Dorman 541-552 Rack and Pinion Bellows Kit - Left or Right
Dorman Rack and Pinion Bellows Kit 541-552
Dorman 541-552 is a standard replacement rack and pinion bellows kit for specific Subaru steering applications. It is precision-engineered and tested to match the original part’s function on compatible vehicles, including Subaru Legacy, Outback, Baja, and Impreza models.
- Standard replacement rack and pinion bellows kit
- Specific fit for select Subaru steering systems
- Rubber bellows construction with coated finish
- Bellows length: 7.22 in.
- 12-rib design for OE-style coverage
- End 1 inside diameter: 0.35 in.; end 2 inside diameter: 1.76 in.
- End 1 outside diameter: 0.507 in.; end 2 outside diameter: 1.921 in.
- Mounting hole attachment at both ends
- Black exterior finish
Fitment Details
- Fits 2003-2004 Subaru Legacy, right.
- Fits 1996-1998 Subaru Legacy, right.
- Fits 1992-1993 Subaru Legacy, right.
- Fits 1990 Subaru Legacy, right.
- Fits 2004 Subaru Outback, right.
- Fits 2000 Subaru Outback, right.
- Fits 2003 Subaru Baja, right.
- Fits 2001-2003 Subaru Outback, left.
- Fits 1999-2002 Subaru Legacy, left.
- Fits 1994-1995 Subaru Legacy, left.
- Fits 1991 Subaru Legacy, left.
- Fits 1997 Subaru Impreza, left, to 6/97.
- Fits 1996 Subaru Impreza, left.
- Fits 1993-1995 Subaru Impreza, right.
Detailed Description
This Dorman rack and pinion bellows kit helps restore the protective boot between the steering rack and tie rod area on select Subaru Legacy, Outback, Baja, and Impreza vehicles. The rubber bellows design and coated exterior are built for direct replacement use, while the specific-fit layout supports the original steering geometry on the listed left- and right-side applications. Part number 541-552 is also referenced in steering repair searches for Subaru Legacy and Subaru Outback rack and pinion bellows replacement.
This part cross-references MOOG Chassis Products K9446 for the same application.
What It Helps Address
- Cracked or torn steering rack bellows
- Contamination entering the rack and pinion area
- Loss of protection around the steering gear boot
- Wear-related boot replacement during steering service
- Fitment-specific repair needs on Subaru Legacy, Outback, Baja, and Impreza models
Installation Notes and Tips
Verify side-specific fitment before installation, since this part is listed for both left and right positions depending on vehicle year and model. Confirm the bellows dimensions and attachment style match the original component on your Subaru Legacy, Outback, Baja, or Impreza. Inspect the steering rack, tie rod ends, and surrounding seals during service to ensure the replacement boot is installed on a clean, undamaged assembly.
Quality Assurance
Dorman states that this rack and pinion bellows kit is precision-engineered and rigorously tested for reliable replacement performance on the specified vehicles. It is a standard replacement part built for direct-fit service on the listed Subaru applications.
Original: $30.34
-65%$30.34
$10.62Dorman 541-552 Rack and Pinion Bellows Kit - Left or Right
Dorman Rack and Pinion Bellows Kit 541-552
Dorman 541-552 is a standard replacement rack and pinion bellows kit for specific Subaru steering applications. It is precision-engineered and tested to match the original part’s function on compatible vehicles, including Subaru Legacy, Outback, Baja, and Impreza models.
- Standard replacement rack and pinion bellows kit
- Specific fit for select Subaru steering systems
- Rubber bellows construction with coated finish
- Bellows length: 7.22 in.
- 12-rib design for OE-style coverage
- End 1 inside diameter: 0.35 in.; end 2 inside diameter: 1.76 in.
- End 1 outside diameter: 0.507 in.; end 2 outside diameter: 1.921 in.
- Mounting hole attachment at both ends
- Black exterior finish
Fitment Details
- Fits 2003-2004 Subaru Legacy, right.
- Fits 1996-1998 Subaru Legacy, right.
- Fits 1992-1993 Subaru Legacy, right.
- Fits 1990 Subaru Legacy, right.
- Fits 2004 Subaru Outback, right.
- Fits 2000 Subaru Outback, right.
- Fits 2003 Subaru Baja, right.
- Fits 2001-2003 Subaru Outback, left.
- Fits 1999-2002 Subaru Legacy, left.
- Fits 1994-1995 Subaru Legacy, left.
- Fits 1991 Subaru Legacy, left.
