Dorman 533-466 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Dorman 533-466 Stabilizer Bar Bushing Kit
Dorman 533-466 is a suspension stabilizer bar bushing kit made for specific vehicles with a 25 mm front-to-frame sway bar application. The rubber construction and standard replacement design support a direct OE-style service solution for Buick, Chevrolet, Cadillac, Oldsmobile, Pontiac, and GMC models.
Built for front stabilizer bar mounting points, this Dorman sway bar bushing kit helps restore proper bar support on vehicles such as the Chevrolet Caprice, Pontiac Grand Prix, and Buick Regal. It is a specific-fit suspension repair part for applications that call for a 25.40 mm diameter bar or the listed no-tabs-on-clamps configuration.
Key Features
- Rubber stabilizer bar bushings for front-to-frame mounting locations
- Specific-fit replacement for selected GM rear-wheel-drive and S-truck applications
- Standard replacement grade for OE-style service
- Black elastomer/rubber construction
- Designed for 25 mm inside diameter and 40.85 mm outside diameter applications
- Cross-references MOOG Chassis Products K6451 for the same application
Detailed Description
Dorman 533-466 is engineered as a suspension stabilizer bar bushing kit for vehicles that use a front sway bar mounted to the frame. The rubber material helps isolate the stabilizer bar while maintaining the connection needed for consistent suspension response. This part number is listed for a wide range of fitments, including 1980-1996 Chevrolet Caprice, 1988-1996 Pontiac Grand Prix, and 1982-1996 Buick Regal, along with additional Buick, Cadillac, Oldsmobile, Pontiac, Chevrolet, and GMC applications. If you are replacing worn sway bar bushings on a Chevrolet S10, S10 Blazer, or GMC Sonoma, Dorman 533-466 is also cataloged for those front-to-frame, no-tabs-on-clamps applications.
What It Helps Fix
- Clunking or rattling from worn front stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or degraded rubber bushings on the front suspension
- Reduced steering feel caused by worn stabilizer bar support
- Noise from aging bushings on Chevrolet Caprice, Pontiac Grand Prix, and Buick Regal applications
Installation Notes and Tips
Verify the stabilizer bar diameter and mounting style before installation. This part is listed for 25.40 mm diameter bar applications and for vehicles without tabs on the mounting clamps in the specified fitments. Mounting hardware is not included, so reuse or replace related components as needed during service. Confirm the vehicle year, make, model, and front-to-frame configuration before ordering Dorman 533-466.
Quality Assurance
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement performance on the listed vehicles. Dorman 533-466 is a standard replacement part built for specific-fit applications and OE-style service.
Dorman 533-466 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Dorman 533-466 Stabilizer Bar Bushing Kit
Dorman 533-466 is a suspension stabilizer bar bushing kit made for specific vehicles with a 25 mm front-to-frame sway bar application. The rubber construction and standard replacement design support a direct OE-style service solution for Buick, Chevrolet, Cadillac, Oldsmobile, Pontiac, and GMC models.
Built for front stabilizer bar mounting points, this Dorman sway bar bushing kit helps restore proper bar support on vehicles such as the Chevrolet Caprice, Pontiac Grand Prix, and Buick Regal. It is a specific-fit suspension repair part for applications that call for a 25.40 mm diameter bar or the listed no-tabs-on-clamps configuration.
Key Features
- Rubber stabilizer bar bushings for front-to-frame mounting locations
- Specific-fit replacement for selected GM rear-wheel-drive and S-truck applications
- Standard replacement grade for OE-style service
- Black elastomer/rubber construction
- Designed for 25 mm inside diameter and 40.85 mm outside diameter applications
- Cross-references MOOG Chassis Products K6451 for the same application
Detailed Description
Dorman 533-466 is engineered as a suspension stabilizer bar bushing kit for vehicles that use a front sway bar mounted to the frame. The rubber material helps isolate the stabilizer bar while maintaining the connection needed for consistent suspension response. This part number is listed for a wide range of fitments, including 1980-1996 Chevrolet Caprice, 1988-1996 Pontiac Grand Prix, and 1982-1996 Buick Regal, along with additional Buick, Cadillac, Oldsmobile, Pontiac, Chevrolet, and GMC applications. If you are replacing worn sway bar bushings on a Chevrolet S10, S10 Blazer, or GMC Sonoma, Dorman 533-466 is also cataloged for those front-to-frame, no-tabs-on-clamps applications.
