Dorman 533-093 Alignment Caster / Camber Bushing - Front
Dorman 533-093 Alignment Bushing
Dorman 533-093 is a precision-engineered alignment caster and camber bushing for specific Ford and Dodge front suspension applications. It is built from steel and made as a specific-fit replacement to restore alignment adjustability on vehicles that use caster/camber correction at the front end.
- Steel construction for suspension service
- Specific fit for selected Ford and Dodge applications
- Adjustable design for caster and camber correction
- Standard replacement grade
- Inside diameter: 19.4 mm; outside diameter: 35.55 mm; height: 38 mm
Fitment and Application
Compatible with front suspension setups on Ford Excursion, Ford F-250 Super Duty, Ford F-350 Super Duty, Dodge Ram 3500, Dodge Ram 2500, Ford F-250, Ford F-350, Ford Bronco, and Ford F-150 applications listed below. This part cross-references MOOG Chassis Products (e.g., K8709, K80108) and Mevotech Supreme (e.g., MS40941) for the same application.
- Fits 2000-2005 Ford Excursion, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1999-2004 Ford F-250 Super Duty, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1999-2004 Ford F-350 Super Duty, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1994-2002 Dodge Ram 3500, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1994-1999 Dodge Ram 2500, front — w/Monobeam suspension
- Fits 1980-1999 Ford F-250, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1997 Ford F-350, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1996 Ford Bronco, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1996 Ford F-150, front — adjusts caster/camber -3/4 degree to +2.75 degrees
What This Bushing Helps Correct
- Front-end alignment that will not stay within caster or camber specification
- Uneven tire wear caused by incorrect front suspension geometry
- Steering pull related to alignment angle mismatch
- Suspension service needs on Ford F-150, Ford Bronco, and Super Duty front ends
- Alignment correction after front suspension wear or component replacement
Installation Notes and Tips
Install on the front suspension only for the listed applications. Verify vehicle year, make, model, and suspension configuration before ordering, especially on Dodge Ram 2500 models with Monobeam suspension. After installation, perform a professional wheel alignment to confirm caster and camber settings are within specification.
Quality Assurance
Dorman engineers this alignment caster and camber bushing as a replacement for the original equipment part on specific vehicles. It is tested for fit and function to support reliable suspension service on the listed Ford and Dodge applications.
Dorman 533-093 Alignment Caster / Camber Bushing - Front
Dorman 533-093 Alignment Bushing
Dorman 533-093 is a precision-engineered alignment caster and camber bushing for specific Ford and Dodge front suspension applications. It is built from steel and made as a specific-fit replacement to restore alignment adjustability on vehicles that use caster/camber correction at the front end.
- Steel construction for suspension service
- Specific fit for selected Ford and Dodge applications
- Adjustable design for caster and camber correction
- Standard replacement grade
- Inside diameter: 19.4 mm; outside diameter: 35.55 mm; height: 38 mm
Fitment and Application
Compatible with front suspension setups on Ford Excursion, Ford F-250 Super Duty, Ford F-350 Super Duty, Dodge Ram 3500, Dodge Ram 2500, Ford F-250, Ford F-350, Ford Bronco, and Ford F-150 applications listed below. This part cross-references MOOG Chassis Products (e.g., K8709, K80108) and Mevotech Supreme (e.g., MS40941) for the same application.
- Fits 2000-2005 Ford Excursion, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1999-2004 Ford F-250 Super Duty, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1999-2004 Ford F-350 Super Duty, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1994-2002 Dodge Ram 3500, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1994-1999 Dodge Ram 2500, front — w/Monobeam suspension
- Fits 1980-1999 Ford F-250, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1997 Ford F-350, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1996 Ford Bronco, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1996 Ford F-150, front — adjusts caster/camber -3/4 degree to +2.75 degrees
What This Bushing Helps Correct
- Front-end alignment that will not stay within caster or camber specification
- Uneven tire wear caused by incorrect front suspension geometry
- Steering pull related to alignment angle mismatch
- Suspension service needs on Ford F-150, Ford Bronco, and Super Duty front ends
- Alignment correction after front suspension wear or component replacement
Installation Notes and Tips
Install on the front suspension only for the listed applications. Verify vehicle year, make, model, and suspension configuration before ordering, especially on Dodge Ram 2500 models with Monobeam suspension. After installation, perform a professional wheel alignment to confirm caster and camber settings are within specification.
Quality Assurance
Dorman engineers this alignment caster and camber bushing as a replacement for the original equipment part on specific vehicles. It is tested for fit and function to support reliable suspension service on the listed Ford and Dodge applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-093 Alignment Bushing
Dorman 533-093 is a precision-engineered alignment caster and camber bushing for specific Ford and Dodge front suspension applications. It is built from steel and made as a specific-fit replacement to restore alignment adjustability on vehicles that use caster/camber correction at the front end.
- Steel construction for suspension service
- Specific fit for selected Ford and Dodge applications
- Adjustable design for caster and camber correction
- Standard replacement grade
- Inside diameter: 19.4 mm; outside diameter: 35.55 mm; height: 38 mm
Fitment and Application
Compatible with front suspension setups on Ford Excursion, Ford F-250 Super Duty, Ford F-350 Super Duty, Dodge Ram 3500, Dodge Ram 2500, Ford F-250, Ford F-350, Ford Bronco, and Ford F-150 applications listed below. This part cross-references MOOG Chassis Products (e.g., K8709, K80108) and Mevotech Supreme (e.g., MS40941) for the same application.
- Fits 2000-2005 Ford Excursion, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1999-2004 Ford F-250 Super Duty, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1999-2004 Ford F-350 Super Duty, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1994-2002 Dodge Ram 3500, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1994-1999 Dodge Ram 2500, front — w/Monobeam suspension
- Fits 1980-1999 Ford F-250, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1997 Ford F-350, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1996 Ford Bronco, front — adjusts caster/camber -3/4 degree to +2.75 degrees
- Fits 1980-1996 Ford F-150, front — adjusts caster/camber -3/4 degree to +2.75 degrees
What This Bushing Helps Correct
- Front-end alignment that will not stay within caster or camber specification
- Uneven tire wear caused by incorrect front suspension geometry
- Steering pull related to alignment angle mismatch
- Suspension service needs on Ford F-150, Ford Bronco, and Super Duty front ends
- Alignment correction after front suspension wear or component replacement
Installation Notes and Tips
Install on the front suspension only for the listed applications. Verify vehicle year, make, model, and suspension configuration before ordering, especially on Dodge Ram 2500 models with Monobeam suspension. After installation, perform a professional wheel alignment to confirm caster and camber settings are within specification.
Quality Assurance
Dorman engineers this alignment caster and camber bushing as a replacement for the original equipment part on specific vehicles. It is tested for fit and function to support reliable suspension service on the listed Ford and Dodge applications.
