Dorman 541-814 Suspension Stabilizer Bar Link Kit - Front
Front Stabilizer Bar Link Kit for BMW and Mini
Dorman 541-814 is a front suspension stabilizer bar link kit built as a standard replacement for the original equipment on select BMW and Mini vehicles. It is precision-engineered and tested for reliable fit and function, with a coated finish, polymer bearing material, pre-greased construction, and greaseable service points.
Compatible with front suspension applications on BMW 118i, 128ti, 220i Gran Coupe, 228i Gran Coupe, 228i xDrive Gran Coupe, M135i, M235i xDrive Gran Coupe, X1, X2, and 220i, as well as Mini Cooper Clubman and Cooper Countryman. Part number 541-814 is a direct-fit suspension stabilizer bar link kit for vehicles that use male-threaded ends and 10 mm attachment sizes.
Key Features
- Front suspension stabilizer bar link kit for select BMW and Mini models
- Standard replacement design for OE-style fit and function
- Pre-greased and greaseable construction for serviceability
- Male-threaded ends with 10 mm end attachment size
- Coated finish for added surface protection
- Polymer bearing material with bearings and locking nuts included
- Dust boot included; bushings, washers, bolts, and sleeve not included
Detailed Description
Dorman 541-814 is engineered for the front suspension and is built to replace the original stabilizer bar link on specific BMW and Mini applications. The link measures 135.5 in length and uses a 1.5 mm bolt thread pitch with a 10 mm center bolt head size. Its coated exterior, polymer bearing material, and greaseable design support consistent operation in the sway bar connection point. This part cross-references MOOG Chassis Products K750861 for the same application.
Common Problems This Part Can Address
- Clunking or rattling from the front suspension over bumps
- Excessive play in the stabilizer bar connection
- Worn or damaged OE link hardware on BMW X1, BMW X2, or Mini Countryman front suspension
- Uneven handling response caused by a loose sway bar link
- Service issues related to a deteriorated front stabilizer bar link assembly
Installation Notes and Tips
Install on the front suspension only. Verify vehicle application by year, make, and model before ordering, especially for BMW 118i 2020-2024, BMW 128ti 2022-2024, BMW 220i Gran Coupe 2022-2024, BMW 228i Gran Coupe 2021-2024, BMW 228i xDrive Gran Coupe 2020-2024, BMW M135i 2020-2024, BMW M235i xDrive Gran Coupe 2020-2024, BMW X1 2016-2024, BMW X2 2018-2023, BMW 220i 2016-2019, Mini Cooper Clubman 2016-2024, and Mini Cooper Countryman 2017-2024. Confirm the 10 mm attachment size and male-threaded end configuration during service.
Quality Assurance
Dorman designs this stabilizer bar link kit as a precision-engineered replacement and subjects it to rigorous testing to support reliable OE-style performance on the listed applications.
Dorman 541-814 Suspension Stabilizer Bar Link Kit - Front
Front Stabilizer Bar Link Kit for BMW and Mini
Dorman 541-814 is a front suspension stabilizer bar link kit built as a standard replacement for the original equipment on select BMW and Mini vehicles. It is precision-engineered and tested for reliable fit and function, with a coated finish, polymer bearing material, pre-greased construction, and greaseable service points.
Compatible with front suspension applications on BMW 118i, 128ti, 220i Gran Coupe, 228i Gran Coupe, 228i xDrive Gran Coupe, M135i, M235i xDrive Gran Coupe, X1, X2, and 220i, as well as Mini Cooper Clubman and Cooper Countryman. Part number 541-814 is a direct-fit suspension stabilizer bar link kit for vehicles that use male-threaded ends and 10 mm attachment sizes.
Key Features
- Front suspension stabilizer bar link kit for select BMW and Mini models
- Standard replacement design for OE-style fit and function
- Pre-greased and greaseable construction for serviceability
- Male-threaded ends with 10 mm end attachment size
- Coated finish for added surface protection
- Polymer bearing material with bearings and locking nuts included
- Dust boot included; bushings, washers, bolts, and sleeve not included
Detailed Description
Dorman 541-814 is engineered for the front suspension and is built to replace the original stabilizer bar link on specific BMW and Mini applications. The link measures 135.5 in length and uses a 1.5 mm bolt thread pitch with a 10 mm center bolt head size. Its coated exterior, polymer bearing material, and greaseable design support consistent operation in the sway bar connection point. This part cross-references MOOG Chassis Products K750861 for the same application.
