Dorman 540-547 Suspension Stabilizer Bar Bushing Kit - Front or Rear
Dorman 540-547 Stabilizer Bar Bushing Kit
Dorman 540-547 is a suspension stabilizer bar bushing kit built as a standard replacement for specific Toyota applications. It is precision-engineered and tested to match the original equipment fit on select Toyota Celica, Corolla, Tercel, Land Cruiser, 4Runner, Pickup, and Corona models.
Key Features
- Rubber construction for suspension stabilizer bar service
- Black finish
- Specific fit for listed Toyota applications
- Standard replacement grade
- Designed for front and rear stabilizer bar locations, depending on vehicle application
- Part number: 540-547
Detailed Description
This Dorman stabilizer bar bushing kit is made from rubber and sized for a 16 mm inside diameter with a 30.7 mm outside diameter. It is intended for direct replacement use on select Toyota suspension systems where the stabilizer bar bushing has worn, hardened, or lost its original shape. The Dorman 540-547 helps restore proper bar support on vehicles such as Toyota Celica, Corolla, and Tercel, along with Land Cruiser, 4Runner, Pickup, and Corona applications listed below. This part cross-references Delphi TD4629W for the same application.
Vehicle Fitment
- Fits 1994-1997 Toyota Celica, front
- Fits 1971 Toyota Celica, front
- Fits 1975-1979 Toyota Celica, front, 18.50 mm diameter bar
- Fits 1988-1992 Toyota Corolla, rear, 18.50 mm diameter bar
- Fits 1980-1983 Toyota Corolla, rear, 18.50 mm diameter bar
- Fits 1983-1988 Toyota Tercel, rear, 18.50 mm diameter bar
- Fits 1981-1987 Toyota Land Cruiser, front
- Fits 1984-1985 Toyota 4Runner, front, long wheelbase package
- Fits 1979-1985 Toyota Pickup, front, long wheelbase package
- Fits 1977-1978 Toyota Pickup, front, 19 mm diameter bar
- Fits 1978 Toyota Corona, front, to 12/77
- Fits 1977 Toyota Corona, front
- Fits 1971 Toyota Corona, front
- Fits 1974-1976 Toyota Corona, front, 18.50 mm diameter bar
- Fits 1972 Toyota Celica, front, to 2/72
Common Problems This Part Can Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement under cornering load
- Loose or degraded rubber at the stabilizer bar mount point
- Suspension noise caused by hardened or cracked bushings
- Reduced front or rear bar support on listed Toyota models
Installation Notes and Tips
Verify the stabilizer bar diameter and vehicle position before installation, since fitment varies by model, year, and package. Confirm the application against the listed Toyota Celica, Corolla, Tercel, Land Cruiser, 4Runner, Pickup, or Corona configuration, including notes such as long wheelbase package or bar diameter where shown. Mounting hardware and brackets are not included.
Quality Assurance
Dorman designs this suspension stabilizer bar bushing kit as a direct OE-style replacement and subjects it to testing for fit and function on the specified vehicles. The 540-547 is built for standard replacement service on the listed Toyota applications.
Dorman 540-547 Suspension Stabilizer Bar Bushing Kit - Front or Rear
Dorman 540-547 Stabilizer Bar Bushing Kit
Dorman 540-547 is a suspension stabilizer bar bushing kit built as a standard replacement for specific Toyota applications. It is precision-engineered and tested to match the original equipment fit on select Toyota Celica, Corolla, Tercel, Land Cruiser, 4Runner, Pickup, and Corona models.
Key Features
- Rubber construction for suspension stabilizer bar service
- Black finish
- Specific fit for listed Toyota applications
- Standard replacement grade
- Designed for front and rear stabilizer bar locations, depending on vehicle application
- Part number: 540-547
Detailed Description
This Dorman stabilizer bar bushing kit is made from rubber and sized for a 16 mm inside diameter with a 30.7 mm outside diameter. It is intended for direct replacement use on select Toyota suspension systems where the stabilizer bar bushing has worn, hardened, or lost its original shape. The Dorman 540-547 helps restore proper bar support on vehicles such as Toyota Celica, Corolla, and Tercel, along with Land Cruiser, 4Runner, Pickup, and Corona applications listed below. This part cross-references Delphi TD4629W for the same application.