What It Helps Fix
- Clunking or rattling from worn front stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or degraded rubber bushings on the front suspension
- Reduced steering feel caused by worn stabilizer bar support
- Noise from aging bushings on Chevrolet Caprice, Pontiac Grand Prix, and Buick Regal applications
Installation Notes and Tips
Verify the stabilizer bar diameter and mounting style before installation. This part is listed for 25.40 mm diameter bar applications and for vehicles without tabs on the mounting clamps in the specified fitments. Mounting hardware is not included, so reuse or replace related components as needed during service. Confirm the vehicle year, make, model, and front-to-frame configuration before ordering Dorman 533-466.
Quality Assurance
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement performance on the listed vehicles. Dorman 533-466 is a standard replacement part built for specific-fit applications and OE-style service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-466 Stabilizer Bar Bushing Kit
Dorman 533-466 is a suspension stabilizer bar bushing kit made for specific vehicles with a 25 mm front-to-frame sway bar application. The rubber construction and standard replacement design support a direct OE-style service solution for Buick, Chevrolet, Cadillac, Oldsmobile, Pontiac, and GMC models.
Built for front stabilizer bar mounting points, this Dorman sway bar bushing kit helps restore proper bar support on vehicles such as the Chevrolet Caprice, Pontiac Grand Prix, and Buick Regal. It is a specific-fit suspension repair part for applications that call for a 25.40 mm diameter bar or the listed no-tabs-on-clamps configuration.
Key Features
- Rubber stabilizer bar bushings for front-to-frame mounting locations
- Specific-fit replacement for selected GM rear-wheel-drive and S-truck applications
- Standard replacement grade for OE-style service
- Black elastomer/rubber construction
- Designed for 25 mm inside diameter and 40.85 mm outside diameter applications
- Cross-references MOOG Chassis Products K6451 for the same application
Detailed Description
Dorman 533-466 is engineered as a suspension stabilizer bar bushing kit for vehicles that use a front sway bar mounted to the frame. The rubber material helps isolate the stabilizer bar while maintaining the connection needed for consistent suspension response. This part number is listed for a wide range of fitments, including 1980-1996 Chevrolet Caprice, 1988-1996 Pontiac Grand Prix, and 1982-1996 Buick Regal, along with additional Buick, Cadillac, Oldsmobile, Pontiac, Chevrolet, and GMC applications. If you are replacing worn sway bar bushings on a Chevrolet S10, S10 Blazer, or GMC Sonoma, Dorman 533-466 is also cataloged for those front-to-frame, no-tabs-on-clamps applications.
What It Helps Fix
- Clunking or rattling from worn front stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or degraded rubber bushings on the front suspension
- Reduced steering feel caused by worn stabilizer bar support
- Noise from aging bushings on Chevrolet Caprice, Pontiac Grand Prix, and Buick Regal applications
Installation Notes and Tips
Verify the stabilizer bar diameter and mounting style before installation. This part is listed for 25.40 mm diameter bar applications and for vehicles without tabs on the mounting clamps in the specified fitments. Mounting hardware is not included, so reuse or replace related components as needed during service. Confirm the vehicle year, make, model, and front-to-frame configuration before ordering Dorman 533-466.
Quality Assurance
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement performance on the listed vehicles. Dorman 533-466 is a standard replacement part built for specific-fit applications and OE-style service.
