Dorman 540-626 Suspension Stabilizer Bar Bushing Kit - Rear To Frame
Dorman 540-626 Rear Stabilizer Bar Bushings
Dorman 540-626 is a suspension stabilizer bar bushing kit built as a standard replacement for the original equipment on specific vehicles. It is made from rubber/elastomer material and is engineered to restore a secure stabilizer bar mount at the rear-to-frame location.
Compatible With select Dodge Durango and Dodge Dakota applications, this Dorman sway bar bushing replacement is focused on fitment, material consistency, and OE-style dimensions for the listed vehicles.
Key Features
- Standard replacement stabilizer bar bushing kit for rear suspension service
- Rubber/elastomer construction for suspension isolation and bar support
- Inside diameter: 0.71 in.
- Outside diameter: 1.53 in.
- Width: 1.9 in.
- Assembled length: 1.63 in.
- Bracket not included
- Grease fitting not included
Detailed Description
This Dorman 540-626 stabilizer bar bushing kit is precision-engineered and tested to replace the original equipment bushing on the specified rear-to-frame applications. It is designed for the rear stabilizer bar mounting point on 1997-2003 Dodge Dakota and 1999-2003 Dodge Durango models, including 18 mm diameter bar applications and the listed 47.63 mm bushing width note for the 2002 Dakota. The rubber construction helps maintain proper bar location while supporting suspension movement and reducing unwanted play at the mounting point.
This part cross-references MOOG Chassis Products K7385 for the same application. The Dorman 540-626 part number is also commonly searched when replacing rear sway bar bushings on Dodge Durango and Dodge Dakota trucks and SUVs.
Vehicle Fitment
- Fits 1999-2003 Dodge Durango, rear to frame, 18 mm diameter bar.
- Fits 2002 Dodge Dakota, rear to frame, 47.63 mm bushing width.
- Fits 1997-2001 Dodge Dakota, rear to frame, 18 mm diameter bar.
What It Helps Address
- Rear stabilizer bar movement at the frame mount
- Clunking or rattling from worn sway bar bushings
- Excessive play in the rear anti-roll bar connection
- Loss of suspension control caused by deteriorated bushing material
- Noise from cracked, hardened, or compressed rear bushings
Installation Notes and Tips
Verify the rear stabilizer bar diameter and mounting dimensions before installation. Inspect the stabilizer bar, frame bracket area, and surrounding hardware for wear or corrosion before replacing the bushings. Because brackets are not included, reuse or replace the existing mounting hardware as needed based on vehicle condition.
Quality Assurance
Dorman designs this replacement bushing kit to match the original equipment application on the listed Dodge vehicles and subjects it to testing for fit and function. The Dorman 540-626 is a standard replacement part intended for direct service use on the confirmed rear-to-frame applications.
Dorman 540-626 Suspension Stabilizer Bar Bushing Kit - Rear To Frame
Dorman 540-626 Rear Stabilizer Bar Bushings
Dorman 540-626 is a suspension stabilizer bar bushing kit built as a standard replacement for the original equipment on specific vehicles. It is made from rubber/elastomer material and is engineered to restore a secure stabilizer bar mount at the rear-to-frame location.
Compatible With select Dodge Durango and Dodge Dakota applications, this Dorman sway bar bushing replacement is focused on fitment, material consistency, and OE-style dimensions for the listed vehicles.
Key Features
- Standard replacement stabilizer bar bushing kit for rear suspension service
- Rubber/elastomer construction for suspension isolation and bar support
- Inside diameter: 0.71 in.
- Outside diameter: 1.53 in.
- Width: 1.9 in.
- Assembled length: 1.63 in.
- Bracket not included
- Grease fitting not included
Detailed Description
This Dorman 540-626 stabilizer bar bushing kit is precision-engineered and tested to replace the original equipment bushing on the specified rear-to-frame applications. It is designed for the rear stabilizer bar mounting point on 1997-2003 Dodge Dakota and 1999-2003 Dodge Durango models, including 18 mm diameter bar applications and the listed 47.63 mm bushing width note for the 2002 Dakota. The rubber construction helps maintain proper bar location while supporting suspension movement and reducing unwanted play at the mounting point.
