Dorman 540-613 Suspension Stabilizer Bar Bushing Kit - Front or Front To Frame
Dorman 540-613 Suspension Stabilizer Bar Bushing Kit
Dorman 540-613 is a suspension stabilizer bar bushing kit built as a direct OE-style replacement for specific Ram, Dodge, and Mitsubishi applications. It is engineered for the front stabilizer bar mounting points and uses rubber construction to help restore proper bar support and suspension control.
Key Features
- Rubber stabilizer bar bushings for front suspension service
- Standard replacement grade for OE-style fit and function
- Inside diameter: 33.5 mm
- Outside diameter: 1.865 in; width: 1.865 in
- Assembled length: 2 in
- No grease fitting included
- No bracket included
- Fits front and front-to-frame applications listed below
Detailed Description
This Dorman sway bar bushing kit is precision-engineered and tested to replace worn original equipment bushings on select vehicles. The rubber material helps isolate the stabilizer bar from the frame or mounting point while maintaining the bar’s location during cornering and road input. For shoppers searching for a Ram 2500 front sway bar bushing kit, Dodge Dakota front-to-frame stabilizer bar bushings, or a Dorman 540-613 replacement for Ram 3500 suspension service, this part matches the listed OE-style applications.
This part cross-references MOOG Chassis Products K7383 for the same application.
What It Helps Address
- Clunking or knocking from worn stabilizer bar bushings
- Excessive sway bar movement at the front suspension mount
- Loose or degraded rubber at the stabilizer bar contact point
- Reduced steering response caused by bushing wear
- Noise from front-to-frame stabilizer bar attachment points
Installation Notes and Fitment
Install on the front stabilizer bar locations specified for the vehicle. Verify the stabilizer bar diameter before ordering; listed applications use a 34 mm diameter bar where noted. Compatible With 2019-2025 Ram 2500, front; 2019-2025 Ram 3500, front; 2013-2018 Ram 1500, front to frame; 2011-2018 Ram 2500, front to frame; 2011-2018 Ram 3500, front to frame; 2011-2016 Ram 4000, front to frame; 2006-2012 Dodge Dakota, front to frame; 2000-2002 Dodge Dakota, front to frame; 2011 Ram Dakota, front to frame; 2010 Dodge Ram 2500, front to frame; 2005-2008 Dodge Ram 2500, front to frame; 2002 Dodge Ram 2500, front to frame; 2005-2010 Dodge Ram 3500, front to frame; 2007-2009 Chrysler Aspen, front to frame; 2004-2009 Dodge Durango, front to frame; 2008-2009 Mitsubishi Raider, front to frame; 2001-2008 Dodge Ram 1500, front to frame; 2006-2007 Mitsubishi Raider, front to frame; 2001-2002 Dodge Ram 3500, front to frame.
Quality Assurance
Dorman designs this stabilizer bar bushing kit as a tested replacement for original equipment on the listed vehicles. The part is built to standard replacement specifications for consistent fit and service on the front suspension.
Dorman 540-613 Suspension Stabilizer Bar Bushing Kit - Front or Front To Frame
Dorman 540-613 Suspension Stabilizer Bar Bushing Kit
Dorman 540-613 is a suspension stabilizer bar bushing kit built as a direct OE-style replacement for specific Ram, Dodge, and Mitsubishi applications. It is engineered for the front stabilizer bar mounting points and uses rubber construction to help restore proper bar support and suspension control.
Key Features
- Rubber stabilizer bar bushings for front suspension service
- Standard replacement grade for OE-style fit and function
- Inside diameter: 33.5 mm
- Outside diameter: 1.865 in; width: 1.865 in
- Assembled length: 2 in
- No grease fitting included
- No bracket included
- Fits front and front-to-frame applications listed below
Detailed Description
This Dorman sway bar bushing kit is precision-engineered and tested to replace worn original equipment bushings on select vehicles. The rubber material helps isolate the stabilizer bar from the frame or mounting point while maintaining the bar’s location during cornering and road input. For shoppers searching for a Ram 2500 front sway bar bushing kit, Dodge Dakota front-to-frame stabilizer bar bushings, or a Dorman 540-613 replacement for Ram 3500 suspension service, this part matches the listed OE-style applications.
This part cross-references MOOG Chassis Products K7383 for the same application.
