Dorman 541-112 Steering Idler Arm and Bracket Assembly
Steering Idler Arm Assembly for Classic GM Applications
Dorman 541-112 is a steering idler arm and bracket assembly built to match the fit, function, and performance of the original part on specific classic GM vehicles. It is a steel, coated replacement with an L-shaped bracket design and an integrated grease fitting for serviceability.
Compatible with Buick Skylark, Chevrolet El Camino, Chevrolet Monte Carlo, Oldsmobile Cutlass, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, Pontiac GTO, Pontiac LeMans, Pontiac Tempest, and Chevrolet Malibu applications that use a 7/8 in. diameter center link.
Key Features
- Brand: Dorman
- Part number: 541-112
- Steel construction with a coated black finish
- Standard replacement grade for steering service
- L-shaped bracket design with 2 bracket holes
- Grease fitting included for routine lubrication
- Arm stud thread diameter: 12 mm
- Bracket stud thread diameter: 10.5 mm
- Mounting hole diameter: 12.1 mm
Detailed Description
This Dorman steering idler arm and bracket assembly is engineered for direct replacement on select 1964-1972 Buick, Chevrolet, Oldsmobile, and Pontiac models. It is built from steel with a coated finish to match original-style steering hardware and restore proper linkage support in vehicles using a 7/8 in. diameter center link. The Dorman 541-112 is a practical OE-style solution for restoring steering response on classic A-body and related GM platforms, including the Chevrolet El Camino, Pontiac GTO, and Oldsmobile Cutlass.
This part cross-references MOOG Chassis Products K5143 and Delphi TA5189 for the same application.
What It Helps Address
- Excessive steering play
- Loose or wandering steering feel
- Worn idler arm support in the steering linkage
- Noise or movement from a deteriorated steering bracket assembly
- Restoration work on classic GM steering systems
Installation Notes and Tips
Verify center link diameter before installation; this application is listed for vehicles with a 7/8 in. diameter center link. Confirm thread sizes and mounting points against the original assembly before service. Grease the fitting during installation and follow the vehicle service manual for alignment checks after replacement.
Quality Assurance
Dorman designs this assembly to match original fit, function, and performance for the listed applications. It is a standard replacement steering component intended for direct service on the specified vehicle years and models.
Vehicle Fitment
- Fits 1964-1972 Buick Skylark, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Chevrolet El Camino, N/A, 7/8 In. Diameter Center Link
- Fits 1970-1972 Chevrolet Monte Carlo, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Oldsmobile Cutlass, N/A, 7/8 In. Diameter Center Link
- Fits 1967-1972 Oldsmobile Cutlass Supreme, N/A, 7/8 In. Diameter Center Link
- Fits 1969-1972 Pontiac Grand Prix, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Pontiac GTO, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Pontiac LeMans, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1970 Pontiac Tempest, N/A, 7/8 In. Diameter Center Link
- Fits 1964 Chevrolet Malibu, N/A, 7/8 In. Diameter Center Link
Original: $66.27
-65%$66.27
$23.19Dorman 541-112 Steering Idler Arm and Bracket Assembly
Steering Idler Arm Assembly for Classic GM Applications
Dorman 541-112 is a steering idler arm and bracket assembly built to match the fit, function, and performance of the original part on specific classic GM vehicles. It is a steel, coated replacement with an L-shaped bracket design and an integrated grease fitting for serviceability.
Compatible with Buick Skylark, Chevrolet El Camino, Chevrolet Monte Carlo, Oldsmobile Cutlass, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, Pontiac GTO, Pontiac LeMans, Pontiac Tempest, and Chevrolet Malibu applications that use a 7/8 in. diameter center link.
Key Features
- Brand: Dorman
- Part number: 541-112
- Steel construction with a coated black finish
- Standard replacement grade for steering service
- L-shaped bracket design with 2 bracket holes
- Grease fitting included for routine lubrication
- Arm stud thread diameter: 12 mm
- Bracket stud thread diameter: 10.5 mm
- Mounting hole diameter: 12.1 mm
Detailed Description
This Dorman steering idler arm and bracket assembly is engineered for direct replacement on select 1964-1972 Buick, Chevrolet, Oldsmobile, and Pontiac models. It is built from steel with a coated finish to match original-style steering hardware and restore proper linkage support in vehicles using a 7/8 in. diameter center link. The Dorman 541-112 is a practical OE-style solution for restoring steering response on classic A-body and related GM platforms, including the Chevrolet El Camino, Pontiac GTO, and Oldsmobile Cutlass.
