Dorman 540-272 Suspension Stabilizer Bar Bushing Kit - Rear
Dorman 540-272 Rear Stabilizer Bar Bushings
Dorman 540-272 is a rear suspension stabilizer bar bushing kit built as a standard replacement for specific Volkswagen and Audi applications. It uses rubber/elastomer construction to help restore proper sway bar support and reduce movement at the rear stabilizer bar mounting points.
Key Features
- Rubber and elastomer bushing material for OE-style service replacement
- Inside diameter: 15 mm
- Outside diameter: 46 mm
- Width: 46 mm
- Assembled length: 40 mm
- No grease fitting included
- No bracket included
- Standard replacement grade
Product Details
This suspension stabilizer bar bushing kit is precision-engineered and tested for reliable replacement on select rear suspension applications. It is designed for vehicles with 18.50 mm or 19 mm rear stabilizer bars, including Volkswagen Beetle, Jetta, Passat, Golf, Golf R, Golf SportWagen, GTI, GLI, Bora, Tiguan, and Audi TT, TT Quattro, A3, and A3 Quattro. Dorman 540-272 is a direct-fit style solution for restoring stabilizer bar support on the rear suspension of these platforms.
This part cross-references MOOG Chassis Products (e.g., K201861, K201862) for the same application.
What It Helps Address
- Rear sway bar bushing wear
- Clunking or rattling from the rear suspension
- Excess stabilizer bar movement at the mounting point
- Loss of consistent rear suspension control feel
- Noise caused by deteriorated rubber bushings
Installation Notes and Fitment
- Fits 2012-2019 Volkswagen Beetle, rear, 19 mm diameter bar
- Fits 2011-2018 Volkswagen Jetta, rear, w/Independent Rear Suspension
- Fits 2007-2015 Audi TT Quattro, rear
- Fits 2012-2015 Volkswagen Passat, rear, 19 mm diameter bar
- Fits 2007-2014 Audi TT, rear
- Fits 2010-2014 Volkswagen Golf, rear, 18.50 mm diameter bar
- Fits 2009-2013 Audi A3, rear, 18.50 mm diameter bar
- Fits 2004-2013 Audi A3 Quattro, rear, 18.50 mm diameter bar
- Fits 2012-2013 Volkswagen Golf R, rear, 18.50 mm diameter bar
- Fits 2011-2013 Volkswagen Golf SportWagen, rear, 18.50 mm diameter bar
- Fits 2010-2013 Volkswagen GTI, rear, 18.50 mm diameter bar
- Fits 2006-2010 Volkswagen Bora, rear, 19 mm diameter bar
- Fits 2010 Volkswagen GLI, rear, 18.50 mm diameter bar
- Fits 2005-2010 Volkswagen Jetta, rear, 19 mm diameter bar
- Fits 2009 Volkswagen Tiguan, rear, 18.50 mm diameter bar
Verify rear stabilizer bar diameter before installation to confirm the correct bushing size for your vehicle. Dorman 540-272 is a rear suspension stabilizer bar bushing kit for Volkswagen Beetle, Jetta, Golf, GTI, Passat, and Audi A3 and TT applications.
Quality Assurance
Dorman manufactures this replacement bushing kit as a tested OE-style service part for specific vehicle applications. The design focuses on fit, material selection, and dimensional accuracy for dependable suspension service.
Original: $15.50
-65%$15.50
$5.42Dorman 540-272 Suspension Stabilizer Bar Bushing Kit - Rear
Dorman 540-272 Rear Stabilizer Bar Bushings
Dorman 540-272 is a rear suspension stabilizer bar bushing kit built as a standard replacement for specific Volkswagen and Audi applications. It uses rubber/elastomer construction to help restore proper sway bar support and reduce movement at the rear stabilizer bar mounting points.
Key Features
- Rubber and elastomer bushing material for OE-style service replacement
- Inside diameter: 15 mm
- Outside diameter: 46 mm
- Width: 46 mm
- Assembled length: 40 mm
- No grease fitting included
- No bracket included
- Standard replacement grade
Product Details
This suspension stabilizer bar bushing kit is precision-engineered and tested for reliable replacement on select rear suspension applications. It is designed for vehicles with 18.50 mm or 19 mm rear stabilizer bars, including Volkswagen Beetle, Jetta, Passat, Golf, Golf R, Golf SportWagen, GTI, GLI, Bora, Tiguan, and Audi TT, TT Quattro, A3, and A3 Quattro. Dorman 540-272 is a direct-fit style solution for restoring stabilizer bar support on the rear suspension of these platforms.
This part cross-references MOOG Chassis Products (e.g., K201861, K201862) for the same application.