What It Helps Address
- Clunking or knocking from worn stabilizer bar bushings
- Excessive sway bar movement at the front suspension mount
- Loose or degraded rubber at the stabilizer bar contact point
- Reduced steering response caused by bushing wear
- Noise from front-to-frame stabilizer bar attachment points
Installation Notes and Fitment
Install on the front stabilizer bar locations specified for the vehicle. Verify the stabilizer bar diameter before ordering; listed applications use a 34 mm diameter bar where noted. Compatible With 2019-2025 Ram 2500, front; 2019-2025 Ram 3500, front; 2013-2018 Ram 1500, front to frame; 2011-2018 Ram 2500, front to frame; 2011-2018 Ram 3500, front to frame; 2011-2016 Ram 4000, front to frame; 2006-2012 Dodge Dakota, front to frame; 2000-2002 Dodge Dakota, front to frame; 2011 Ram Dakota, front to frame; 2010 Dodge Ram 2500, front to frame; 2005-2008 Dodge Ram 2500, front to frame; 2002 Dodge Ram 2500, front to frame; 2005-2010 Dodge Ram 3500, front to frame; 2007-2009 Chrysler Aspen, front to frame; 2004-2009 Dodge Durango, front to frame; 2008-2009 Mitsubishi Raider, front to frame; 2001-2008 Dodge Ram 1500, front to frame; 2006-2007 Mitsubishi Raider, front to frame; 2001-2002 Dodge Ram 3500, front to frame.
Quality Assurance
Dorman designs this stabilizer bar bushing kit as a tested replacement for original equipment on the listed vehicles. The part is built to standard replacement specifications for consistent fit and service on the front suspension.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 540-613 Suspension Stabilizer Bar Bushing Kit
Dorman 540-613 is a suspension stabilizer bar bushing kit built as a direct OE-style replacement for specific Ram, Dodge, and Mitsubishi applications. It is engineered for the front stabilizer bar mounting points and uses rubber construction to help restore proper bar support and suspension control.
Key Features
- Rubber stabilizer bar bushings for front suspension service
- Standard replacement grade for OE-style fit and function
- Inside diameter: 33.5 mm
- Outside diameter: 1.865 in; width: 1.865 in
- Assembled length: 2 in
- No grease fitting included
- No bracket included
- Fits front and front-to-frame applications listed below
Detailed Description
This Dorman sway bar bushing kit is precision-engineered and tested to replace worn original equipment bushings on select vehicles. The rubber material helps isolate the stabilizer bar from the frame or mounting point while maintaining the bar’s location during cornering and road input. For shoppers searching for a Ram 2500 front sway bar bushing kit, Dodge Dakota front-to-frame stabilizer bar bushings, or a Dorman 540-613 replacement for Ram 3500 suspension service, this part matches the listed OE-style applications.
This part cross-references MOOG Chassis Products K7383 for the same application.
What It Helps Address
- Clunking or knocking from worn stabilizer bar bushings
- Excessive sway bar movement at the front suspension mount
- Loose or degraded rubber at the stabilizer bar contact point
- Reduced steering response caused by bushing wear
- Noise from front-to-frame stabilizer bar attachment points
Installation Notes and Fitment
Install on the front stabilizer bar locations specified for the vehicle. Verify the stabilizer bar diameter before ordering; listed applications use a 34 mm diameter bar where noted. Compatible With 2019-2025 Ram 2500, front; 2019-2025 Ram 3500, front; 2013-2018 Ram 1500, front to frame; 2011-2018 Ram 2500, front to frame; 2011-2018 Ram 3500, front to frame; 2011-2016 Ram 4000, front to frame; 2006-2012 Dodge Dakota, front to frame; 2000-2002 Dodge Dakota, front to frame; 2011 Ram Dakota, front to frame; 2010 Dodge Ram 2500, front to frame; 2005-2008 Dodge Ram 2500, front to frame; 2002 Dodge Ram 2500, front to frame; 2005-2010 Dodge Ram 3500, front to frame; 2007-2009 Chrysler Aspen, front to frame; 2004-2009 Dodge Durango, front to frame; 2008-2009 Mitsubishi Raider, front to frame; 2001-2008 Dodge Ram 1500, front to frame; 2006-2007 Mitsubishi Raider, front to frame; 2001-2002 Dodge Ram 3500, front to frame.
Quality Assurance
Dorman designs this stabilizer bar bushing kit as a tested replacement for original equipment on the listed vehicles. The part is built to standard replacement specifications for consistent fit and service on the front suspension.
