Dorman 533-559 Suspension Stabilizer Bar Bushing Kit - Front To Control Arm
Dorman 533-559 Stabilizer Bar Bushings
Dorman 533-559 is a suspension stabilizer bar bushing kit engineered as a standard replacement for the original equipment on specific vehicles. Built from rubber/elastomer material, it is designed for front control arm applications where the sway bar bushing needs renewed support and isolation.
Compatible With long-tail applications such as 1991-2002 Saturn SL front to control arm and 1984-1994 Ford Tempo front to control arm, this Dorman 533-559 kit is also used on Saturn SC, SC1, SC2, SL1, SL2, SW1, SW2, Ford Escort, Mercury Topaz, Mercury Lynx, and Mercury LN7 listings shown below.
- Standard replacement stabilizer bar bushing kit for OE-style service
- Rubber construction for suspension isolation and bar support
- Inside diameter: 0.79 in.
- Outside diameter: 1.625 in.
- Width: 1.625 in.
- Bracket not included
- Grease fitting not included
- Fits front to control arm locations on listed vehicles
Detailed Product Overview
This suspension stabilizer bar bushing kit is precision-engineered and tested to replace the original equipment bushing on specific applications. The rubber material helps restore the interface between the stabilizer bar and control arm, which is important for maintaining consistent suspension response and reducing unwanted movement at the bar mount. Dorman 533-559 is a practical OE-style service part for vehicles that use a front-to-control-arm stabilizer bar bushing arrangement.
This part cross-references MOOG Chassis Products K8436 for the same application.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the control arm mount
- Suspension noise caused by hardened or cracked rubber bushings
- Loose-feeling front suspension response on listed Saturn and Ford applications
- Wear-related deterioration at the stabilizer bar contact point
Installation Notes and Fitment
Install on the front to control arm position only for the vehicles listed in the fitment data. Notes shown in the catalog indicate use without a sleeve repair kit. Verify stabilizer bar diameter and mounting style before installation, and inspect the control arm and bar contact surfaces for wear or damage before reassembly.
- Fits 1993-2002 Saturn SC1, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-2002 Saturn SC2, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL1, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL2, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-2001 Saturn SW2, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-1999 Saturn SW1, front to control arm, wo/Sleeve Repair Kit
- Fits 1984-1994 Ford Tempo, front to control arm, wo/Sleeve Repair Kit
- Fits 1984-1994 Mercury Topaz, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-1992 Saturn SC, front to control arm, wo/Sleeve Repair Kit
- Fits 1981-1990 Ford Escort, front to control arm, wo/Sleeve Repair Kit
- Fits 1981-1987 Mercury Lynx, front to control arm, wo/Sleeve Repair Kit
- Fits 1982-1983 Mercury LN7, front to control arm, wo/Sleeve Repair Kit
Quality Assurance
Dorman positions this stabilizer bar bushing kit as a precision-engineered, rigorously tested replacement for original equipment on the listed vehicles. The part number 533-559 is also referenced in aftermarket catalogs under related chassis part numbers for the same application.
Dorman 533-559 Suspension Stabilizer Bar Bushing Kit - Front To Control Arm
Dorman 533-559 Stabilizer Bar Bushings
Dorman 533-559 is a suspension stabilizer bar bushing kit engineered as a standard replacement for the original equipment on specific vehicles. Built from rubber/elastomer material, it is designed for front control arm applications where the sway bar bushing needs renewed support and isolation.
Compatible With long-tail applications such as 1991-2002 Saturn SL front to control arm and 1984-1994 Ford Tempo front to control arm, this Dorman 533-559 kit is also used on Saturn SC, SC1, SC2, SL1, SL2, SW1, SW2, Ford Escort, Mercury Topaz, Mercury Lynx, and Mercury LN7 listings shown below.
- Standard replacement stabilizer bar bushing kit for OE-style service
- Rubber construction for suspension isolation and bar support
- Inside diameter: 0.79 in.
- Outside diameter: 1.625 in.
- Width: 1.625 in.
- Bracket not included
- Grease fitting not included
- Fits front to control arm locations on listed vehicles
Detailed Product Overview
This suspension stabilizer bar bushing kit is precision-engineered and tested to replace the original equipment bushing on specific applications. The rubber material helps restore the interface between the stabilizer bar and control arm, which is important for maintaining consistent suspension response and reducing unwanted movement at the bar mount. Dorman 533-559 is a practical OE-style service part for vehicles that use a front-to-control-arm stabilizer bar bushing arrangement.
