Dorman 541-391 Steering Pitman Arm
Dorman 541-391 Steering Pitman Arm
Dorman 541-391 is a steering pitman arm built as a direct replacement for select Chevrolet, GMC, and Cadillac trucks and SUVs. It is precision-engineered and tested for dependable steering linkage service on applications such as the Chevrolet C1500, GMC K1500, and Tahoe.
Key Features
- Steel construction with a coated black finish for durable service
- 36-spline design with a 28 mm steering shaft diameter
- 9/16 in. center link end attachment with 18 pitch thread size
- Pre-greased design with grease fitting included for serviceability
- Castle nut, cotter pin, and mounting hardware included
- Standard ride height replacement for select GM steering systems
- End 1: spline mounting hole; End 2: male taper
Detailed Description
This steering pitman arm is designed for vehicles that use a steering gear-to-center link connection in the front suspension. Dorman 541-391 is a steel, coated replacement part with a pre-greased bearing design and metal bearing type, helping restore steering linkage geometry on compatible Chevrolet C1500, GMC C2500, and Cadillac Escalade applications. It cross-references MOOG Chassis Products K6335 for the same application.
Use this part when servicing steering systems on 1988-2000 Chevrolet and GMC trucks, including C1500, K1500, C2500, K2500, C3500, and related Suburban and Yukon models, plus 1992-2000 GMC Yukon and 1999-2000 Cadillac Escalade. The part number 541-391 is also referenced in interchange listings for select aftermarket replacement catalogs.
What It Helps Address
- Excessive steering play caused by a worn pitman arm
- Loose or inconsistent steering response at the steering gear
- Clunking or movement in the steering linkage
- Wear at the center link connection point
- Service replacement needs on high-mileage GM steering systems
Installation Notes and Tips
Verify spline count, steering shaft diameter, and center link attachment dimensions before installation. This pitman arm is for standard ride height applications and is listed for vehicles with independent front suspension where noted in the fitment data. Use the included castle nut and cotter pin during installation, and confirm proper torque and steering alignment after service. For best results, inspect related steering components such as the idler arm, center link, and tie rod ends at the same time.
Quality Assurance
Dorman manufactures this replacement pitman arm as a precision-engineered component and subjects it to rigorous testing for reliable fit and function on the listed vehicles. The design uses steel construction, a coated finish, and serviceable grease provisions to support long-term steering system maintenance.
Compatible Vehicles
- Fits 1999-2000 Cadillac Escalade, N/A
- Fits 1988-2000 Chevrolet C2500, N/A
- Fits 1988-2000 Chevrolet C3500, N/A; w/Independent Front Suspension
- Fits 1988-2000 Chevrolet K2500, N/A
- Fits 1988-2000 Chevrolet K3500, N/A
- Fits 1995-2000 Chevrolet Tahoe, N/A
- Fits 1988-2000 GMC C2500, N/A
- Fits 1988-2000 GMC C3500, N/A; w/Independent Front Suspension
- Fits 1988-2000 GMC K2500, N/A
- Fits 1988-2000 GMC K3500, N/A
- Fits 1992-2000 GMC Yukon, N/A
- Fits 1988-1999 Chevrolet C1500, N/A
- Fits 1992-1999 Chevrolet C1500 Suburban, N/A
- Fits 1992-1999 Chevrolet C2500 Suburban, N/A
- Fits 1988-1999 Chevrolet K1500, N/A
- Fits 1992-1999 Chevrolet K1500 Suburban, N/A
- Fits 1992-1999 Chevrolet K2500 Suburban, N/A
- Fits 1995-1999 Chevrolet Silverado, N/A
- Fits 1988-1999 GMC C1500, N/A
- Fits 1992-1999 GMC C1500 Suburban, N/A
- Fits 1992-1999 GMC C2500 Suburban, N/A
- Fits 1988-1999 GMC K1500, N/A
- Fits 1992-1999 GMC K1500 Suburban, N/A
- Fits 1992-1999 GMC K2500 Suburban, N/A
- Fits 1992-1994 Chevrolet Blazer, N/A
Dorman 541-391 Steering Pitman Arm
Dorman 541-391 Steering Pitman Arm
Dorman 541-391 is a steering pitman arm built as a direct replacement for select Chevrolet, GMC, and Cadillac trucks and SUVs. It is precision-engineered and tested for dependable steering linkage service on applications such as the Chevrolet C1500, GMC K1500, and Tahoe.
