Dorman 526-632 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
Dorman 526-632 Front Right Lower Control Arm
Dorman 526-632 is a direct replacement suspension control arm and ball joint assembly for specific Volkswagen and Audi applications. It is built for the front right lower position and uses a steel control arm with a pre-greased, installed ball joint for consistent steering response and stable road feel.
Key Features
- Direct replacement for the original equipment control arm and ball joint assembly
- Fits the front right lower suspension position on select Volkswagen Jetta, Golf, e-Golf, Golf SportWagen, and Audi A3 models
- Steel control arm construction with black finish
- Ball joint included and installed; bolt-in mounting type
- Pre-greased design with rubber bushings
- Regular grade, light suspension application
- Threaded ball joint stud with 12 mm thread diameter
Detailed Description
This Dorman suspension control arm assembly is engineered as an OE-style replacement for the front right lower suspension on 2014-2025 Volkswagen and Audi vehicles listed in the fitment data. It combines the control arm, bushings, and ball joint into one service part, helping restore proper suspension geometry, directional stability, and predictable handling after wear or damage. The steel casting/forged construction and rubber bushings support everyday driving demands, while the pre-greased, installed ball joint simplifies replacement work.
This part cross-references MOOG Chassis Products RK622883 and Mevotech Supreme CMS701141 for the same application. It is a strong match for drivers searching for a front right lower control arm for Volkswagen Jetta, Golf, or Audi A3 service.
What It Helps Address
- Clunking or knocking from the front suspension
- Loose or imprecise steering feel
- Uneven tire wear caused by worn suspension joints
- Directional instability during braking or cornering
- Excess play from a worn lower control arm or ball joint
Installation Notes and Tips
Verify the front right lower position and confirm vehicle-specific fitment before installation. This assembly uses a bolt-in ball joint mounting type and does not include mounting hardware. Because the ball joint is already installed and the unit is pre-greased, installation focuses on removing the worn OE assembly and transferring the vehicle into proper alignment afterward.
Compatible With 2014-2016 Audi A3, front right lower; 2016-2018 Audi A3 Sportback e-tron, front right lower; 2015-2019 Volkswagen Golf SportWagen, front right lower with steel wheel knuckles; 2015-2020 Volkswagen e-Golf, front right lower; 2015-2021 Volkswagen Golf, front right lower with steel wheel knuckles; 2019-2025 Volkswagen Jetta, front right lower.
Quality Assurance
Dorman uses an industry-leading evaluation process to verify fit, function, and suspension performance characteristics for this replacement assembly. The result is a service part built to support smooth ride quality, directional stability, and predictable dynamics in the specified applications.
Original: $102.46
-65%$102.46
$35.86Dorman 526-632 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
Dorman 526-632 Front Right Lower Control Arm
Dorman 526-632 is a direct replacement suspension control arm and ball joint assembly for specific Volkswagen and Audi applications. It is built for the front right lower position and uses a steel control arm with a pre-greased, installed ball joint for consistent steering response and stable road feel.
Key Features
- Direct replacement for the original equipment control arm and ball joint assembly
- Fits the front right lower suspension position on select Volkswagen Jetta, Golf, e-Golf, Golf SportWagen, and Audi A3 models
- Steel control arm construction with black finish
- Ball joint included and installed; bolt-in mounting type
- Pre-greased design with rubber bushings
- Regular grade, light suspension application
- Threaded ball joint stud with 12 mm thread diameter
Detailed Description
This Dorman suspension control arm assembly is engineered as an OE-style replacement for the front right lower suspension on 2014-2025 Volkswagen and Audi vehicles listed in the fitment data. It combines the control arm, bushings, and ball joint into one service part, helping restore proper suspension geometry, directional stability, and predictable handling after wear or damage. The steel casting/forged construction and rubber bushings support everyday driving demands, while the pre-greased, installed ball joint simplifies replacement work.