This part cross-references MOOG Chassis Products K7385 for the same application. The Dorman 540-626 part number is also commonly searched when replacing rear sway bar bushings on Dodge Durango and Dodge Dakota trucks and SUVs.
Vehicle Fitment
- Fits 1999-2003 Dodge Durango, rear to frame, 18 mm diameter bar.
- Fits 2002 Dodge Dakota, rear to frame, 47.63 mm bushing width.
- Fits 1997-2001 Dodge Dakota, rear to frame, 18 mm diameter bar.
What It Helps Address
- Rear stabilizer bar movement at the frame mount
- Clunking or rattling from worn sway bar bushings
- Excessive play in the rear anti-roll bar connection
- Loss of suspension control caused by deteriorated bushing material
- Noise from cracked, hardened, or compressed rear bushings
Installation Notes and Tips
Verify the rear stabilizer bar diameter and mounting dimensions before installation. Inspect the stabilizer bar, frame bracket area, and surrounding hardware for wear or corrosion before replacing the bushings. Because brackets are not included, reuse or replace the existing mounting hardware as needed based on vehicle condition.
Quality Assurance
Dorman designs this replacement bushing kit to match the original equipment application on the listed Dodge vehicles and subjects it to testing for fit and function. The Dorman 540-626 is a standard replacement part intended for direct service use on the confirmed rear-to-frame applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 540-626 Rear Stabilizer Bar Bushings
Dorman 540-626 is a suspension stabilizer bar bushing kit built as a standard replacement for the original equipment on specific vehicles. It is made from rubber/elastomer material and is engineered to restore a secure stabilizer bar mount at the rear-to-frame location.
Compatible With select Dodge Durango and Dodge Dakota applications, this Dorman sway bar bushing replacement is focused on fitment, material consistency, and OE-style dimensions for the listed vehicles.
Key Features
- Standard replacement stabilizer bar bushing kit for rear suspension service
- Rubber/elastomer construction for suspension isolation and bar support
- Inside diameter: 0.71 in.
- Outside diameter: 1.53 in.
- Width: 1.9 in.
- Assembled length: 1.63 in.
- Bracket not included
- Grease fitting not included
Detailed Description
This Dorman 540-626 stabilizer bar bushing kit is precision-engineered and tested to replace the original equipment bushing on the specified rear-to-frame applications. It is designed for the rear stabilizer bar mounting point on 1997-2003 Dodge Dakota and 1999-2003 Dodge Durango models, including 18 mm diameter bar applications and the listed 47.63 mm bushing width note for the 2002 Dakota. The rubber construction helps maintain proper bar location while supporting suspension movement and reducing unwanted play at the mounting point.
This part cross-references MOOG Chassis Products K7385 for the same application. The Dorman 540-626 part number is also commonly searched when replacing rear sway bar bushings on Dodge Durango and Dodge Dakota trucks and SUVs.
Vehicle Fitment
- Fits 1999-2003 Dodge Durango, rear to frame, 18 mm diameter bar.
- Fits 2002 Dodge Dakota, rear to frame, 47.63 mm bushing width.
- Fits 1997-2001 Dodge Dakota, rear to frame, 18 mm diameter bar.
What It Helps Address
- Rear stabilizer bar movement at the frame mount
- Clunking or rattling from worn sway bar bushings
- Excessive play in the rear anti-roll bar connection
- Loss of suspension control caused by deteriorated bushing material
- Noise from cracked, hardened, or compressed rear bushings
Installation Notes and Tips
Verify the rear stabilizer bar diameter and mounting dimensions before installation. Inspect the stabilizer bar, frame bracket area, and surrounding hardware for wear or corrosion before replacing the bushings. Because brackets are not included, reuse or replace the existing mounting hardware as needed based on vehicle condition.
Quality Assurance
Dorman designs this replacement bushing kit to match the original equipment application on the listed Dodge vehicles and subjects it to testing for fit and function. The Dorman 540-626 is a standard replacement part intended for direct service use on the confirmed rear-to-frame applications.
