Dorman 541-859 Suspension Stabilizer Bar Link Kit - Front
Dorman 541-859 Front Stabilizer Link
Dorman 541-859 is a front suspension stabilizer bar link kit built as a direct replacement for the original equipment on select Jaguar models. It is precision-engineered and tested for reliable fitment on the front suspension of Jaguar XK8, XKR, XJ8, XJR, and Vanden Plas applications with the steel version noted in the fitment data.
- Front stabilizer bar link kit for select Jaguar suspension applications
- Direct replacement for OE-style fit and function
- Threaded end design with male threaded connection
- Greaseable design with grease fittings included
- Polymer bearing material and rubber bushings
- Dust boot and locking nuts included
- Standard replacement grade
- Part number: 541-859
Application Details
This suspension stabilizer bar link kit is designed for front suspension service on 1997-2006 Jaguar XK8, front; 2000-2006 Jaguar XKR, front; and 1998 Jaguar Vanden Plas, XJ8, and XJR, front, all listed as steel version applications. If you are searching for a front sway bar link for a Jaguar XK8 or a front stabilizer link for a Jaguar XKR, Dorman 541-859 matches the vehicle-specific OE layout.
The link uses a threaded end and male threaded end with 14 mm attachment sizes and M12 thread pitch. It also features black rubber bushings, a 31 mm bushing outside diameter, and a 10.4 mm bushing inside diameter. The greaseable construction and included grease fittings support serviceability, while the dust boot helps protect the joint area from road contamination. This part cross-references MOOG Chassis Products K750225 for the same application.
Common Problems This Part Can Address
- Front-end clunking or rattling from a worn stabilizer bar link
- Excess body roll caused by looseness in the sway bar connection
- Uneven steering response from degraded suspension linkage
- Noise over bumps from worn bushings or joint wear
- Loss of stabilizer bar control at the front suspension
Installation Notes
Verify the vehicle’s front suspension configuration before ordering, since the fitment data specifies steel version applications. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear before installation. Confirm thread size and attachment dimensions match the original link, and torque fasteners to the vehicle manufacturer’s specifications.
Quality Assurance
Dorman designs this stabilizer bar link kit as a precision replacement and subjects it to testing for dependable OE-style service on the listed Jaguar applications. Part number 541-859 is built for direct replacement use on the specified front suspension fitments.
Dorman 541-859 Suspension Stabilizer Bar Link Kit - Front
Dorman 541-859 Front Stabilizer Link
Dorman 541-859 is a front suspension stabilizer bar link kit built as a direct replacement for the original equipment on select Jaguar models. It is precision-engineered and tested for reliable fitment on the front suspension of Jaguar XK8, XKR, XJ8, XJR, and Vanden Plas applications with the steel version noted in the fitment data.
- Front stabilizer bar link kit for select Jaguar suspension applications
- Direct replacement for OE-style fit and function
- Threaded end design with male threaded connection
- Greaseable design with grease fittings included
- Polymer bearing material and rubber bushings
- Dust boot and locking nuts included
- Standard replacement grade
- Part number: 541-859
Application Details
This suspension stabilizer bar link kit is designed for front suspension service on 1997-2006 Jaguar XK8, front; 2000-2006 Jaguar XKR, front; and 1998 Jaguar Vanden Plas, XJ8, and XJR, front, all listed as steel version applications. If you are searching for a front sway bar link for a Jaguar XK8 or a front stabilizer link for a Jaguar XKR, Dorman 541-859 matches the vehicle-specific OE layout.
The link uses a threaded end and male threaded end with 14 mm attachment sizes and M12 thread pitch. It also features black rubber bushings, a 31 mm bushing outside diameter, and a 10.4 mm bushing inside diameter. The greaseable construction and included grease fittings support serviceability, while the dust boot helps protect the joint area from road contamination. This part cross-references MOOG Chassis Products K750225 for the same application.
Common Problems This Part Can Address
- Front-end clunking or rattling from a worn stabilizer bar link
- Excess body roll caused by looseness in the sway bar connection
- Uneven steering response from degraded suspension linkage
- Noise over bumps from worn bushings or joint wear
- Loss of stabilizer bar control at the front suspension
Installation Notes
Verify the vehicle’s front suspension configuration before ordering, since the fitment data specifies steel version applications. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear before installation. Confirm thread size and attachment dimensions match the original link, and torque fasteners to the vehicle manufacturer’s specifications.
Quality Assurance
Dorman designs this stabilizer bar link kit as a precision replacement and subjects it to testing for dependable OE-style service on the listed Jaguar applications. Part number 541-859 is built for direct replacement use on the specified front suspension fitments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 541-859 Front Stabilizer Link
Dorman 541-859 is a front suspension stabilizer bar link kit built as a direct replacement for the original equipment on select Jaguar models. It is precision-engineered and tested for reliable fitment on the front suspension of Jaguar XK8, XKR, XJ8, XJR, and Vanden Plas applications with the steel version noted in the fitment data.
- Front stabilizer bar link kit for select Jaguar suspension applications
- Direct replacement for OE-style fit and function
- Threaded end design with male threaded connection
- Greaseable design with grease fittings included
- Polymer bearing material and rubber bushings
- Dust boot and locking nuts included
- Standard replacement grade
- Part number: 541-859
Application Details
This suspension stabilizer bar link kit is designed for front suspension service on 1997-2006 Jaguar XK8, front; 2000-2006 Jaguar XKR, front; and 1998 Jaguar Vanden Plas, XJ8, and XJR, front, all listed as steel version applications. If you are searching for a front sway bar link for a Jaguar XK8 or a front stabilizer link for a Jaguar XKR, Dorman 541-859 matches the vehicle-specific OE layout.
The link uses a threaded end and male threaded end with 14 mm attachment sizes and M12 thread pitch. It also features black rubber bushings, a 31 mm bushing outside diameter, and a 10.4 mm bushing inside diameter. The greaseable construction and included grease fittings support serviceability, while the dust boot helps protect the joint area from road contamination. This part cross-references MOOG Chassis Products K750225 for the same application.
Common Problems This Part Can Address
- Front-end clunking or rattling from a worn stabilizer bar link
- Excess body roll caused by looseness in the sway bar connection
- Uneven steering response from degraded suspension linkage
- Noise over bumps from worn bushings or joint wear
- Loss of stabilizer bar control at the front suspension
Installation Notes
Verify the vehicle’s front suspension configuration before ordering, since the fitment data specifies steel version applications. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear before installation. Confirm thread size and attachment dimensions match the original link, and torque fasteners to the vehicle manufacturer’s specifications.
Quality Assurance
Dorman designs this stabilizer bar link kit as a precision replacement and subjects it to testing for dependable OE-style service on the listed Jaguar applications. Part number 541-859 is built for direct replacement use on the specified front suspension fitments.
