Dorman 526-994 Suspension Control Arm - Front Right Lower
Dorman 526-994 Front Right Lower Control Arm
This Dorman suspension control arm is a direct replacement for specific Audi front suspension applications. Built from steel with a coated black finish, it is engineered for the front right lower position on select Audi 80, 90, Coupe Quattro, and Cabriolet models.
Key Features
- Steel construction with casting/forged design for OE-style strength
- Black coated finish for added corrosion resistance
- Rubber and steel bushing design for controlled suspension movement
- Press-in end 2 type and bushing linkage end type
- Non-adjustable replacement control arm for the front right lower position
- Fits select Audi 80, 90, 90 Quattro, 80 Quattro, Coupe Quattro, and Cabriolet applications
Detailed Description
Dorman 526-994 is a suspension control arm built for specific Audi front suspension layouts where the original lower arm has worn, bent, or developed excess play. The steel body, forged/cast construction, and coated finish support dependable service in demanding road conditions, while the included bushings help restore proper suspension articulation and alignment stability. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With 1994-1998 Audi Cabriolet, front right lower; 1993-1995 Audi 90, front right lower; 1991 Audi 90, front right lower; 1993-1995 Audi 90 Quattro, front right lower; 1990-1991 Audi 90 Quattro, front right lower; 1991-1992 Audi 80, front right lower; 1990-1992 Audi 80 Quattro, front right lower; 1991 Audi Coupe Quattro, front right lower; 1990 Audi 80, front right lower; 1990 Audi 90, front right lower; 1990 Audi Coupe Quattro, front right lower; 1989 Audi 80 Quattro, front right lower; 1989 Audi 90 Quattro, front right lower; 1988 Audi 80 Quattro, front right lower; 1988 Audi 90 Quattro, front right lower.
Common Problems This Part Addresses
- Clunking or knocking from the front suspension
- Excessive play caused by worn control arm bushings
- Uneven tire wear related to suspension looseness
- Steering instability or wandering at the front end
- Damage from a bent or fatigued lower control arm
Installation Notes and Tips
Verify the vehicle’s VIN and suspension configuration before ordering, especially on 1988-1990 Audi 80, 90, and Coupe Quattro models with cast-arm notes. This control arm is non-adjustable and does not include a ball joint or mounting hardware, so confirm the existing service parts and fasteners before installation. After replacement, a professional wheel alignment is recommended to restore correct suspension geometry.
Quality Assurance
Dorman states that this suspension control arm is precision-engineered and rigorously tested for reliable OE-style replacement on specific vehicles. Part number 526-994 is built to match the application requirements of select Audi front right lower suspension positions.
Dorman 526-994 Suspension Control Arm - Front Right Lower
Dorman 526-994 Front Right Lower Control Arm
This Dorman suspension control arm is a direct replacement for specific Audi front suspension applications. Built from steel with a coated black finish, it is engineered for the front right lower position on select Audi 80, 90, Coupe Quattro, and Cabriolet models.
Key Features
- Steel construction with casting/forged design for OE-style strength
- Black coated finish for added corrosion resistance
- Rubber and steel bushing design for controlled suspension movement
- Press-in end 2 type and bushing linkage end type
- Non-adjustable replacement control arm for the front right lower position
- Fits select Audi 80, 90, 90 Quattro, 80 Quattro, Coupe Quattro, and Cabriolet applications
Detailed Description
Dorman 526-994 is a suspension control arm built for specific Audi front suspension layouts where the original lower arm has worn, bent, or developed excess play. The steel body, forged/cast construction, and coated finish support dependable service in demanding road conditions, while the included bushings help restore proper suspension articulation and alignment stability. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With 1994-1998 Audi Cabriolet, front right lower; 1993-1995 Audi 90, front right lower; 1991 Audi 90, front right lower; 1993-1995 Audi 90 Quattro, front right lower; 1990-1991 Audi 90 Quattro, front right lower; 1991-1992 Audi 80, front right lower; 1990-1992 Audi 80 Quattro, front right lower; 1991 Audi Coupe Quattro, front right lower; 1990 Audi 80, front right lower; 1990 Audi 90, front right lower; 1990 Audi Coupe Quattro, front right lower; 1989 Audi 80 Quattro, front right lower; 1989 Audi 90 Quattro, front right lower; 1988 Audi 80 Quattro, front right lower; 1988 Audi 90 Quattro, front right lower.