This part cross-references MOOG Chassis Products RK622883 and Mevotech Supreme CMS701141 for the same application. It is a strong match for drivers searching for a front right lower control arm for Volkswagen Jetta, Golf, or Audi A3 service.
What It Helps Address
- Clunking or knocking from the front suspension
- Loose or imprecise steering feel
- Uneven tire wear caused by worn suspension joints
- Directional instability during braking or cornering
- Excess play from a worn lower control arm or ball joint
Installation Notes and Tips
Verify the front right lower position and confirm vehicle-specific fitment before installation. This assembly uses a bolt-in ball joint mounting type and does not include mounting hardware. Because the ball joint is already installed and the unit is pre-greased, installation focuses on removing the worn OE assembly and transferring the vehicle into proper alignment afterward.
Compatible With 2014-2016 Audi A3, front right lower; 2016-2018 Audi A3 Sportback e-tron, front right lower; 2015-2019 Volkswagen Golf SportWagen, front right lower with steel wheel knuckles; 2015-2020 Volkswagen e-Golf, front right lower; 2015-2021 Volkswagen Golf, front right lower with steel wheel knuckles; 2019-2025 Volkswagen Jetta, front right lower.
Quality Assurance
Dorman uses an industry-leading evaluation process to verify fit, function, and suspension performance characteristics for this replacement assembly. The result is a service part built to support smooth ride quality, directional stability, and predictable dynamics in the specified applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 526-632 Front Right Lower Control Arm
Dorman 526-632 is a direct replacement suspension control arm and ball joint assembly for specific Volkswagen and Audi applications. It is built for the front right lower position and uses a steel control arm with a pre-greased, installed ball joint for consistent steering response and stable road feel.
Key Features
- Direct replacement for the original equipment control arm and ball joint assembly
- Fits the front right lower suspension position on select Volkswagen Jetta, Golf, e-Golf, Golf SportWagen, and Audi A3 models
- Steel control arm construction with black finish
- Ball joint included and installed; bolt-in mounting type
- Pre-greased design with rubber bushings
- Regular grade, light suspension application
- Threaded ball joint stud with 12 mm thread diameter
Detailed Description
This Dorman suspension control arm assembly is engineered as an OE-style replacement for the front right lower suspension on 2014-2025 Volkswagen and Audi vehicles listed in the fitment data. It combines the control arm, bushings, and ball joint into one service part, helping restore proper suspension geometry, directional stability, and predictable handling after wear or damage. The steel casting/forged construction and rubber bushings support everyday driving demands, while the pre-greased, installed ball joint simplifies replacement work.
This part cross-references MOOG Chassis Products RK622883 and Mevotech Supreme CMS701141 for the same application. It is a strong match for drivers searching for a front right lower control arm for Volkswagen Jetta, Golf, or Audi A3 service.
What It Helps Address
- Clunking or knocking from the front suspension
- Loose or imprecise steering feel
- Uneven tire wear caused by worn suspension joints
- Directional instability during braking or cornering
- Excess play from a worn lower control arm or ball joint
Installation Notes and Tips
Verify the front right lower position and confirm vehicle-specific fitment before installation. This assembly uses a bolt-in ball joint mounting type and does not include mounting hardware. Because the ball joint is already installed and the unit is pre-greased, installation focuses on removing the worn OE assembly and transferring the vehicle into proper alignment afterward.
Compatible With 2014-2016 Audi A3, front right lower; 2016-2018 Audi A3 Sportback e-tron, front right lower; 2015-2019 Volkswagen Golf SportWagen, front right lower with steel wheel knuckles; 2015-2020 Volkswagen e-Golf, front right lower; 2015-2021 Volkswagen Golf, front right lower with steel wheel knuckles; 2019-2025 Volkswagen Jetta, front right lower.
Quality Assurance
Dorman uses an industry-leading evaluation process to verify fit, function, and suspension performance characteristics for this replacement assembly. The result is a service part built to support smooth ride quality, directional stability, and predictable dynamics in the specified applications.