Vehicle Fitment
- Fits 1994-1997 Toyota Celica, front
- Fits 1971 Toyota Celica, front
- Fits 1975-1979 Toyota Celica, front, 18.50 mm diameter bar
- Fits 1988-1992 Toyota Corolla, rear, 18.50 mm diameter bar
- Fits 1980-1983 Toyota Corolla, rear, 18.50 mm diameter bar
- Fits 1983-1988 Toyota Tercel, rear, 18.50 mm diameter bar
- Fits 1981-1987 Toyota Land Cruiser, front
- Fits 1984-1985 Toyota 4Runner, front, long wheelbase package
- Fits 1979-1985 Toyota Pickup, front, long wheelbase package
- Fits 1977-1978 Toyota Pickup, front, 19 mm diameter bar
- Fits 1978 Toyota Corona, front, to 12/77
- Fits 1977 Toyota Corona, front
- Fits 1971 Toyota Corona, front
- Fits 1974-1976 Toyota Corona, front, 18.50 mm diameter bar
- Fits 1972 Toyota Celica, front, to 2/72
Common Problems This Part Can Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement under cornering load
- Loose or degraded rubber at the stabilizer bar mount point
- Suspension noise caused by hardened or cracked bushings
- Reduced front or rear bar support on listed Toyota models
Installation Notes and Tips
Verify the stabilizer bar diameter and vehicle position before installation, since fitment varies by model, year, and package. Confirm the application against the listed Toyota Celica, Corolla, Tercel, Land Cruiser, 4Runner, Pickup, or Corona configuration, including notes such as long wheelbase package or bar diameter where shown. Mounting hardware and brackets are not included.
Quality Assurance
Dorman designs this suspension stabilizer bar bushing kit as a direct OE-style replacement and subjects it to testing for fit and function on the specified vehicles. The 540-547 is built for standard replacement service on the listed Toyota applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 540-547 Stabilizer Bar Bushing Kit
Dorman 540-547 is a suspension stabilizer bar bushing kit built as a standard replacement for specific Toyota applications. It is precision-engineered and tested to match the original equipment fit on select Toyota Celica, Corolla, Tercel, Land Cruiser, 4Runner, Pickup, and Corona models.
Key Features
- Rubber construction for suspension stabilizer bar service
- Black finish
- Specific fit for listed Toyota applications
- Standard replacement grade
- Designed for front and rear stabilizer bar locations, depending on vehicle application
- Part number: 540-547
Detailed Description
This Dorman stabilizer bar bushing kit is made from rubber and sized for a 16 mm inside diameter with a 30.7 mm outside diameter. It is intended for direct replacement use on select Toyota suspension systems where the stabilizer bar bushing has worn, hardened, or lost its original shape. The Dorman 540-547 helps restore proper bar support on vehicles such as Toyota Celica, Corolla, and Tercel, along with Land Cruiser, 4Runner, Pickup, and Corona applications listed below. This part cross-references Delphi TD4629W for the same application.
Vehicle Fitment
- Fits 1994-1997 Toyota Celica, front
- Fits 1971 Toyota Celica, front
- Fits 1975-1979 Toyota Celica, front, 18.50 mm diameter bar
- Fits 1988-1992 Toyota Corolla, rear, 18.50 mm diameter bar
- Fits 1980-1983 Toyota Corolla, rear, 18.50 mm diameter bar
- Fits 1983-1988 Toyota Tercel, rear, 18.50 mm diameter bar
- Fits 1981-1987 Toyota Land Cruiser, front
- Fits 1984-1985 Toyota 4Runner, front, long wheelbase package
- Fits 1979-1985 Toyota Pickup, front, long wheelbase package
- Fits 1977-1978 Toyota Pickup, front, 19 mm diameter bar
- Fits 1978 Toyota Corona, front, to 12/77
- Fits 1977 Toyota Corona, front
- Fits 1971 Toyota Corona, front
- Fits 1974-1976 Toyota Corona, front, 18.50 mm diameter bar
- Fits 1972 Toyota Celica, front, to 2/72
Common Problems This Part Can Address
- Clunking or rattling from worn stabilizer bar bushings
- Excessive sway bar movement under cornering load
- Loose or degraded rubber at the stabilizer bar mount point
- Suspension noise caused by hardened or cracked bushings
- Reduced front or rear bar support on listed Toyota models
Installation Notes and Tips
Verify the stabilizer bar diameter and vehicle position before installation, since fitment varies by model, year, and package. Confirm the application against the listed Toyota Celica, Corolla, Tercel, Land Cruiser, 4Runner, Pickup, or Corona configuration, including notes such as long wheelbase package or bar diameter where shown. Mounting hardware and brackets are not included.
Quality Assurance
Dorman designs this suspension stabilizer bar bushing kit as a direct OE-style replacement and subjects it to testing for fit and function on the specified vehicles. The 540-547 is built for standard replacement service on the listed Toyota applications.