Common Problems This Part Can Address
- Clunking or rattling from the front suspension over bumps
- Excessive play in the stabilizer bar connection
- Worn or damaged OE link hardware on BMW X1, BMW X2, or Mini Countryman front suspension
- Uneven handling response caused by a loose sway bar link
- Service issues related to a deteriorated front stabilizer bar link assembly
Installation Notes and Tips
Install on the front suspension only. Verify vehicle application by year, make, and model before ordering, especially for BMW 118i 2020-2024, BMW 128ti 2022-2024, BMW 220i Gran Coupe 2022-2024, BMW 228i Gran Coupe 2021-2024, BMW 228i xDrive Gran Coupe 2020-2024, BMW M135i 2020-2024, BMW M235i xDrive Gran Coupe 2020-2024, BMW X1 2016-2024, BMW X2 2018-2023, BMW 220i 2016-2019, Mini Cooper Clubman 2016-2024, and Mini Cooper Countryman 2017-2024. Confirm the 10 mm attachment size and male-threaded end configuration during service.
Quality Assurance
Dorman designs this stabilizer bar link kit as a precision-engineered replacement and subjects it to rigorous testing to support reliable OE-style performance on the listed applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Front Stabilizer Bar Link Kit for BMW and Mini
Dorman 541-814 is a front suspension stabilizer bar link kit built as a standard replacement for the original equipment on select BMW and Mini vehicles. It is precision-engineered and tested for reliable fit and function, with a coated finish, polymer bearing material, pre-greased construction, and greaseable service points.
Compatible with front suspension applications on BMW 118i, 128ti, 220i Gran Coupe, 228i Gran Coupe, 228i xDrive Gran Coupe, M135i, M235i xDrive Gran Coupe, X1, X2, and 220i, as well as Mini Cooper Clubman and Cooper Countryman. Part number 541-814 is a direct-fit suspension stabilizer bar link kit for vehicles that use male-threaded ends and 10 mm attachment sizes.
Key Features
- Front suspension stabilizer bar link kit for select BMW and Mini models
- Standard replacement design for OE-style fit and function
- Pre-greased and greaseable construction for serviceability
- Male-threaded ends with 10 mm end attachment size
- Coated finish for added surface protection
- Polymer bearing material with bearings and locking nuts included
- Dust boot included; bushings, washers, bolts, and sleeve not included
Detailed Description
Dorman 541-814 is engineered for the front suspension and is built to replace the original stabilizer bar link on specific BMW and Mini applications. The link measures 135.5 in length and uses a 1.5 mm bolt thread pitch with a 10 mm center bolt head size. Its coated exterior, polymer bearing material, and greaseable design support consistent operation in the sway bar connection point. This part cross-references MOOG Chassis Products K750861 for the same application.
Common Problems This Part Can Address
- Clunking or rattling from the front suspension over bumps
- Excessive play in the stabilizer bar connection
- Worn or damaged OE link hardware on BMW X1, BMW X2, or Mini Countryman front suspension
- Uneven handling response caused by a loose sway bar link
- Service issues related to a deteriorated front stabilizer bar link assembly
Installation Notes and Tips
Install on the front suspension only. Verify vehicle application by year, make, and model before ordering, especially for BMW 118i 2020-2024, BMW 128ti 2022-2024, BMW 220i Gran Coupe 2022-2024, BMW 228i Gran Coupe 2021-2024, BMW 228i xDrive Gran Coupe 2020-2024, BMW M135i 2020-2024, BMW M235i xDrive Gran Coupe 2020-2024, BMW X1 2016-2024, BMW X2 2018-2023, BMW 220i 2016-2019, Mini Cooper Clubman 2016-2024, and Mini Cooper Countryman 2017-2024. Confirm the 10 mm attachment size and male-threaded end configuration during service.
Quality Assurance
Dorman designs this stabilizer bar link kit as a precision-engineered replacement and subjects it to rigorous testing to support reliable OE-style performance on the listed applications.
