Dorman 539-976 Suspension Ball Joint - Front Lower
Suspension Ball Joint Replacement
Dorman 539-976 is a bolt-in suspension ball joint built as a direct replacement for the original equipment on specific vehicles. It is precision-engineered and tested for reliable service, with a steel construction, greaseable design, and included dust boot for added protection.
Compatible With select vehicle applications, this Dorman ball joint supports steering and suspension movement where a worn joint can affect alignment and road feel. The 539-976 part number is also referenced in OE-style replacement searches for Chrysler, Dodge, Jeep, and Ram applications.
Key Features
- Steel suspension ball joint with gray finish
- Bolt-in mounting type for OE-style service replacement
- Greaseable design with grease fitting included
- Dust boot included to help protect the joint
- Castle nut, cotter pin, cotter pin hole, and mounting hardware included
- Standard suspension grade replacement
- Tapered stud design with 21 mm wrench size
- Cross-reference part numbers include MOOG K500176 and Delphi TC5893
Detailed Description
Dorman 539-976 is engineered for drivers and repair shops looking for a dependable suspension ball joint replacement that matches the original equipment layout on specific vehicles. The bolt-on, bolt-in design helps simplify service, while the greaseable construction supports routine maintenance. With a steel body, tapered stud, and dust boot, this ball joint is built for the demands of everyday suspension movement and steering articulation.
Searches for Chrysler, Dodge, Jeep, and Ram suspension ball joint replacement often lead to this part number because it cross-references OE-style applications such as Mopar 68034497AA and related aftermarket numbers. If you are replacing a worn front suspension joint on a compatible Chrysler, Dodge, Jeep, or Ram model, Dorman 539-976 is a direct-fit service part to compare against the original component.
What This Part Helps Address
- Clunking or popping noises from the front suspension
- Excessive play in the steering or suspension joint
- Uneven tire wear caused by worn suspension geometry
- Loose or unstable handling over bumps and turns
- Service replacement for a damaged or worn OE ball joint
Installation Notes and Tips
Verify vehicle application by matching the original part number, mounting style, and stud dimensions before installation. This is a bolt-in suspension ball joint, so inspect the surrounding control arm or knuckle components for wear, corrosion, or damage before assembly. Use the included castle nut and cotter pin during installation, and torque fasteners to the vehicle manufacturer’s specifications. After installation, a professional alignment is recommended.
Quality Assurance
Dorman manufactures this suspension ball joint as a precision-engineered replacement and subjects it to testing for reliable performance on the intended applications. The part is built to meet standard replacement expectations for service work on compatible vehicles.
Dorman 539-976 Suspension Ball Joint - Front Lower
Suspension Ball Joint Replacement
Dorman 539-976 is a bolt-in suspension ball joint built as a direct replacement for the original equipment on specific vehicles. It is precision-engineered and tested for reliable service, with a steel construction, greaseable design, and included dust boot for added protection.
Compatible With select vehicle applications, this Dorman ball joint supports steering and suspension movement where a worn joint can affect alignment and road feel. The 539-976 part number is also referenced in OE-style replacement searches for Chrysler, Dodge, Jeep, and Ram applications.
Key Features
- Steel suspension ball joint with gray finish
- Bolt-in mounting type for OE-style service replacement
- Greaseable design with grease fitting included
- Dust boot included to help protect the joint
- Castle nut, cotter pin, cotter pin hole, and mounting hardware included
- Standard suspension grade replacement
- Tapered stud design with 21 mm wrench size
- Cross-reference part numbers include MOOG K500176 and Delphi TC5893
Detailed Description
Dorman 539-976 is engineered for drivers and repair shops looking for a dependable suspension ball joint replacement that matches the original equipment layout on specific vehicles. The bolt-on, bolt-in design helps simplify service, while the greaseable construction supports routine maintenance. With a steel body, tapered stud, and dust boot, this ball joint is built for the demands of everyday suspension movement and steering articulation.
Searches for Chrysler, Dodge, Jeep, and Ram suspension ball joint replacement often lead to this part number because it cross-references OE-style applications such as Mopar 68034497AA and related aftermarket numbers. If you are replacing a worn front suspension joint on a compatible Chrysler, Dodge, Jeep, or Ram model, Dorman 539-976 is a direct-fit service part to compare against the original component.
What This Part Helps Address
- Clunking or popping noises from the front suspension
- Excessive play in the steering or suspension joint
- Uneven tire wear caused by worn suspension geometry
- Loose or unstable handling over bumps and turns
- Service replacement for a damaged or worn OE ball joint
Installation Notes and Tips
Verify vehicle application by matching the original part number, mounting style, and stud dimensions before installation. This is a bolt-in suspension ball joint, so inspect the surrounding control arm or knuckle components for wear, corrosion, or damage before assembly. Use the included castle nut and cotter pin during installation, and torque fasteners to the vehicle manufacturer’s specifications. After installation, a professional alignment is recommended.
Quality Assurance
Dorman manufactures this suspension ball joint as a precision-engineered replacement and subjects it to testing for reliable performance on the intended applications. The part is built to meet standard replacement expectations for service work on compatible vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Suspension Ball Joint Replacement
Dorman 539-976 is a bolt-in suspension ball joint built as a direct replacement for the original equipment on specific vehicles. It is precision-engineered and tested for reliable service, with a steel construction, greaseable design, and included dust boot for added protection.
Compatible With select vehicle applications, this Dorman ball joint supports steering and suspension movement where a worn joint can affect alignment and road feel. The 539-976 part number is also referenced in OE-style replacement searches for Chrysler, Dodge, Jeep, and Ram applications.
Key Features
- Steel suspension ball joint with gray finish
- Bolt-in mounting type for OE-style service replacement
- Greaseable design with grease fitting included
- Dust boot included to help protect the joint
- Castle nut, cotter pin, cotter pin hole, and mounting hardware included
- Standard suspension grade replacement
- Tapered stud design with 21 mm wrench size
- Cross-reference part numbers include MOOG K500176 and Delphi TC5893
Detailed Description
Dorman 539-976 is engineered for drivers and repair shops looking for a dependable suspension ball joint replacement that matches the original equipment layout on specific vehicles. The bolt-on, bolt-in design helps simplify service, while the greaseable construction supports routine maintenance. With a steel body, tapered stud, and dust boot, this ball joint is built for the demands of everyday suspension movement and steering articulation.
Searches for Chrysler, Dodge, Jeep, and Ram suspension ball joint replacement often lead to this part number because it cross-references OE-style applications such as Mopar 68034497AA and related aftermarket numbers. If you are replacing a worn front suspension joint on a compatible Chrysler, Dodge, Jeep, or Ram model, Dorman 539-976 is a direct-fit service part to compare against the original component.
What This Part Helps Address
- Clunking or popping noises from the front suspension
- Excessive play in the steering or suspension joint
- Uneven tire wear caused by worn suspension geometry
- Loose or unstable handling over bumps and turns
- Service replacement for a damaged or worn OE ball joint
Installation Notes and Tips
Verify vehicle application by matching the original part number, mounting style, and stud dimensions before installation. This is a bolt-in suspension ball joint, so inspect the surrounding control arm or knuckle components for wear, corrosion, or damage before assembly. Use the included castle nut and cotter pin during installation, and torque fasteners to the vehicle manufacturer’s specifications. After installation, a professional alignment is recommended.
Quality Assurance
Dorman manufactures this suspension ball joint as a precision-engineered replacement and subjects it to testing for reliable performance on the intended applications. The part is built to meet standard replacement expectations for service work on compatible vehicles.
