Dorman 541-838 Suspension Stabilizer Bar Link Kit - Front
Dorman 541-838 Rear Stabilizer Bar Link Kit
Dorman 541-838 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific vehicles. It is precision-engineered and tested for dependable service, with threaded ends, coated steel construction, and greaseable metal bearings for maintenance-friendly operation.
Key Features
- Rear suspension stabilizer bar link kit for OE-style replacement
- Threaded end connections with 14 mm attachment sizes
- Steel link material with coated finish for added corrosion resistance
- Metal bearing material with grease fittings included
- Dust boot included to help protect internal components
- Locking nuts included for secure installation
- Standard replacement grade for direct service use
- Cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application
Detailed Description
This Dorman stabilizer bar link is engineered for rear suspension service where a worn or noisy sway bar link needs replacement. The steel construction, threaded ends, and greaseable design support consistent articulation at the stabilizer bar connection, while the coated finish and dust boot help protect the assembly in everyday driving conditions. Dorman 541-838 is a practical choice for drivers searching for a rear sway bar link replacement for specific Honda Civic and Acura Integra applications, including OE-style service on vehicles that use 14 mm end attachments.
For buyers comparing suspension stabilizer bar link kit options, this part number 541-838 is built to restore the stabilizer bar connection point without unnecessary components. It is listed as a rear suspension part and is not adjustable, making it a straightforward replacement for the original configuration.
What It Helps Address
- Clunking or rattling from the rear suspension over bumps
- Excessive play in the stabilizer bar connection
- Worn or damaged rear sway bar link hardware
- Reduced suspension stability caused by a loose link assembly
- Service needs on Honda Civic and Acura Integra rear suspension systems
Installation Notes and Tips
Verify rear suspension application, threaded end style, and 14 mm attachment size before installation. Because this link uses locking nuts and grease fittings, inspect the mating stabilizer bar and mounting points for wear, corrosion, or damage before assembly. Confirm the vehicle’s rear suspension configuration matches the application requirements for Dorman 541-838 and follow the service procedure for the specific Honda Civic or Acura Integra model being repaired.
Quality Assurance
Dorman designs this stabilizer bar link kit as a standard replacement part and subjects it to testing to support reliable OE-style service on the specified applications. The coated steel construction, metal bearings, greaseable design, and included dust boot reflect a focus on durability and serviceability for rear suspension repair.
Dorman 541-838 Suspension Stabilizer Bar Link Kit - Front
Dorman 541-838 Rear Stabilizer Bar Link Kit
Dorman 541-838 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific vehicles. It is precision-engineered and tested for dependable service, with threaded ends, coated steel construction, and greaseable metal bearings for maintenance-friendly operation.
Key Features
- Rear suspension stabilizer bar link kit for OE-style replacement
- Threaded end connections with 14 mm attachment sizes
- Steel link material with coated finish for added corrosion resistance
- Metal bearing material with grease fittings included
- Dust boot included to help protect internal components
- Locking nuts included for secure installation
- Standard replacement grade for direct service use
- Cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application
Detailed Description
This Dorman stabilizer bar link is engineered for rear suspension service where a worn or noisy sway bar link needs replacement. The steel construction, threaded ends, and greaseable design support consistent articulation at the stabilizer bar connection, while the coated finish and dust boot help protect the assembly in everyday driving conditions. Dorman 541-838 is a practical choice for drivers searching for a rear sway bar link replacement for specific Honda Civic and Acura Integra applications, including OE-style service on vehicles that use 14 mm end attachments.
For buyers comparing suspension stabilizer bar link kit options, this part number 541-838 is built to restore the stabilizer bar connection point without unnecessary components. It is listed as a rear suspension part and is not adjustable, making it a straightforward replacement for the original configuration.
What It Helps Address
- Clunking or rattling from the rear suspension over bumps
- Excessive play in the stabilizer bar connection
- Worn or damaged rear sway bar link hardware
- Reduced suspension stability caused by a loose link assembly
- Service needs on Honda Civic and Acura Integra rear suspension systems
Installation Notes and Tips
Verify rear suspension application, threaded end style, and 14 mm attachment size before installation. Because this link uses locking nuts and grease fittings, inspect the mating stabilizer bar and mounting points for wear, corrosion, or damage before assembly. Confirm the vehicle’s rear suspension configuration matches the application requirements for Dorman 541-838 and follow the service procedure for the specific Honda Civic or Acura Integra model being repaired.
Quality Assurance
Dorman designs this stabilizer bar link kit as a standard replacement part and subjects it to testing to support reliable OE-style service on the specified applications. The coated steel construction, metal bearings, greaseable design, and included dust boot reflect a focus on durability and serviceability for rear suspension repair.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 541-838 Rear Stabilizer Bar Link Kit
Dorman 541-838 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific vehicles. It is precision-engineered and tested for dependable service, with threaded ends, coated steel construction, and greaseable metal bearings for maintenance-friendly operation.
Key Features
- Rear suspension stabilizer bar link kit for OE-style replacement
- Threaded end connections with 14 mm attachment sizes
- Steel link material with coated finish for added corrosion resistance
- Metal bearing material with grease fittings included
- Dust boot included to help protect internal components
- Locking nuts included for secure installation
- Standard replacement grade for direct service use
- Cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application
Detailed Description
This Dorman stabilizer bar link is engineered for rear suspension service where a worn or noisy sway bar link needs replacement. The steel construction, threaded ends, and greaseable design support consistent articulation at the stabilizer bar connection, while the coated finish and dust boot help protect the assembly in everyday driving conditions. Dorman 541-838 is a practical choice for drivers searching for a rear sway bar link replacement for specific Honda Civic and Acura Integra applications, including OE-style service on vehicles that use 14 mm end attachments.
For buyers comparing suspension stabilizer bar link kit options, this part number 541-838 is built to restore the stabilizer bar connection point without unnecessary components. It is listed as a rear suspension part and is not adjustable, making it a straightforward replacement for the original configuration.
What It Helps Address
- Clunking or rattling from the rear suspension over bumps
- Excessive play in the stabilizer bar connection
- Worn or damaged rear sway bar link hardware
- Reduced suspension stability caused by a loose link assembly
- Service needs on Honda Civic and Acura Integra rear suspension systems
Installation Notes and Tips
Verify rear suspension application, threaded end style, and 14 mm attachment size before installation. Because this link uses locking nuts and grease fittings, inspect the mating stabilizer bar and mounting points for wear, corrosion, or damage before assembly. Confirm the vehicle’s rear suspension configuration matches the application requirements for Dorman 541-838 and follow the service procedure for the specific Honda Civic or Acura Integra model being repaired.
Quality Assurance
Dorman designs this stabilizer bar link kit as a standard replacement part and subjects it to testing to support reliable OE-style service on the specified applications. The coated steel construction, metal bearings, greaseable design, and included dust boot reflect a focus on durability and serviceability for rear suspension repair.
