Dorman 533-411 Suspension Stabilizer Bar Bushing Kit - Rear To End Link or Rear To Frame
Dorman 533-411 Rear Stabilizer Bar Bushings
Dorman 533-411 is a specific-fit suspension stabilizer bar bushing kit for rear sway bar mounting points on select Dodge and Jeep vehicles. Built from rubber and engineered as a standard replacement, it restores the stabilizer bar’s connection to the frame or end link with the correct fit for the listed applications.
Key Features
- Specific-fit suspension stabilizer bar bushing kit for select rear applications
- Rubber construction for OE-style service replacement
- Black finish
- Designed for rear to frame and rear to end link locations, depending on vehicle application
- Fits stabilizer bars with 15.88 mm or 16 mm diameter bars as listed
- Dorman 533-411 is a standard replacement part for targeted vehicle coverage
Detailed Description
This Dorman sway bar bushing kit is precision-engineered and tested to replace the original equipment bushing on specific vehicles. It is used on rear stabilizer bar mounting points for applications including 1997-2004 Dodge Dakota, 1998-2003 Dodge Durango, and multiple Jeep Cherokee, Grand Cherokee, Grand Wagoneer, Comanche, and Wagoneer configurations. The Dorman 533-411 helps maintain proper stabilizer bar location and consistent suspension movement in rear to frame and rear to end link setups.
This part cross-references MOOG Chassis Products K3160 for the same application.
Vehicle Fitment
- Fits 1997-2004 Dodge Dakota, rear to frame, 16 mm diameter bar
- Fits 1998-2003 Dodge Durango, rear to frame, 16 mm diameter bar
- Fits 2001 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1997-1999 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1991-1995 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1984-1989 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 2000 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1996 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1990 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1993-1998 Jeep Grand Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1993 Jeep Grand Wagoneer, rear to frame, 15.88 mm diameter bar
- Fits 1992 Jeep Comanche, rear to frame, 15.88 mm diameter bar
- Fits 1989-1990 Jeep Comanche, rear to frame, 15.88 mm diameter bar
- Fits 1991 Jeep Comanche, rear to end link, 15.88 mm diameter bar
- Fits 1986-1988 Jeep Comanche, rear to end link, 15.88 mm diameter bar
- Fits 1989-1990 Jeep Wagoneer, rear to end link, 15.88 mm diameter bar
- Fits 1986 Jeep Wagoneer, rear to end link, 15.88 mm diameter bar
- Fits 1987-1988 Jeep Wagoneer, rear to frame, 15.88 mm diameter bar
- Fits 1984-1985 Jeep Wagoneer, rear to frame, 15.88 mm diameter bar
What It Helps Address
- Rear sway bar movement caused by worn bushings
- Clunking or squeaking from stabilizer bar contact points
- Loose-feeling rear suspension response
- Excess play at the stabilizer bar mounting location
- Fitment issues when replacing OE-style rear stabilizer bar bushings on listed Dodge and Jeep models
Installation Notes and Tips
Confirm the stabilizer bar diameter before installation; this part is listed for 15.88 mm and 16 mm bar applications depending on vehicle. Match the mounting location shown in the fitment data, since some vehicles use rear to frame and others use rear to end link positions. Inspect the stabilizer bar, brackets, and surrounding hardware for wear before installing the new bushings.
Quality Assurance
Dorman designs this bushing kit as a direct replacement for the original equipment on the specified vehicles and subjects it to testing for reliable service fit and function. The rubber construction and application-specific dimensions support consistent replacement performance on the listed Dodge Dakota, Dodge Durango, and Jeep models.
Dorman 533-411 Suspension Stabilizer Bar Bushing Kit - Rear To End Link or Rear To Frame
Dorman 533-411 Rear Stabilizer Bar Bushings
Dorman 533-411 is a specific-fit suspension stabilizer bar bushing kit for rear sway bar mounting points on select Dodge and Jeep vehicles. Built from rubber and engineered as a standard replacement, it restores the stabilizer bar’s connection to the frame or end link with the correct fit for the listed applications.
Key Features
- Specific-fit suspension stabilizer bar bushing kit for select rear applications
- Rubber construction for OE-style service replacement
- Black finish
- Designed for rear to frame and rear to end link locations, depending on vehicle application
- Fits stabilizer bars with 15.88 mm or 16 mm diameter bars as listed
- Dorman 533-411 is a standard replacement part for targeted vehicle coverage
Detailed Description
This Dorman sway bar bushing kit is precision-engineered and tested to replace the original equipment bushing on specific vehicles. It is used on rear stabilizer bar mounting points for applications including 1997-2004 Dodge Dakota, 1998-2003 Dodge Durango, and multiple Jeep Cherokee, Grand Cherokee, Grand Wagoneer, Comanche, and Wagoneer configurations. The Dorman 533-411 helps maintain proper stabilizer bar location and consistent suspension movement in rear to frame and rear to end link setups.
This part cross-references MOOG Chassis Products K3160 for the same application.