This part cross-references MOOG Chassis Products K5143 and Delphi TA5189 for the same application.
What It Helps Address
- Excessive steering play
- Loose or wandering steering feel
- Worn idler arm support in the steering linkage
- Noise or movement from a deteriorated steering bracket assembly
- Restoration work on classic GM steering systems
Installation Notes and Tips
Verify center link diameter before installation; this application is listed for vehicles with a 7/8 in. diameter center link. Confirm thread sizes and mounting points against the original assembly before service. Grease the fitting during installation and follow the vehicle service manual for alignment checks after replacement.
Quality Assurance
Dorman designs this assembly to match original fit, function, and performance for the listed applications. It is a standard replacement steering component intended for direct service on the specified vehicle years and models.
Vehicle Fitment
- Fits 1964-1972 Buick Skylark, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Chevrolet El Camino, N/A, 7/8 In. Diameter Center Link
- Fits 1970-1972 Chevrolet Monte Carlo, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Oldsmobile Cutlass, N/A, 7/8 In. Diameter Center Link
- Fits 1967-1972 Oldsmobile Cutlass Supreme, N/A, 7/8 In. Diameter Center Link
- Fits 1969-1972 Pontiac Grand Prix, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Pontiac GTO, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Pontiac LeMans, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1970 Pontiac Tempest, N/A, 7/8 In. Diameter Center Link
- Fits 1964 Chevrolet Malibu, N/A, 7/8 In. Diameter Center Link
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Steering Idler Arm Assembly for Classic GM Applications
Dorman 541-112 is a steering idler arm and bracket assembly built to match the fit, function, and performance of the original part on specific classic GM vehicles. It is a steel, coated replacement with an L-shaped bracket design and an integrated grease fitting for serviceability.
Compatible with Buick Skylark, Chevrolet El Camino, Chevrolet Monte Carlo, Oldsmobile Cutlass, Oldsmobile Cutlass Supreme, Pontiac Grand Prix, Pontiac GTO, Pontiac LeMans, Pontiac Tempest, and Chevrolet Malibu applications that use a 7/8 in. diameter center link.
Key Features
- Brand: Dorman
- Part number: 541-112
- Steel construction with a coated black finish
- Standard replacement grade for steering service
- L-shaped bracket design with 2 bracket holes
- Grease fitting included for routine lubrication
- Arm stud thread diameter: 12 mm
- Bracket stud thread diameter: 10.5 mm
- Mounting hole diameter: 12.1 mm
Detailed Description
This Dorman steering idler arm and bracket assembly is engineered for direct replacement on select 1964-1972 Buick, Chevrolet, Oldsmobile, and Pontiac models. It is built from steel with a coated finish to match original-style steering hardware and restore proper linkage support in vehicles using a 7/8 in. diameter center link. The Dorman 541-112 is a practical OE-style solution for restoring steering response on classic A-body and related GM platforms, including the Chevrolet El Camino, Pontiac GTO, and Oldsmobile Cutlass.
This part cross-references MOOG Chassis Products K5143 and Delphi TA5189 for the same application.
What It Helps Address
- Excessive steering play
- Loose or wandering steering feel
- Worn idler arm support in the steering linkage
- Noise or movement from a deteriorated steering bracket assembly
- Restoration work on classic GM steering systems
Installation Notes and Tips
Verify center link diameter before installation; this application is listed for vehicles with a 7/8 in. diameter center link. Confirm thread sizes and mounting points against the original assembly before service. Grease the fitting during installation and follow the vehicle service manual for alignment checks after replacement.
Quality Assurance
Dorman designs this assembly to match original fit, function, and performance for the listed applications. It is a standard replacement steering component intended for direct service on the specified vehicle years and models.
Vehicle Fitment
- Fits 1964-1972 Buick Skylark, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Chevrolet El Camino, N/A, 7/8 In. Diameter Center Link
- Fits 1970-1972 Chevrolet Monte Carlo, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Oldsmobile Cutlass, N/A, 7/8 In. Diameter Center Link
- Fits 1967-1972 Oldsmobile Cutlass Supreme, N/A, 7/8 In. Diameter Center Link
- Fits 1969-1972 Pontiac Grand Prix, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Pontiac GTO, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1972 Pontiac LeMans, N/A, 7/8 In. Diameter Center Link
- Fits 1964-1970 Pontiac Tempest, N/A, 7/8 In. Diameter Center Link
- Fits 1964 Chevrolet Malibu, N/A, 7/8 In. Diameter Center Link
