Dorman 540-358 Suspension Stabilizer Bar Bushing Kit - Front
OE-Style Stabilizer Bar Bushing Kit
Dorman 540-358 is a suspension stabilizer bar bushing kit built for specific front suspension applications. It is precision-engineered and tested to replace the original equipment bushing on select Hyundai and Dodge vehicles, helping restore proper sway bar support and suspension control.
For shoppers searching for a front stabilizer bar bushing kit for Hyundai Accent, Hyundai Elantra, Hyundai Veloster, or Dodge Attitude, Dorman 540-358 provides a direct replacement solution for the listed applications.
Key Features
- Rubber construction for OE-style suspension isolation
- Black finish
- Inside diameter: 22 mm
- Outside diameter: 40.5 mm
- Width: 44 mm
- Standard replacement grade
- Bracket included: No
- Mounting hardware included: No
- Grease fitting included: No
Detailed Description
This Dorman stabilizer bar bushing kit is made for front suspension service where the original sway bar bushings have worn, cracked, or lost their ability to hold the bar securely. The rubber material helps maintain the stabilizer bar’s position while reducing unwanted movement and noise at the mounting point. Dorman 540-358 is a practical OE-style replacement for drivers maintaining factory suspension feel on the listed Hyundai Accent, Hyundai Elantra, Hyundai Elantra Coupe, Hyundai Veloster, and Dodge Attitude applications.
This part cross-references MOOG Chassis Products K201451 and TRW JBU2313 for the same application.
Vehicle Fitment
- Fits 2012-2017 Hyundai Accent, front
- Fits 2016-2017 Hyundai Veloster, front, 22 mm diameter bar
- Fits 2014-2016 Hyundai Elantra, front, w/Sport Suspension
- Fits 2012-2014 Dodge Attitude, front
- Fits 2013-2014 Hyundai Elantra Coupe, front, 22 mm diameter bar
- Fits 2012 Hyundai Elantra, front, to 3/01/12
- Fits 2011 Hyundai Elantra, front
Common Problems It Can Help Address
- Clunking or rattling from the front sway bar area
- Excessive stabilizer bar movement at the bushing mount
- Worn, hardened, or cracked original rubber bushings
- Reduced suspension stability during cornering
- Noise caused by loose bar-to-bracket contact
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering, since this part is listed for 22 mm diameter bar applications on select vehicles. Inspect the sway bar, brackets, and surrounding suspension components for wear before installation. Because mounting hardware and brackets are not included, reuse or replace related components as needed during service.
Quality Assurance
Dorman designs this stabilizer bar bushing kit as a precision-engineered replacement and subjects it to testing for reliable fit and function on the specified vehicles.
Original: $20.29
-65%$20.29
$7.10Dorman 540-358 Suspension Stabilizer Bar Bushing Kit - Front
OE-Style Stabilizer Bar Bushing Kit
Dorman 540-358 is a suspension stabilizer bar bushing kit built for specific front suspension applications. It is precision-engineered and tested to replace the original equipment bushing on select Hyundai and Dodge vehicles, helping restore proper sway bar support and suspension control.
For shoppers searching for a front stabilizer bar bushing kit for Hyundai Accent, Hyundai Elantra, Hyundai Veloster, or Dodge Attitude, Dorman 540-358 provides a direct replacement solution for the listed applications.
Key Features
- Rubber construction for OE-style suspension isolation
- Black finish
- Inside diameter: 22 mm
- Outside diameter: 40.5 mm
- Width: 44 mm
- Standard replacement grade
- Bracket included: No
- Mounting hardware included: No
- Grease fitting included: No
Detailed Description
This Dorman stabilizer bar bushing kit is made for front suspension service where the original sway bar bushings have worn, cracked, or lost their ability to hold the bar securely. The rubber material helps maintain the stabilizer bar’s position while reducing unwanted movement and noise at the mounting point. Dorman 540-358 is a practical OE-style replacement for drivers maintaining factory suspension feel on the listed Hyundai Accent, Hyundai Elantra, Hyundai Elantra Coupe, Hyundai Veloster, and Dodge Attitude applications.