Vehicle Fitment
- Fits 1997-2004 Dodge Dakota, rear to frame, 16 mm diameter bar
- Fits 1998-2003 Dodge Durango, rear to frame, 16 mm diameter bar
- Fits 2001 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1997-1999 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1991-1995 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1984-1989 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 2000 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1996 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1990 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1993-1998 Jeep Grand Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1993 Jeep Grand Wagoneer, rear to frame, 15.88 mm diameter bar
- Fits 1992 Jeep Comanche, rear to frame, 15.88 mm diameter bar
- Fits 1989-1990 Jeep Comanche, rear to frame, 15.88 mm diameter bar
- Fits 1991 Jeep Comanche, rear to end link, 15.88 mm diameter bar
- Fits 1986-1988 Jeep Comanche, rear to end link, 15.88 mm diameter bar
- Fits 1989-1990 Jeep Wagoneer, rear to end link, 15.88 mm diameter bar
- Fits 1986 Jeep Wagoneer, rear to end link, 15.88 mm diameter bar
- Fits 1987-1988 Jeep Wagoneer, rear to frame, 15.88 mm diameter bar
- Fits 1984-1985 Jeep Wagoneer, rear to frame, 15.88 mm diameter bar
What It Helps Address
- Rear sway bar movement caused by worn bushings
- Clunking or squeaking from stabilizer bar contact points
- Loose-feeling rear suspension response
- Excess play at the stabilizer bar mounting location
- Fitment issues when replacing OE-style rear stabilizer bar bushings on listed Dodge and Jeep models
Installation Notes and Tips
Confirm the stabilizer bar diameter before installation; this part is listed for 15.88 mm and 16 mm bar applications depending on vehicle. Match the mounting location shown in the fitment data, since some vehicles use rear to frame and others use rear to end link positions. Inspect the stabilizer bar, brackets, and surrounding hardware for wear before installing the new bushings.
Quality Assurance
Dorman designs this bushing kit as a direct replacement for the original equipment on the specified vehicles and subjects it to testing for reliable service fit and function. The rubber construction and application-specific dimensions support consistent replacement performance on the listed Dodge Dakota, Dodge Durango, and Jeep models.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-411 Rear Stabilizer Bar Bushings
Dorman 533-411 is a specific-fit suspension stabilizer bar bushing kit for rear sway bar mounting points on select Dodge and Jeep vehicles. Built from rubber and engineered as a standard replacement, it restores the stabilizer bar’s connection to the frame or end link with the correct fit for the listed applications.
Key Features
- Specific-fit suspension stabilizer bar bushing kit for select rear applications
- Rubber construction for OE-style service replacement
- Black finish
- Designed for rear to frame and rear to end link locations, depending on vehicle application
- Fits stabilizer bars with 15.88 mm or 16 mm diameter bars as listed
- Dorman 533-411 is a standard replacement part for targeted vehicle coverage
Detailed Description
This Dorman sway bar bushing kit is precision-engineered and tested to replace the original equipment bushing on specific vehicles. It is used on rear stabilizer bar mounting points for applications including 1997-2004 Dodge Dakota, 1998-2003 Dodge Durango, and multiple Jeep Cherokee, Grand Cherokee, Grand Wagoneer, Comanche, and Wagoneer configurations. The Dorman 533-411 helps maintain proper stabilizer bar location and consistent suspension movement in rear to frame and rear to end link setups.
This part cross-references MOOG Chassis Products K3160 for the same application.
Vehicle Fitment
- Fits 1997-2004 Dodge Dakota, rear to frame, 16 mm diameter bar
- Fits 1998-2003 Dodge Durango, rear to frame, 16 mm diameter bar
- Fits 2001 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1997-1999 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1991-1995 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1984-1989 Jeep Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 2000 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1996 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1990 Jeep Cherokee, rear to end link, 15.88 mm diameter bar
- Fits 1993-1998 Jeep Grand Cherokee, rear to frame, 15.88 mm diameter bar
- Fits 1993 Jeep Grand Wagoneer, rear to frame, 15.88 mm diameter bar
- Fits 1992 Jeep Comanche, rear to frame, 15.88 mm diameter bar
- Fits 1989-1990 Jeep Comanche, rear to frame, 15.88 mm diameter bar
- Fits 1991 Jeep Comanche, rear to end link, 15.88 mm diameter bar
- Fits 1986-1988 Jeep Comanche, rear to end link, 15.88 mm diameter bar
- Fits 1989-1990 Jeep Wagoneer, rear to end link, 15.88 mm diameter bar
- Fits 1986 Jeep Wagoneer, rear to end link, 15.88 mm diameter bar
- Fits 1987-1988 Jeep Wagoneer, rear to frame, 15.88 mm diameter bar
- Fits 1984-1985 Jeep Wagoneer, rear to frame, 15.88 mm diameter bar
What It Helps Address
- Rear sway bar movement caused by worn bushings
- Clunking or squeaking from stabilizer bar contact points
- Loose-feeling rear suspension response
- Excess play at the stabilizer bar mounting location
- Fitment issues when replacing OE-style rear stabilizer bar bushings on listed Dodge and Jeep models
Installation Notes and Tips
Confirm the stabilizer bar diameter before installation; this part is listed for 15.88 mm and 16 mm bar applications depending on vehicle. Match the mounting location shown in the fitment data, since some vehicles use rear to frame and others use rear to end link positions. Inspect the stabilizer bar, brackets, and surrounding hardware for wear before installing the new bushings.
Quality Assurance
Dorman designs this bushing kit as a direct replacement for the original equipment on the specified vehicles and subjects it to testing for reliable service fit and function. The rubber construction and application-specific dimensions support consistent replacement performance on the listed Dodge Dakota, Dodge Durango, and Jeep models.
