Dorman 533-362 Suspension Ball Joint - Front Lower
Dorman 533-362 Front Lower Ball Joint
Dorman 533-362 is a threaded suspension ball joint built as a standard replacement for the original equipment on select Jaguar applications. It is precision-engineered and tested for reliable front suspension service on Jaguar XJ6, XJ12, XJS, XJR, XJRS, and Vanden Plas models with front lower fitment.
Key Features
- Threaded, bolt-in suspension ball joint for front lower installation
- Steel construction with a grey finish
- Dust boot included with rubber boot material
- Standard replacement suspension grade
- Tapered stud design with 12 mm wrench size
- Mounting hole quantity: 4
- No grease fitting, no greaseable design
- No castle nut, cotter pin, bushings, washers, or mounting hardware included
Detailed Description
This Dorman suspension ball joint, part number 533-362, is designed for front lower suspension service on specific Jaguar vehicles. It is a direct-fit replacement style component for applications including Jaguar XJ6, XJ12, XJS, XJR, XJRS, and Vanden Plas, helping restore proper steering and suspension articulation where the original ball joint has worn. This part cross-references Delphi TC936 for the same application.
Built from steel and supplied with a rubber dust boot, the 533-362 is made for standard replacement use rather than adjustable or greaseable service. The threaded, bolt-in mounting style and tapered stud support OE-style installation on the listed Jaguar front lower positions. If you are searching for a Jaguar front lower ball joint replacement, Dorman 533-362 is a fitment-specific option for these classic and late-model Jaguar chassis.
What It Is Used For
- Replacing a worn front lower ball joint on Jaguar suspension systems
- Addressing looseness or play in the front end
- Restoring steering response and suspension joint movement
- Correcting clunking or knocking from the lower control area
- Supporting proper wheel alignment after ball joint wear
Installation Notes and Tips
Fits 1972-1997 Jaguar XJ6, front lower; 1973-1979 Jaguar XJ12, front lower; 1981-1992 Jaguar XJ12, front lower; 1994-1996 Jaguar XJ12, front lower; 1976-1996 Jaguar XJS, front lower; 1995-1997 Jaguar Vanden Plas, front lower; 1995-1997 Jaguar XJR, front lower; and 1993 Jaguar XJRS, front lower. Verify the threaded, bolt-in design and tapered stud match the original suspension layout before installation. Because mounting hardware is not included, reuse or source the correct fasteners as needed for the vehicle.
Quality Assurance
Dorman engineers and tests this replacement ball joint to meet the needs of specific OE applications. The part is built as a standard suspension replacement for the listed Jaguar front lower fitments and is manufactured to support consistent service in the suspension system.
Original: $46.46
-65%$46.46
$16.26Dorman 533-362 Suspension Ball Joint - Front Lower
Dorman 533-362 Front Lower Ball Joint
Dorman 533-362 is a threaded suspension ball joint built as a standard replacement for the original equipment on select Jaguar applications. It is precision-engineered and tested for reliable front suspension service on Jaguar XJ6, XJ12, XJS, XJR, XJRS, and Vanden Plas models with front lower fitment.
Key Features
- Threaded, bolt-in suspension ball joint for front lower installation
- Steel construction with a grey finish
- Dust boot included with rubber boot material
- Standard replacement suspension grade
- Tapered stud design with 12 mm wrench size
- Mounting hole quantity: 4
- No grease fitting, no greaseable design
- No castle nut, cotter pin, bushings, washers, or mounting hardware included
Detailed Description
This Dorman suspension ball joint, part number 533-362, is designed for front lower suspension service on specific Jaguar vehicles. It is a direct-fit replacement style component for applications including Jaguar XJ6, XJ12, XJS, XJR, XJRS, and Vanden Plas, helping restore proper steering and suspension articulation where the original ball joint has worn. This part cross-references Delphi TC936 for the same application.