Common Problems This Part Addresses
- Clunking or knocking from the front suspension
- Excessive play caused by worn control arm bushings
- Uneven tire wear related to suspension looseness
- Steering instability or wandering at the front end
- Damage from a bent or fatigued lower control arm
Installation Notes and Tips
Verify the vehicle’s VIN and suspension configuration before ordering, especially on 1988-1990 Audi 80, 90, and Coupe Quattro models with cast-arm notes. This control arm is non-adjustable and does not include a ball joint or mounting hardware, so confirm the existing service parts and fasteners before installation. After replacement, a professional wheel alignment is recommended to restore correct suspension geometry.
Quality Assurance
Dorman states that this suspension control arm is precision-engineered and rigorously tested for reliable OE-style replacement on specific vehicles. Part number 526-994 is built to match the application requirements of select Audi front right lower suspension positions.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 526-994 Front Right Lower Control Arm
This Dorman suspension control arm is a direct replacement for specific Audi front suspension applications. Built from steel with a coated black finish, it is engineered for the front right lower position on select Audi 80, 90, Coupe Quattro, and Cabriolet models.
Key Features
- Steel construction with casting/forged design for OE-style strength
- Black coated finish for added corrosion resistance
- Rubber and steel bushing design for controlled suspension movement
- Press-in end 2 type and bushing linkage end type
- Non-adjustable replacement control arm for the front right lower position
- Fits select Audi 80, 90, 90 Quattro, 80 Quattro, Coupe Quattro, and Cabriolet applications
Detailed Description
Dorman 526-994 is a suspension control arm built for specific Audi front suspension layouts where the original lower arm has worn, bent, or developed excess play. The steel body, forged/cast construction, and coated finish support dependable service in demanding road conditions, while the included bushings help restore proper suspension articulation and alignment stability. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With 1994-1998 Audi Cabriolet, front right lower; 1993-1995 Audi 90, front right lower; 1991 Audi 90, front right lower; 1993-1995 Audi 90 Quattro, front right lower; 1990-1991 Audi 90 Quattro, front right lower; 1991-1992 Audi 80, front right lower; 1990-1992 Audi 80 Quattro, front right lower; 1991 Audi Coupe Quattro, front right lower; 1990 Audi 80, front right lower; 1990 Audi 90, front right lower; 1990 Audi Coupe Quattro, front right lower; 1989 Audi 80 Quattro, front right lower; 1989 Audi 90 Quattro, front right lower; 1988 Audi 80 Quattro, front right lower; 1988 Audi 90 Quattro, front right lower.
Common Problems This Part Addresses
- Clunking or knocking from the front suspension
- Excessive play caused by worn control arm bushings
- Uneven tire wear related to suspension looseness
- Steering instability or wandering at the front end
- Damage from a bent or fatigued lower control arm
Installation Notes and Tips
Verify the vehicle’s VIN and suspension configuration before ordering, especially on 1988-1990 Audi 80, 90, and Coupe Quattro models with cast-arm notes. This control arm is non-adjustable and does not include a ball joint or mounting hardware, so confirm the existing service parts and fasteners before installation. After replacement, a professional wheel alignment is recommended to restore correct suspension geometry.
Quality Assurance
Dorman states that this suspension control arm is precision-engineered and rigorously tested for reliable OE-style replacement on specific vehicles. Part number 526-994 is built to match the application requirements of select Audi front right lower suspension positions.