Key Features
- Steel construction with a coated black finish for durable service
- 36-spline design with a 28 mm steering shaft diameter
- 9/16 in. center link end attachment with 18 pitch thread size
- Pre-greased design with grease fitting included for serviceability
- Castle nut, cotter pin, and mounting hardware included
- Standard ride height replacement for select GM steering systems
- End 1: spline mounting hole; End 2: male taper
Detailed Description
This steering pitman arm is designed for vehicles that use a steering gear-to-center link connection in the front suspension. Dorman 541-391 is a steel, coated replacement part with a pre-greased bearing design and metal bearing type, helping restore steering linkage geometry on compatible Chevrolet C1500, GMC C2500, and Cadillac Escalade applications. It cross-references MOOG Chassis Products K6335 for the same application.
Use this part when servicing steering systems on 1988-2000 Chevrolet and GMC trucks, including C1500, K1500, C2500, K2500, C3500, and related Suburban and Yukon models, plus 1992-2000 GMC Yukon and 1999-2000 Cadillac Escalade. The part number 541-391 is also referenced in interchange listings for select aftermarket replacement catalogs.
What It Helps Address
- Excessive steering play caused by a worn pitman arm
- Loose or inconsistent steering response at the steering gear
- Clunking or movement in the steering linkage
- Wear at the center link connection point
- Service replacement needs on high-mileage GM steering systems
Installation Notes and Tips
Verify spline count, steering shaft diameter, and center link attachment dimensions before installation. This pitman arm is for standard ride height applications and is listed for vehicles with independent front suspension where noted in the fitment data. Use the included castle nut and cotter pin during installation, and confirm proper torque and steering alignment after service. For best results, inspect related steering components such as the idler arm, center link, and tie rod ends at the same time.
Quality Assurance
Dorman manufactures this replacement pitman arm as a precision-engineered component and subjects it to rigorous testing for reliable fit and function on the listed vehicles. The design uses steel construction, a coated finish, and serviceable grease provisions to support long-term steering system maintenance.
Compatible Vehicles
- Fits 1999-2000 Cadillac Escalade, N/A
- Fits 1988-2000 Chevrolet C2500, N/A
- Fits 1988-2000 Chevrolet C3500, N/A; w/Independent Front Suspension
- Fits 1988-2000 Chevrolet K2500, N/A
- Fits 1988-2000 Chevrolet K3500, N/A
- Fits 1995-2000 Chevrolet Tahoe, N/A
- Fits 1988-2000 GMC C2500, N/A
- Fits 1988-2000 GMC C3500, N/A; w/Independent Front Suspension
- Fits 1988-2000 GMC K2500, N/A
- Fits 1988-2000 GMC K3500, N/A
- Fits 1992-2000 GMC Yukon, N/A
- Fits 1988-1999 Chevrolet C1500, N/A
- Fits 1992-1999 Chevrolet C1500 Suburban, N/A
- Fits 1992-1999 Chevrolet C2500 Suburban, N/A
- Fits 1988-1999 Chevrolet K1500, N/A
- Fits 1992-1999 Chevrolet K1500 Suburban, N/A
- Fits 1992-1999 Chevrolet K2500 Suburban, N/A
- Fits 1995-1999 Chevrolet Silverado, N/A
- Fits 1988-1999 GMC C1500, N/A
- Fits 1992-1999 GMC C1500 Suburban, N/A
- Fits 1992-1999 GMC C2500 Suburban, N/A
- Fits 1988-1999 GMC K1500, N/A
- Fits 1992-1999 GMC K1500 Suburban, N/A
- Fits 1992-1999 GMC K2500 Suburban, N/A
- Fits 1992-1994 Chevrolet Blazer, N/A
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 541-391 Steering Pitman Arm
Dorman 541-391 is a steering pitman arm built as a direct replacement for select Chevrolet, GMC, and Cadillac trucks and SUVs. It is precision-engineered and tested for dependable steering linkage service on applications such as the Chevrolet C1500, GMC K1500, and Tahoe.