This part cross-references MOOG Chassis Products K201451 and TRW JBU2313 for the same application.
Vehicle Fitment
- Fits 2012-2017 Hyundai Accent, front
- Fits 2016-2017 Hyundai Veloster, front, 22 mm diameter bar
- Fits 2014-2016 Hyundai Elantra, front, w/Sport Suspension
- Fits 2012-2014 Dodge Attitude, front
- Fits 2013-2014 Hyundai Elantra Coupe, front, 22 mm diameter bar
- Fits 2012 Hyundai Elantra, front, to 3/01/12
- Fits 2011 Hyundai Elantra, front
Common Problems It Can Help Address
- Clunking or rattling from the front sway bar area
- Excessive stabilizer bar movement at the bushing mount
- Worn, hardened, or cracked original rubber bushings
- Reduced suspension stability during cornering
- Noise caused by loose bar-to-bracket contact
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering, since this part is listed for 22 mm diameter bar applications on select vehicles. Inspect the sway bar, brackets, and surrounding suspension components for wear before installation. Because mounting hardware and brackets are not included, reuse or replace related components as needed during service.
Quality Assurance
Dorman designs this stabilizer bar bushing kit as a precision-engineered replacement and subjects it to testing for reliable fit and function on the specified vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Stabilizer Bar Bushing Kit
Dorman 540-358 is a suspension stabilizer bar bushing kit built for specific front suspension applications. It is precision-engineered and tested to replace the original equipment bushing on select Hyundai and Dodge vehicles, helping restore proper sway bar support and suspension control.
For shoppers searching for a front stabilizer bar bushing kit for Hyundai Accent, Hyundai Elantra, Hyundai Veloster, or Dodge Attitude, Dorman 540-358 provides a direct replacement solution for the listed applications.
Key Features
- Rubber construction for OE-style suspension isolation
- Black finish
- Inside diameter: 22 mm
- Outside diameter: 40.5 mm
- Width: 44 mm
- Standard replacement grade
- Bracket included: No
- Mounting hardware included: No
- Grease fitting included: No
Detailed Description
This Dorman stabilizer bar bushing kit is made for front suspension service where the original sway bar bushings have worn, cracked, or lost their ability to hold the bar securely. The rubber material helps maintain the stabilizer bar’s position while reducing unwanted movement and noise at the mounting point. Dorman 540-358 is a practical OE-style replacement for drivers maintaining factory suspension feel on the listed Hyundai Accent, Hyundai Elantra, Hyundai Elantra Coupe, Hyundai Veloster, and Dodge Attitude applications.
This part cross-references MOOG Chassis Products K201451 and TRW JBU2313 for the same application.
Vehicle Fitment
- Fits 2012-2017 Hyundai Accent, front
- Fits 2016-2017 Hyundai Veloster, front, 22 mm diameter bar
- Fits 2014-2016 Hyundai Elantra, front, w/Sport Suspension
- Fits 2012-2014 Dodge Attitude, front
- Fits 2013-2014 Hyundai Elantra Coupe, front, 22 mm diameter bar
- Fits 2012 Hyundai Elantra, front, to 3/01/12
- Fits 2011 Hyundai Elantra, front
Common Problems It Can Help Address
- Clunking or rattling from the front sway bar area
- Excessive stabilizer bar movement at the bushing mount
- Worn, hardened, or cracked original rubber bushings
- Reduced suspension stability during cornering
- Noise caused by loose bar-to-bracket contact
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering, since this part is listed for 22 mm diameter bar applications on select vehicles. Inspect the sway bar, brackets, and surrounding suspension components for wear before installation. Because mounting hardware and brackets are not included, reuse or replace related components as needed during service.
Quality Assurance
Dorman designs this stabilizer bar bushing kit as a precision-engineered replacement and subjects it to testing for reliable fit and function on the specified vehicles.
