Dorman 533-570 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Dorman 533-570 Stabilizer Bar Bushing Kit
Dorman 533-570 is a suspension stabilizer bar bushing kit made for specific Ford applications with a 25.40 mm front sway bar. It uses rubber construction and a standard replacement design to restore a secure stabilizer bar mount at the frame.
Built for front-to-frame mounting, this Dorman sway bar bushing kit supports OE-style service on Ford F-150, Bronco, F-250, F-350, and Econoline models where the original bushing has worn or hardened.
Key Features
- Rubber stabilizer bar bushings for suspension service
- Standard replacement design for specific vehicle fitment
- Black finish
- Inside diameter: 1 in; outside diameter: 1.875 in
- Front-to-frame application for 25.40 mm diameter bars
- Specific fit for selected Ford trucks and vans
Detailed Description
This suspension stabilizer bar bushing kit is engineered as a direct replacement for the original equipment on select Ford chassis applications. The Dorman 533-570 part number is listed for front-to-frame use on vehicles such as the Ford F-150, Ford Bronco, Ford F-250, Ford F-350, and Ford Econoline series, including models with twin I-beam suspension where noted. The rubber material helps maintain stabilizer bar location and reduce unwanted movement at the frame mount.
This part cross-references MOOG Chassis Products K8653 and Mevotech Supreme MK8653 for the same application. If you are searching for a Ford F-150 front sway bar bushing kit, a Ford Bronco stabilizer bar bushing replacement, or a Dorman 533-570 suspension bushing for Econoline front-to-frame service, this part is built around those exact fitment needs.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or degraded front suspension feel
- Noise caused by hardened or cracked rubber bushings
- Restoration of proper stabilizer bar support on specific Ford vehicles
Installation Notes and Tips
Verify bar diameter and mounting location before installation. This kit is specified for a 25.40 mm diameter bar and front-to-frame placement. Inspect the stabilizer bar, brackets, and surrounding hardware for wear or corrosion before reassembly, and replace any damaged components as needed.
Compatible With 1975-1991 Ford E-150 Econoline, front to frame; 1975-1991 Ford E-150 Econoline Club Wagon, front to frame; 1975-1991 Ford E-250 Econoline, front to frame; 1975-1991 Ford E-250 Econoline Club Wagon, front to frame; 1975-1991 Ford E-350 Econoline, front to frame; 1978-1991 Ford F-150, front to frame; 1978-1996 Ford Bronco, front to frame; 1980-1996 Ford F-250, front to frame; 1980-1997 Ford F-350, front to frame; 1984-1989 Ford Bronco II, front to frame; 1997 Ford F-250 HD, front to frame; 1975-1983 Ford E-100 Econoline, front to frame; 1975-1983 Ford E-100 Econoline Club Wagon, front to frame.
Quality Assurance
Dorman states this stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement performance for the original equipment on specific vehicles. The Dorman 533-570 is built as a standard replacement part for confirmed applications.
Dorman 533-570 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Dorman 533-570 Stabilizer Bar Bushing Kit
Dorman 533-570 is a suspension stabilizer bar bushing kit made for specific Ford applications with a 25.40 mm front sway bar. It uses rubber construction and a standard replacement design to restore a secure stabilizer bar mount at the frame.
Built for front-to-frame mounting, this Dorman sway bar bushing kit supports OE-style service on Ford F-150, Bronco, F-250, F-350, and Econoline models where the original bushing has worn or hardened.
Key Features
- Rubber stabilizer bar bushings for suspension service
- Standard replacement design for specific vehicle fitment
- Black finish
- Inside diameter: 1 in; outside diameter: 1.875 in
- Front-to-frame application for 25.40 mm diameter bars
- Specific fit for selected Ford trucks and vans
Detailed Description
This suspension stabilizer bar bushing kit is engineered as a direct replacement for the original equipment on select Ford chassis applications. The Dorman 533-570 part number is listed for front-to-frame use on vehicles such as the Ford F-150, Ford Bronco, Ford F-250, Ford F-350, and Ford Econoline series, including models with twin I-beam suspension where noted. The rubber material helps maintain stabilizer bar location and reduce unwanted movement at the frame mount.