What It Helps Address
- Rear sway bar bushing wear
- Clunking or rattling from the rear suspension
- Excess stabilizer bar movement at the mounting point
- Loss of consistent rear suspension control feel
- Noise caused by deteriorated rubber bushings
Installation Notes and Fitment
- Fits 2012-2019 Volkswagen Beetle, rear, 19 mm diameter bar
- Fits 2011-2018 Volkswagen Jetta, rear, w/Independent Rear Suspension
- Fits 2007-2015 Audi TT Quattro, rear
- Fits 2012-2015 Volkswagen Passat, rear, 19 mm diameter bar
- Fits 2007-2014 Audi TT, rear
- Fits 2010-2014 Volkswagen Golf, rear, 18.50 mm diameter bar
- Fits 2009-2013 Audi A3, rear, 18.50 mm diameter bar
- Fits 2004-2013 Audi A3 Quattro, rear, 18.50 mm diameter bar
- Fits 2012-2013 Volkswagen Golf R, rear, 18.50 mm diameter bar
- Fits 2011-2013 Volkswagen Golf SportWagen, rear, 18.50 mm diameter bar
- Fits 2010-2013 Volkswagen GTI, rear, 18.50 mm diameter bar
- Fits 2006-2010 Volkswagen Bora, rear, 19 mm diameter bar
- Fits 2010 Volkswagen GLI, rear, 18.50 mm diameter bar
- Fits 2005-2010 Volkswagen Jetta, rear, 19 mm diameter bar
- Fits 2009 Volkswagen Tiguan, rear, 18.50 mm diameter bar
Verify rear stabilizer bar diameter before installation to confirm the correct bushing size for your vehicle. Dorman 540-272 is a rear suspension stabilizer bar bushing kit for Volkswagen Beetle, Jetta, Golf, GTI, Passat, and Audi A3 and TT applications.
Quality Assurance
Dorman manufactures this replacement bushing kit as a tested OE-style service part for specific vehicle applications. The design focuses on fit, material selection, and dimensional accuracy for dependable suspension service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 540-272 Rear Stabilizer Bar Bushings
Dorman 540-272 is a rear suspension stabilizer bar bushing kit built as a standard replacement for specific Volkswagen and Audi applications. It uses rubber/elastomer construction to help restore proper sway bar support and reduce movement at the rear stabilizer bar mounting points.
Key Features
- Rubber and elastomer bushing material for OE-style service replacement
- Inside diameter: 15 mm
- Outside diameter: 46 mm
- Width: 46 mm
- Assembled length: 40 mm
- No grease fitting included
- No bracket included
- Standard replacement grade
Product Details
This suspension stabilizer bar bushing kit is precision-engineered and tested for reliable replacement on select rear suspension applications. It is designed for vehicles with 18.50 mm or 19 mm rear stabilizer bars, including Volkswagen Beetle, Jetta, Passat, Golf, Golf R, Golf SportWagen, GTI, GLI, Bora, Tiguan, and Audi TT, TT Quattro, A3, and A3 Quattro. Dorman 540-272 is a direct-fit style solution for restoring stabilizer bar support on the rear suspension of these platforms.
This part cross-references MOOG Chassis Products (e.g., K201861, K201862) for the same application.
What It Helps Address
- Rear sway bar bushing wear
- Clunking or rattling from the rear suspension
- Excess stabilizer bar movement at the mounting point
- Loss of consistent rear suspension control feel
- Noise caused by deteriorated rubber bushings
Installation Notes and Fitment
- Fits 2012-2019 Volkswagen Beetle, rear, 19 mm diameter bar
- Fits 2011-2018 Volkswagen Jetta, rear, w/Independent Rear Suspension
- Fits 2007-2015 Audi TT Quattro, rear
- Fits 2012-2015 Volkswagen Passat, rear, 19 mm diameter bar
- Fits 2007-2014 Audi TT, rear
- Fits 2010-2014 Volkswagen Golf, rear, 18.50 mm diameter bar
- Fits 2009-2013 Audi A3, rear, 18.50 mm diameter bar
- Fits 2004-2013 Audi A3 Quattro, rear, 18.50 mm diameter bar
- Fits 2012-2013 Volkswagen Golf R, rear, 18.50 mm diameter bar
- Fits 2011-2013 Volkswagen Golf SportWagen, rear, 18.50 mm diameter bar
- Fits 2010-2013 Volkswagen GTI, rear, 18.50 mm diameter bar
- Fits 2006-2010 Volkswagen Bora, rear, 19 mm diameter bar
- Fits 2010 Volkswagen GLI, rear, 18.50 mm diameter bar
- Fits 2005-2010 Volkswagen Jetta, rear, 19 mm diameter bar
- Fits 2009 Volkswagen Tiguan, rear, 18.50 mm diameter bar
Verify rear stabilizer bar diameter before installation to confirm the correct bushing size for your vehicle. Dorman 540-272 is a rear suspension stabilizer bar bushing kit for Volkswagen Beetle, Jetta, Golf, GTI, Passat, and Audi A3 and TT applications.
Quality Assurance
Dorman manufactures this replacement bushing kit as a tested OE-style service part for specific vehicle applications. The design focuses on fit, material selection, and dimensional accuracy for dependable suspension service.