Key Features
- Steel construction with a coated black finish for durable service
- 36-spline design with a 28 mm steering shaft diameter
- 9/16 in. center link end attachment with 18 pitch thread size
- Pre-greased design with grease fitting included for serviceability
- Castle nut, cotter pin, and mounting hardware included
- Standard ride height replacement for select GM steering systems
- End 1: spline mounting hole; End 2: male taper
Detailed Description
This steering pitman arm is designed for vehicles that use a steering gear-to-center link connection in the front suspension. Dorman 541-391 is a steel, coated replacement part with a pre-greased bearing design and metal bearing type, helping restore steering linkage geometry on compatible Chevrolet C1500, GMC C2500, and Cadillac Escalade applications. It cross-references MOOG Chassis Products K6335 for the same application.
Use this part when servicing steering systems on 1988-2000 Chevrolet and GMC trucks, including C1500, K1500, C2500, K2500, C3500, and related Suburban and Yukon models, plus 1992-2000 GMC Yukon and 1999-2000 Cadillac Escalade. The part number 541-391 is also referenced in interchange listings for select aftermarket replacement catalogs.
What It Helps Address
- Excessive steering play caused by a worn pitman arm
- Loose or inconsistent steering response at the steering gear
- Clunking or movement in the steering linkage
- Wear at the center link connection point
- Service replacement needs on high-mileage GM steering systems
Installation Notes and Tips
Verify spline count, steering shaft diameter, and center link attachment dimensions before installation. This pitman arm is for standard ride height applications and is listed for vehicles with independent front suspension where noted in the fitment data. Use the included castle nut and cotter pin during installation, and confirm proper torque and steering alignment after service. For best results, inspect related steering components such as the idler arm, center link, and tie rod ends at the same time.
Quality Assurance
Dorman manufactures this replacement pitman arm as a precision-engineered component and subjects it to rigorous testing for reliable fit and function on the listed vehicles. The design uses steel construction, a coated finish, and serviceable grease provisions to support long-term steering system maintenance.
Compatible Vehicles
- Fits 1999-2000 Cadillac Escalade, N/A
- Fits 1988-2000 Chevrolet C2500, N/A
- Fits 1988-2000 Chevrolet C3500, N/A; w/Independent Front Suspension
- Fits 1988-2000 Chevrolet K2500, N/A
- Fits 1988-2000 Chevrolet K3500, N/A
- Fits 1995-2000 Chevrolet Tahoe, N/A
- Fits 1988-2000 GMC C2500, N/A
- Fits 1988-2000 GMC C3500, N/A; w/Independent Front Suspension
- Fits 1988-2000 GMC K2500, N/A
- Fits 1988-2000 GMC K3500, N/A
- Fits 1992-2000 GMC Yukon, N/A
- Fits 1988-1999 Chevrolet C1500, N/A
- Fits 1992-1999 Chevrolet C1500 Suburban, N/A
- Fits 1992-1999 Chevrolet C2500 Suburban, N/A
- Fits 1988-1999 Chevrolet K1500, N/A
- Fits 1992-1999 Chevrolet K1500 Suburban, N/A
- Fits 1992-1999 Chevrolet K2500 Suburban, N/A
- Fits 1995-1999 Chevrolet Silverado, N/A
- Fits 1988-1999 GMC C1500, N/A
- Fits 1992-1999 GMC C1500 Suburban, N/A
- Fits 1992-1999 GMC C2500 Suburban, N/A
- Fits 1988-1999 GMC K1500, N/A
- Fits 1992-1999 GMC K1500 Suburban, N/A
- Fits 1992-1999 GMC K2500 Suburban, N/A
- Fits 1992-1994 Chevrolet Blazer, N/A