This part cross-references MOOG Chassis Products K8653 and Mevotech Supreme MK8653 for the same application. If you are searching for a Ford F-150 front sway bar bushing kit, a Ford Bronco stabilizer bar bushing replacement, or a Dorman 533-570 suspension bushing for Econoline front-to-frame service, this part is built around those exact fitment needs.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or degraded front suspension feel
- Noise caused by hardened or cracked rubber bushings
- Restoration of proper stabilizer bar support on specific Ford vehicles
Installation Notes and Tips
Verify bar diameter and mounting location before installation. This kit is specified for a 25.40 mm diameter bar and front-to-frame placement. Inspect the stabilizer bar, brackets, and surrounding hardware for wear or corrosion before reassembly, and replace any damaged components as needed.
Compatible With 1975-1991 Ford E-150 Econoline, front to frame; 1975-1991 Ford E-150 Econoline Club Wagon, front to frame; 1975-1991 Ford E-250 Econoline, front to frame; 1975-1991 Ford E-250 Econoline Club Wagon, front to frame; 1975-1991 Ford E-350 Econoline, front to frame; 1978-1991 Ford F-150, front to frame; 1978-1996 Ford Bronco, front to frame; 1980-1996 Ford F-250, front to frame; 1980-1997 Ford F-350, front to frame; 1984-1989 Ford Bronco II, front to frame; 1997 Ford F-250 HD, front to frame; 1975-1983 Ford E-100 Econoline, front to frame; 1975-1983 Ford E-100 Econoline Club Wagon, front to frame.
Quality Assurance
Dorman states this stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement performance for the original equipment on specific vehicles. The Dorman 533-570 is built as a standard replacement part for confirmed applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 533-570 Stabilizer Bar Bushing Kit
Dorman 533-570 is a suspension stabilizer bar bushing kit made for specific Ford applications with a 25.40 mm front sway bar. It uses rubber construction and a standard replacement design to restore a secure stabilizer bar mount at the frame.
Built for front-to-frame mounting, this Dorman sway bar bushing kit supports OE-style service on Ford F-150, Bronco, F-250, F-350, and Econoline models where the original bushing has worn or hardened.
Key Features
- Rubber stabilizer bar bushings for suspension service
- Standard replacement design for specific vehicle fitment
- Black finish
- Inside diameter: 1 in; outside diameter: 1.875 in
- Front-to-frame application for 25.40 mm diameter bars
- Specific fit for selected Ford trucks and vans
Detailed Description
This suspension stabilizer bar bushing kit is engineered as a direct replacement for the original equipment on select Ford chassis applications. The Dorman 533-570 part number is listed for front-to-frame use on vehicles such as the Ford F-150, Ford Bronco, Ford F-250, Ford F-350, and Ford Econoline series, including models with twin I-beam suspension where noted. The rubber material helps maintain stabilizer bar location and reduce unwanted movement at the frame mount.
This part cross-references MOOG Chassis Products K8653 and Mevotech Supreme MK8653 for the same application. If you are searching for a Ford F-150 front sway bar bushing kit, a Ford Bronco stabilizer bar bushing replacement, or a Dorman 533-570 suspension bushing for Econoline front-to-frame service, this part is built around those exact fitment needs.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement at the frame mount
- Loose or degraded front suspension feel
- Noise caused by hardened or cracked rubber bushings
- Restoration of proper stabilizer bar support on specific Ford vehicles
Installation Notes and Tips
Verify bar diameter and mounting location before installation. This kit is specified for a 25.40 mm diameter bar and front-to-frame placement. Inspect the stabilizer bar, brackets, and surrounding hardware for wear or corrosion before reassembly, and replace any damaged components as needed.
Compatible With 1975-1991 Ford E-150 Econoline, front to frame; 1975-1991 Ford E-150 Econoline Club Wagon, front to frame; 1975-1991 Ford E-250 Econoline, front to frame; 1975-1991 Ford E-250 Econoline Club Wagon, front to frame; 1975-1991 Ford E-350 Econoline, front to frame; 1978-1991 Ford F-150, front to frame; 1978-1996 Ford Bronco, front to frame; 1980-1996 Ford F-250, front to frame; 1980-1997 Ford F-350, front to frame; 1984-1989 Ford Bronco II, front to frame; 1997 Ford F-250 HD, front to frame; 1975-1983 Ford E-100 Econoline, front to frame; 1975-1983 Ford E-100 Econoline Club Wagon, front to frame.
Quality Assurance
Dorman states this stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement performance for the original equipment on specific vehicles. The Dorman 533-570 is built as a standard replacement part for confirmed applications.
