with threaded stud design
- No grease fitting, no ball joint, and no mounting hardware included
- Part number 522-932 for easy identification and ordering
Detailed Description
Dorman 522-932 is a front right lower suspension control arm engineered as a replacement for the original equipment on 1984-1987 Isuzu Pickup and 1984-1986 Isuzu Trooper models. It uses steel stamped construction, a black coated finish, and a rubber bushing to match the OE-style mounting layout and suspension geometry for the listed fitments. This control arm is not adjustable and does not include a ball joint, so it is intended for service where the existing suspension components are inspected and replaced as needed. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 1984-1987 Isuzu Pickup, front right lower
- Fits 1984-1986 Isuzu Trooper, front right lower
Common Repair Uses
- Restoring proper front suspension alignment after wear in the original arm
- Replacing a bent or corroded lower control arm on Isuzu Pickup or Isuzu Trooper models
- Addressing clunking, looseness, or uneven tire wear linked to worn suspension bushings
- Correcting steering response issues caused by damaged front right lower suspension components
- Renewing OE-style suspension geometry during front-end repair
Installation Notes and Tips
Confirm the vehicle is a 1984-1987 Isuzu Pickup or 1984-1986 Isuzu Trooper with the front right lower application before installation. Inspect related suspension parts, including the ball joint and mounting points, since this control arm does not include a ball joint or mounting hardware. Verify bushing condition and alignment after installation to complete the repair properly.
Quality Assurance
Dorman manufactures this control arm as a precision-engineered replacement and subjects it to testing for reliable service on the specified vehicles. Part number 522-932 is built to match the OE-style application requirements for the listed Isuzu fitments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 522-932 Front Right Lower Control Arm
Replace worn suspension hardware with this Dorman suspension control arm for select Isuzu Pickup and Isuzu Trooper applications. Built from stamped steel with a coated black finish, part number 522-932 is made for the front right lower position and follows the original equipment layout for the listed vehicles.
Key Features
- Direct replacement suspension control arm for specific Isuzu applications
- Stamped steel construction for OE-style fit and strength
- Black coated finish for added corrosion resistance
- Rubber bushing included and pre-installed in the arm
- Welded ball joint mounting type with threaded stud design
- No grease fitting, no ball joint, and no mounting hardware included
- Part number 522-932 for easy identification and ordering
Detailed Description
Dorman 522-932 is a front right lower suspension control arm engineered as a replacement for the original equipment on 1984-1987 Isuzu Pickup and 1984-1986 Isuzu Trooper models. It uses steel stamped construction, a black coated finish, and a rubber bushing to match the OE-style mounting layout and suspension geometry for the listed fitments. This control arm is not adjustable and does not include a ball joint, so it is intended for service where the existing suspension components are inspected and replaced as needed. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Vehicle Fitment
- Fits 1984-1987 Isuzu Pickup, front right lower
- Fits 1984-1986 Isuzu Trooper, front right lower
Common Repair Uses
- Restoring proper front suspension alignment after wear in the original arm
- Replacing a bent or corroded lower control arm on Isuzu Pickup or Isuzu Trooper models
- Addressing clunking, looseness, or uneven tire wear linked to worn suspension bushings
- Correcting steering response issues caused by damaged front right lower suspension components
- Renewing OE-style suspension geometry during front-end repair
Installation Notes and Tips
Confirm the vehicle is a 1984-1987 Isuzu Pickup or 1984-1986 Isuzu Trooper with the front right lower application before installation. Inspect related suspension parts, including the ball joint and mounting points, since this control arm does not include a ball joint or mounting hardware. Verify bushing condition and alignment after installation to complete the repair properly.
Quality Assurance
Dorman manufactures this control arm as a precision-engineered replacement and subjects it to testing for reliable service on the specified vehicles. Part number 522-932 is built to match the OE-style application requirements for the listed Isuzu fitments.