- Fits 1997 Subaru Impreza, left, to 6/97.
- Fits 1996 Subaru Impreza, left.
- Fits 1993-1995 Subaru Impreza, right.
Detailed Description
This Dorman rack and pinion bellows kit helps restore the protective boot between the steering rack and tie rod area on select Subaru Legacy, Outback, Baja, and Impreza vehicles. The rubber bellows design and coated exterior are built for direct replacement use, while the specific-fit layout supports the original steering geometry on the listed left- and right-side applications. Part number 541-552 is also referenced in steering repair searches for Subaru Legacy and Subaru Outback rack and pinion bellows replacement.
This part cross-references MOOG Chassis Products K9446 for the same application.
What It Helps Address
- Cracked or torn steering rack bellows
- Contamination entering the rack and pinion area
- Loss of protection around the steering gear boot
- Wear-related boot replacement during steering service
- Fitment-specific repair needs on Subaru Legacy, Outback, Baja, and Impreza models
Installation Notes and Tips
Verify side-specific fitment before installation, since this part is listed for both left and right positions depending on vehicle year and model. Confirm the bellows dimensions and attachment style match the original component on your Subaru Legacy, Outback, Baja, or Impreza. Inspect the steering rack, tie rod ends, and surrounding seals during service to ensure the replacement boot is installed on a clean, undamaged assembly.
Quality Assurance
Dorman states that this rack and pinion bellows kit is precision-engineered and rigorously tested for reliable replacement performance on the specified vehicles. It is a standard replacement part built for direct-fit service on the listed Subaru applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman Rack and Pinion Bellows Kit 541-552
Dorman 541-552 is a standard replacement rack and pinion bellows kit for specific Subaru steering applications. It is precision-engineered and tested to match the original part’s function on compatible vehicles, including Subaru Legacy, Outback, Baja, and Impreza models.
- Standard replacement rack and pinion bellows kit
- Specific fit for select Subaru steering systems
- Rubber bellows construction with coated finish
- Bellows length: 7.22 in.
- 12-rib design for OE-style coverage
- End 1 inside diameter: 0.35 in.; end 2 inside diameter: 1.76 in.
- End 1 outside diameter: 0.507 in.; end 2 outside diameter: 1.921 in.
- Mounting hole attachment at both ends
- Black exterior finish
Fitment Details
- Fits 2003-2004 Subaru Legacy, right.
- Fits 1996-1998 Subaru Legacy, right.
- Fits 1992-1993 Subaru Legacy, right.
- Fits 1990 Subaru Legacy, right.
- Fits 2004 Subaru Outback, right.
- Fits 2000 Subaru Outback, right.
- Fits 2003 Subaru Baja, right.
- Fits 2001-2003 Subaru Outback, left.
- Fits 1999-2002 Subaru Legacy, left.
- Fits 1994-1995 Subaru Legacy, left.
- Fits 1991 Subaru Legacy, left.
- Fits 1997 Subaru Impreza, left, to 6/97.
- Fits 1996 Subaru Impreza, left.
- Fits 1993-1995 Subaru Impreza, right.
Detailed Description
This Dorman rack and pinion bellows kit helps restore the protective boot between the steering rack and tie rod area on select Subaru Legacy, Outback, Baja, and Impreza vehicles. The rubber bellows design and coated exterior are built for direct replacement use, while the specific-fit layout supports the original steering geometry on the listed left- and right-side applications. Part number 541-552 is also referenced in steering repair searches for Subaru Legacy and Subaru Outback rack and pinion bellows replacement.
This part cross-references MOOG Chassis Products K9446 for the same application.
What It Helps Address
- Cracked or torn steering rack bellows
- Contamination entering the rack and pinion area
- Loss of protection around the steering gear boot
- Wear-related boot replacement during steering service
- Fitment-specific repair needs on Subaru Legacy, Outback, Baja, and Impreza models
Installation Notes and Tips
Verify side-specific fitment before installation, since this part is listed for both left and right positions depending on vehicle year and model. Confirm the bellows dimensions and attachment style match the original component on your Subaru Legacy, Outback, Baja, or Impreza. Inspect the steering rack, tie rod ends, and surrounding seals during service to ensure the replacement boot is installed on a clean, undamaged assembly.
Quality Assurance
Dorman states that this rack and pinion bellows kit is precision-engineered and rigorously tested for reliable replacement performance on the specified vehicles. It is a standard replacement part built for direct-fit service on the listed Subaru applications.
