Dorman 533-414 Suspension Stabilizer Bar Bushing Kit - Front To Frame or Rear To Frame
Dorman 533-414 Stabilizer Bar Bushing Kit
Dorman 533-414 is a direct replacement suspension stabilizer bar bushing kit for specific Dodge Ram and Jeep applications. It is precision-engineered and tested to match the original equipment fit on vehicles that use a 24 mm stabilizer bar.
Key Features
- Standard replacement stabilizer bar bushing kit for OE-style fit
- Rubber construction with black finish for suspension service applications
- Inside diameter: 22.5 mm; outside diameter: 38.6 mm; length: 4.7 in.
- Specific fit for front-to-frame and rear-to-frame applications listed below
- Compatible with Dodge Ram 1500, Ram 2500, Ram 3500, Ramcharger, and Jeep Cherokee, Grand Cherokee, Wrangler, Grand Wagoneer, Comanche, and Wagoneer
Detailed Description
This Dorman suspension stabilizer bar bushing kit, part number 533-414, is built as a standard replacement for the original equipment bushing on select Dodge and Jeep platforms. The rubber bushing design is sized for a 24 mm diameter bar and is intended for specific front-to-frame and rear-to-frame mounting locations. It cross-references MOOG Chassis Products K3170 for the same application.
Vehicle coverage includes Fits 1997-2002 Dodge Ram 2500, rear to frame; Fits 1997-2002 Dodge Ram 3500, rear to frame; Fits 1997-2001 Dodge Ram 1500, rear to frame; Fits 1999-2001 Dodge Ramcharger, rear to frame; Fits 1984-2001 Jeep Cherokee, front to frame; Fits 1993-1998 Jeep Grand Cherokee, front to frame; Fits 1987-1995 Jeep Wrangler, front to frame; Fits 1993 Jeep Grand Wagoneer, front to frame; Fits 1986-1992 Jeep Comanche, front to frame; and Fits 1984-1990 Jeep Wagoneer, front to frame.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or deteriorated rubber bushings on aging suspension systems
- Noise during cornering or over uneven pavement
- Restoration work on Dodge Ram and Jeep front or rear stabilizer bar mounts
Installation Notes and Tips
Confirm the stabilizer bar diameter before ordering; this part is specified for a 24 mm bar. Verify the mounting position on the vehicle, since coverage includes both front-to-frame and rear-to-frame applications depending on model and year. Inspect the stabilizer bar and frame brackets for wear or corrosion before installation. Mounting hardware is not included.
Quality Assurance
Dorman engineers and tests this bushing kit to provide a reliable OE-style replacement for the listed vehicles. The part number 533-414 is built to standard replacement specifications for consistent fit and serviceability.
Dorman 533-414 Suspension Stabilizer Bar Bushing Kit - Front To Frame or Rear To Frame
Dorman 533-414 Stabilizer Bar Bushing Kit
Dorman 533-414 is a direct replacement suspension stabilizer bar bushing kit for specific Dodge Ram and Jeep applications. It is precision-engineered and tested to match the original equipment fit on vehicles that use a 24 mm stabilizer bar.
Key Features
- Standard replacement stabilizer bar bushing kit for OE-style fit
- Rubber construction with black finish for suspension service applications
- Inside diameter: 22.5 mm; outside diameter: 38.6 mm; length: 4.7 in.
- Specific fit for front-to-frame and rear-to-frame applications listed below
- Compatible with Dodge Ram 1500, Ram 2500, Ram 3500, Ramcharger, and Jeep Cherokee, Grand Cherokee, Wrangler, Grand Wagoneer, Comanche, and Wagoneer
Detailed Description
This Dorman suspension stabilizer bar bushing kit, part number 533-414, is built as a standard replacement for the original equipment bushing on select Dodge and Jeep platforms. The rubber bushing design is sized for a 24 mm diameter bar and is intended for specific front-to-frame and rear-to-frame mounting locations. It cross-references MOOG Chassis Products K3170 for the same application.