Built from steel and supplied with a rubber dust boot, the 533-362 is made for standard replacement use rather than adjustable or greaseable service. The threaded, bolt-in mounting style and tapered stud support OE-style installation on the listed Jaguar front lower positions. If you are searching for a Jaguar front lower ball joint replacement, Dorman 533-362 is a fitment-specific option for these classic and late-model Jaguar chassis.
What It Is Used For
- Replacing a worn front lower ball joint on Jaguar suspension systems
- Addressing looseness or play in the front end
- Restoring steering response and suspension joint movement
- Correcting clunking or knocking from the lower control area
- Supporting proper wheel alignment after ball joint wear
Installation Notes and Tips
Fits 1972-1997 Jaguar XJ6, front lower; 1973-1979 Jaguar XJ12, front lower; 1981-1992 Jaguar XJ12, front lower; 1994-1996 Jaguar XJ12, front lower; 1976-1996 Jaguar XJS, front lower; 1995-1997 Jaguar Vanden Plas, front lower; 1995-1997 Jaguar XJR, front lower; and 1993 Jaguar XJRS, front lower. Verify the threaded, bolt-in design and tapered stud match the original suspension layout before installation. Because mounting hardware is not included, reuse or source the correct fasteners as needed for the vehicle.
Quality Assurance
Dorman engineers and tests this replacement ball joint to meet the needs of specific OE applications. The part is built as a standard suspension replacement for the listed Jaguar front lower fitments and is manufactured to support consistent service in the suspension system.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-362 Front Lower Ball Joint
Dorman 533-362 is a threaded suspension ball joint built as a standard replacement for the original equipment on select Jaguar applications. It is precision-engineered and tested for reliable front suspension service on Jaguar XJ6, XJ12, XJS, XJR, XJRS, and Vanden Plas models with front lower fitment.
Key Features
- Threaded, bolt-in suspension ball joint for front lower installation
- Steel construction with a grey finish
- Dust boot included with rubber boot material
- Standard replacement suspension grade
- Tapered stud design with 12 mm wrench size
- Mounting hole quantity: 4
- No grease fitting, no greaseable design
- No castle nut, cotter pin, bushings, washers, or mounting hardware included
Detailed Description
This Dorman suspension ball joint, part number 533-362, is designed for front lower suspension service on specific Jaguar vehicles. It is a direct-fit replacement style component for applications including Jaguar XJ6, XJ12, XJS, XJR, XJRS, and Vanden Plas, helping restore proper steering and suspension articulation where the original ball joint has worn. This part cross-references Delphi TC936 for the same application.
Built from steel and supplied with a rubber dust boot, the 533-362 is made for standard replacement use rather than adjustable or greaseable service. The threaded, bolt-in mounting style and tapered stud support OE-style installation on the listed Jaguar front lower positions. If you are searching for a Jaguar front lower ball joint replacement, Dorman 533-362 is a fitment-specific option for these classic and late-model Jaguar chassis.
What It Is Used For
- Replacing a worn front lower ball joint on Jaguar suspension systems
- Addressing looseness or play in the front end
- Restoring steering response and suspension joint movement
- Correcting clunking or knocking from the lower control area
- Supporting proper wheel alignment after ball joint wear
Installation Notes and Tips
Fits 1972-1997 Jaguar XJ6, front lower; 1973-1979 Jaguar XJ12, front lower; 1981-1992 Jaguar XJ12, front lower; 1994-1996 Jaguar XJ12, front lower; 1976-1996 Jaguar XJS, front lower; 1995-1997 Jaguar Vanden Plas, front lower; 1995-1997 Jaguar XJR, front lower; and 1993 Jaguar XJRS, front lower. Verify the threaded, bolt-in design and tapered stud match the original suspension layout before installation. Because mounting hardware is not included, reuse or source the correct fasteners as needed for the vehicle.
Quality Assurance
Dorman engineers and tests this replacement ball joint to meet the needs of specific OE applications. The part is built as a standard suspension replacement for the listed Jaguar front lower fitments and is manufactured to support consistent service in the suspension system.