This part cross-references MOOG Chassis Products K8436 for the same application.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the control arm mount
- Suspension noise caused by hardened or cracked rubber bushings
- Loose-feeling front suspension response on listed Saturn and Ford applications
- Wear-related deterioration at the stabilizer bar contact point
Installation Notes and Fitment
Install on the front to control arm position only for the vehicles listed in the fitment data. Notes shown in the catalog indicate use without a sleeve repair kit. Verify stabilizer bar diameter and mounting style before installation, and inspect the control arm and bar contact surfaces for wear or damage before reassembly.
- Fits 1993-2002 Saturn SC1, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-2002 Saturn SC2, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL1, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL2, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-2001 Saturn SW2, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-1999 Saturn SW1, front to control arm, wo/Sleeve Repair Kit
- Fits 1984-1994 Ford Tempo, front to control arm, wo/Sleeve Repair Kit
- Fits 1984-1994 Mercury Topaz, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-1992 Saturn SC, front to control arm, wo/Sleeve Repair Kit
- Fits 1981-1990 Ford Escort, front to control arm, wo/Sleeve Repair Kit
- Fits 1981-1987 Mercury Lynx, front to control arm, wo/Sleeve Repair Kit
- Fits 1982-1983 Mercury LN7, front to control arm, wo/Sleeve Repair Kit
Quality Assurance
Dorman positions this stabilizer bar bushing kit as a precision-engineered, rigorously tested replacement for original equipment on the listed vehicles. The part number 533-559 is also referenced in aftermarket catalogs under related chassis part numbers for the same application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-559 Stabilizer Bar Bushings
Dorman 533-559 is a suspension stabilizer bar bushing kit engineered as a standard replacement for the original equipment on specific vehicles. Built from rubber/elastomer material, it is designed for front control arm applications where the sway bar bushing needs renewed support and isolation.
Compatible With long-tail applications such as 1991-2002 Saturn SL front to control arm and 1984-1994 Ford Tempo front to control arm, this Dorman 533-559 kit is also used on Saturn SC, SC1, SC2, SL1, SL2, SW1, SW2, Ford Escort, Mercury Topaz, Mercury Lynx, and Mercury LN7 listings shown below.
- Standard replacement stabilizer bar bushing kit for OE-style service
- Rubber construction for suspension isolation and bar support
- Inside diameter: 0.79 in.
- Outside diameter: 1.625 in.
- Width: 1.625 in.
- Bracket not included
- Grease fitting not included
- Fits front to control arm locations on listed vehicles
Detailed Product Overview
This suspension stabilizer bar bushing kit is precision-engineered and tested to replace the original equipment bushing on specific applications. The rubber material helps restore the interface between the stabilizer bar and control arm, which is important for maintaining consistent suspension response and reducing unwanted movement at the bar mount. Dorman 533-559 is a practical OE-style service part for vehicles that use a front-to-control-arm stabilizer bar bushing arrangement.
This part cross-references MOOG Chassis Products K8436 for the same application.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the control arm mount
- Suspension noise caused by hardened or cracked rubber bushings
- Loose-feeling front suspension response on listed Saturn and Ford applications
- Wear-related deterioration at the stabilizer bar contact point
Installation Notes and Fitment
Install on the front to control arm position only for the vehicles listed in the fitment data. Notes shown in the catalog indicate use without a sleeve repair kit. Verify stabilizer bar diameter and mounting style before installation, and inspect the control arm and bar contact surfaces for wear or damage before reassembly.
- Fits 1993-2002 Saturn SC1, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-2002 Saturn SC2, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL1, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-2002 Saturn SL2, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-2001 Saturn SW2, front to control arm, wo/Sleeve Repair Kit
- Fits 1993-1999 Saturn SW1, front to control arm, wo/Sleeve Repair Kit
- Fits 1984-1994 Ford Tempo, front to control arm, wo/Sleeve Repair Kit
- Fits 1984-1994 Mercury Topaz, front to control arm, wo/Sleeve Repair Kit
- Fits 1991-1992 Saturn SC, front to control arm, wo/Sleeve Repair Kit
- Fits 1981-1990 Ford Escort, front to control arm, wo/Sleeve Repair Kit
- Fits 1981-1987 Mercury Lynx, front to control arm, wo/Sleeve Repair Kit
- Fits 1982-1983 Mercury LN7, front to control arm, wo/Sleeve Repair Kit
Quality Assurance
Dorman positions this stabilizer bar bushing kit as a precision-engineered, rigorously tested replacement for original equipment on the listed vehicles. The part number 533-559 is also referenced in aftermarket catalogs under related chassis part numbers for the same application.