Vehicle coverage includes Fits 1997-2002 Dodge Ram 2500, rear to frame; Fits 1997-2002 Dodge Ram 3500, rear to frame; Fits 1997-2001 Dodge Ram 1500, rear to frame; Fits 1999-2001 Dodge Ramcharger, rear to frame; Fits 1984-2001 Jeep Cherokee, front to frame; Fits 1993-1998 Jeep Grand Cherokee, front to frame; Fits 1987-1995 Jeep Wrangler, front to frame; Fits 1993 Jeep Grand Wagoneer, front to frame; Fits 1986-1992 Jeep Comanche, front to frame; and Fits 1984-1990 Jeep Wagoneer, front to frame.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or deteriorated rubber bushings on aging suspension systems
- Noise during cornering or over uneven pavement
- Restoration work on Dodge Ram and Jeep front or rear stabilizer bar mounts
Installation Notes and Tips
Confirm the stabilizer bar diameter before ordering; this part is specified for a 24 mm bar. Verify the mounting position on the vehicle, since coverage includes both front-to-frame and rear-to-frame applications depending on model and year. Inspect the stabilizer bar and frame brackets for wear or corrosion before installation. Mounting hardware is not included.
Quality Assurance
Dorman engineers and tests this bushing kit to provide a reliable OE-style replacement for the listed vehicles. The part number 533-414 is built to standard replacement specifications for consistent fit and serviceability.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-414 Stabilizer Bar Bushing Kit
Dorman 533-414 is a direct replacement suspension stabilizer bar bushing kit for specific Dodge Ram and Jeep applications. It is precision-engineered and tested to match the original equipment fit on vehicles that use a 24 mm stabilizer bar.
Key Features
- Standard replacement stabilizer bar bushing kit for OE-style fit
- Rubber construction with black finish for suspension service applications
- Inside diameter: 22.5 mm; outside diameter: 38.6 mm; length: 4.7 in.
- Specific fit for front-to-frame and rear-to-frame applications listed below
- Compatible with Dodge Ram 1500, Ram 2500, Ram 3500, Ramcharger, and Jeep Cherokee, Grand Cherokee, Wrangler, Grand Wagoneer, Comanche, and Wagoneer
Detailed Description
This Dorman suspension stabilizer bar bushing kit, part number 533-414, is built as a standard replacement for the original equipment bushing on select Dodge and Jeep platforms. The rubber bushing design is sized for a 24 mm diameter bar and is intended for specific front-to-frame and rear-to-frame mounting locations. It cross-references MOOG Chassis Products K3170 for the same application.
Vehicle coverage includes Fits 1997-2002 Dodge Ram 2500, rear to frame; Fits 1997-2002 Dodge Ram 3500, rear to frame; Fits 1997-2001 Dodge Ram 1500, rear to frame; Fits 1999-2001 Dodge Ramcharger, rear to frame; Fits 1984-2001 Jeep Cherokee, front to frame; Fits 1993-1998 Jeep Grand Cherokee, front to frame; Fits 1987-1995 Jeep Wrangler, front to frame; Fits 1993 Jeep Grand Wagoneer, front to frame; Fits 1986-1992 Jeep Comanche, front to frame; and Fits 1984-1990 Jeep Wagoneer, front to frame.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or deteriorated rubber bushings on aging suspension systems
- Noise during cornering or over uneven pavement
- Restoration work on Dodge Ram and Jeep front or rear stabilizer bar mounts
Installation Notes and Tips
Confirm the stabilizer bar diameter before ordering; this part is specified for a 24 mm bar. Verify the mounting position on the vehicle, since coverage includes both front-to-frame and rear-to-frame applications depending on model and year. Inspect the stabilizer bar and frame brackets for wear or corrosion before installation. Mounting hardware is not included.
Quality Assurance
Dorman engineers and tests this bushing kit to provide a reliable OE-style replacement for the listed vehicles. The part number 533-414 is built to standard replacement specifications for consistent fit and serviceability.
