Dorman 526-835 Suspension Control Arm - Rear Left Lower Forward
Dorman 526-835 Rear Left Lower Forward Control Arm
Dorman 526-835 is a steel suspension control arm built for the rear left lower forward position on select Land Rover applications. It is precision-engineered and tested as an OE-style replacement for the original part on Land Rover Defender, Discovery, Range Rover, and Range Rover Sport models.
Key Features
- Steel stamped construction with a coated black finish
- Rubber and steel bushing design for suspension articulation and mounting stability
- Direct bolt-on attachment type for the rear left lower forward location
- Overall length: 310 mm
- Ball joint not included and not installed
- Grease fitting not included
- Mounting hardware not included
- Part number: 526-835
Detailed Product Overview
This suspension control arm is built to replace the OE arm on specific Land Rover platforms where rear suspension geometry and bushing condition affect ride quality and alignment. The stamped steel body and coated finish support everyday road use, while the included bushing assembly helps restore the connection point between the chassis and suspension. Dorman 526-835 cross-references LR037700 for the same application. It is a direct replacement for rear left lower forward service on Land Rover Defender 90, Defender 110, Defender 130, Discovery, Range Rover, and Range Rover Sport models within the listed years.
Common Problems This Part Can Address
- Rear suspension clunking or knocking from worn control arm bushings
- Excessive rear wheel movement caused by a fatigued arm assembly
- Alignment instability after bushing or arm wear
- Uneven tire wear related to rear suspension looseness
- Restoration of rear left lower forward suspension mounting integrity
Installation Notes and Fitment
- Fits 2020-2024 Land Rover Defender 110, rear left lower forward.
- Fits 2023-2024 Land Rover Defender 130, rear left lower forward.
- Fits 2021-2024 Land Rover Defender 90, rear left lower forward.
- Fits 2017-2024 Land Rover Discovery, rear left lower forward.
- Fits 2013-2022 Land Rover Range Rover, rear left lower forward.
- Fits 2014-2022 Land Rover Range Rover Sport, rear left lower forward.
Verify suspension position before installation, since this arm is specific to the rear left lower forward location. Because mounting hardware is not included, reuse or replacement hardware should be confirmed during service. After installation, a wheel alignment is recommended to verify rear suspension geometry.
Quality Assurance
Dorman manufactures this control arm as a tested replacement part for OE-level fit and function on the listed Land Rover applications. The design focuses on correct dimensions, bushing fit, and durable steel construction for service replacement use.
Original: $62.41
-65%$62.41
$21.84Dorman 526-835 Suspension Control Arm - Rear Left Lower Forward
Dorman 526-835 Rear Left Lower Forward Control Arm
Dorman 526-835 is a steel suspension control arm built for the rear left lower forward position on select Land Rover applications. It is precision-engineered and tested as an OE-style replacement for the original part on Land Rover Defender, Discovery, Range Rover, and Range Rover Sport models.
Key Features
- Steel stamped construction with a coated black finish
- Rubber and steel bushing design for suspension articulation and mounting stability
- Direct bolt-on attachment type for the rear left lower forward location
- Overall length: 310 mm
- Ball joint not included and not installed
- Grease fitting not included
- Mounting hardware not included
- Part number: 526-835
Detailed Product Overview
This suspension control arm is built to replace the OE arm on specific Land Rover platforms where rear suspension geometry and bushing condition affect ride quality and alignment. The stamped steel body and coated finish support everyday road use, while the included bushing assembly helps restore the connection point between the chassis and suspension. Dorman 526-835 cross-references LR037700 for the same application. It is a direct replacement for rear left lower forward service on Land Rover Defender 90, Defender 110, Defender 130, Discovery, Range Rover, and Range Rover Sport models within the listed years.
Common Problems This Part Can Address
- Rear suspension clunking or knocking from worn control arm bushings
- Excessive rear wheel movement caused by a fatigued arm assembly
- Alignment instability after bushing or arm wear
- Uneven tire wear related to rear suspension looseness
- Restoration of rear left lower forward suspension mounting integrity
Installation Notes and Fitment
- Fits 2020-2024 Land Rover Defender 110, rear left lower forward.
- Fits 2023-2024 Land Rover Defender 130, rear left lower forward.
- Fits 2021-2024 Land Rover Defender 90, rear left lower forward.
- Fits 2017-2024 Land Rover Discovery, rear left lower forward.
- Fits 2013-2022 Land Rover Range Rover, rear left lower forward.
- Fits 2014-2022 Land Rover Range Rover Sport, rear left lower forward.
Verify suspension position before installation, since this arm is specific to the rear left lower forward location. Because mounting hardware is not included, reuse or replacement hardware should be confirmed during service. After installation, a wheel alignment is recommended to verify rear suspension geometry.
Quality Assurance
Dorman manufactures this control arm as a tested replacement part for OE-level fit and function on the listed Land Rover applications. The design focuses on correct dimensions, bushing fit, and durable steel construction for service replacement use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 526-835 Rear Left Lower Forward Control Arm
Dorman 526-835 is a steel suspension control arm built for the rear left lower forward position on select Land Rover applications. It is precision-engineered and tested as an OE-style replacement for the original part on Land Rover Defender, Discovery, Range Rover, and Range Rover Sport models.
Key Features
- Steel stamped construction with a coated black finish
- Rubber and steel bushing design for suspension articulation and mounting stability
- Direct bolt-on attachment type for the rear left lower forward location
- Overall length: 310 mm
- Ball joint not included and not installed
- Grease fitting not included
- Mounting hardware not included
- Part number: 526-835
Detailed Product Overview
This suspension control arm is built to replace the OE arm on specific Land Rover platforms where rear suspension geometry and bushing condition affect ride quality and alignment. The stamped steel body and coated finish support everyday road use, while the included bushing assembly helps restore the connection point between the chassis and suspension. Dorman 526-835 cross-references LR037700 for the same application. It is a direct replacement for rear left lower forward service on Land Rover Defender 90, Defender 110, Defender 130, Discovery, Range Rover, and Range Rover Sport models within the listed years.
Common Problems This Part Can Address
- Rear suspension clunking or knocking from worn control arm bushings
- Excessive rear wheel movement caused by a fatigued arm assembly
- Alignment instability after bushing or arm wear
- Uneven tire wear related to rear suspension looseness
- Restoration of rear left lower forward suspension mounting integrity
Installation Notes and Fitment
- Fits 2020-2024 Land Rover Defender 110, rear left lower forward.
- Fits 2023-2024 Land Rover Defender 130, rear left lower forward.
- Fits 2021-2024 Land Rover Defender 90, rear left lower forward.
- Fits 2017-2024 Land Rover Discovery, rear left lower forward.
- Fits 2013-2022 Land Rover Range Rover, rear left lower forward.
- Fits 2014-2022 Land Rover Range Rover Sport, rear left lower forward.
Verify suspension position before installation, since this arm is specific to the rear left lower forward location. Because mounting hardware is not included, reuse or replacement hardware should be confirmed during service. After installation, a wheel alignment is recommended to verify rear suspension geometry.
Quality Assurance
Dorman manufactures this control arm as a tested replacement part for OE-level fit and function on the listed Land Rover applications. The design focuses on correct dimensions, bushing fit, and durable steel construction for service replacement use.
