Dorman 541-912 Suspension Stabilizer Bar Link Kit - Front Right
Dorman 541-912 Rear Stabilizer Bar Link Kit
Dorman 541-912 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on select Mercedes-Benz vehicles. It is precision-engineered and tested for dependable fitment on the rear suspension, with a coated steel link, polymer bearing material, greaseable design, and dust boot protection.
Compatible with Mercedes-Benz CLS550, CLS63 AMG S, CLS400, E250, E300, E350, E400, E550, E63 AMG S, E63 AMG, and CLS63 AMG applications at the rear suspension. This part number, 541-912, is also cross-referenced to MOOG Chassis Products K750413 for the same application.
Key Features
- Rear stabilizer bar link kit for the front right application listed in fitment data
- Steel link construction with coated finish for corrosion resistance
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and locking nuts included
- Dust boot included to help protect the joint area
- Polymer bearing material for OE-style suspension service
- Standard replacement grade for select Mercedes-Benz models
Detailed Description
Dorman 541-912 is engineered for direct replacement use on specific Mercedes-Benz CLS-Class and E-Class vehicles. It is listed for rear suspension service and is built with male threaded ends, M1.5 bolt thread pitch, and a coated steel link body. The design includes grease fittings, locking nuts, and a dust boot, while omitting adjustable hardware, sleeves, washers, bolts, bushings, and pre-greasing. For shoppers searching for a Mercedes-Benz E350 rear stabilizer bar link, Mercedes-Benz E550 suspension link replacement, or a front right stabilizer link for CLS550 and CLS63 AMG S, this part number provides a fitment-specific solution.
What It Helps Address
- Clunking or rattling from a worn sway bar link
- Excess play in the rear suspension connection
- Uneven stabilizer bar response during cornering
- Noise caused by deteriorated link joints or boots
- Loss of suspension control feel on select Mercedes-Benz models
Installation Notes and Tips
Verify the vehicle position before ordering, since fitment data lists rear suspension service while the application rows specify front right placement. Confirm the end style, 12 mm attachment size, and M1.5 thread pitch against the original part before installation. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear so the new link is installed into a sound assembly.
Quality Assurance
This Dorman suspension stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable OE-style replacement on the listed Mercedes-Benz applications. Part number 541-912 is built to standard replacement specifications for consistent service in the suspension system.
Dorman 541-912 Suspension Stabilizer Bar Link Kit - Front Right
Dorman 541-912 Rear Stabilizer Bar Link Kit
Dorman 541-912 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on select Mercedes-Benz vehicles. It is precision-engineered and tested for dependable fitment on the rear suspension, with a coated steel link, polymer bearing material, greaseable design, and dust boot protection.
Compatible with Mercedes-Benz CLS550, CLS63 AMG S, CLS400, E250, E300, E350, E400, E550, E63 AMG S, E63 AMG, and CLS63 AMG applications at the rear suspension. This part number, 541-912, is also cross-referenced to MOOG Chassis Products K750413 for the same application.
Key Features
- Rear stabilizer bar link kit for the front right application listed in fitment data
- Steel link construction with coated finish for corrosion resistance
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and locking nuts included
- Dust boot included to help protect the joint area
- Polymer bearing material for OE-style suspension service
- Standard replacement grade for select Mercedes-Benz models
Detailed Description
Dorman 541-912 is engineered for direct replacement use on specific Mercedes-Benz CLS-Class and E-Class vehicles. It is listed for rear suspension service and is built with male threaded ends, M1.5 bolt thread pitch, and a coated steel link body. The design includes grease fittings, locking nuts, and a dust boot, while omitting adjustable hardware, sleeves, washers, bolts, bushings, and pre-greasing. For shoppers searching for a Mercedes-Benz E350 rear stabilizer bar link, Mercedes-Benz E550 suspension link replacement, or a front right stabilizer link for CLS550 and CLS63 AMG S, this part number provides a fitment-specific solution.
What It Helps Address
- Clunking or rattling from a worn sway bar link
- Excess play in the rear suspension connection
- Uneven stabilizer bar response during cornering
- Noise caused by deteriorated link joints or boots
- Loss of suspension control feel on select Mercedes-Benz models
Installation Notes and Tips
Verify the vehicle position before ordering, since fitment data lists rear suspension service while the application rows specify front right placement. Confirm the end style, 12 mm attachment size, and M1.5 thread pitch against the original part before installation. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear so the new link is installed into a sound assembly.
Quality Assurance
This Dorman suspension stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable OE-style replacement on the listed Mercedes-Benz applications. Part number 541-912 is built to standard replacement specifications for consistent service in the suspension system.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 541-912 Rear Stabilizer Bar Link Kit
Dorman 541-912 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on select Mercedes-Benz vehicles. It is precision-engineered and tested for dependable fitment on the rear suspension, with a coated steel link, polymer bearing material, greaseable design, and dust boot protection.
Compatible with Mercedes-Benz CLS550, CLS63 AMG S, CLS400, E250, E300, E350, E400, E550, E63 AMG S, E63 AMG, and CLS63 AMG applications at the rear suspension. This part number, 541-912, is also cross-referenced to MOOG Chassis Products K750413 for the same application.
Key Features
- Rear stabilizer bar link kit for the front right application listed in fitment data
- Steel link construction with coated finish for corrosion resistance
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and locking nuts included
- Dust boot included to help protect the joint area
- Polymer bearing material for OE-style suspension service
- Standard replacement grade for select Mercedes-Benz models
Detailed Description
Dorman 541-912 is engineered for direct replacement use on specific Mercedes-Benz CLS-Class and E-Class vehicles. It is listed for rear suspension service and is built with male threaded ends, M1.5 bolt thread pitch, and a coated steel link body. The design includes grease fittings, locking nuts, and a dust boot, while omitting adjustable hardware, sleeves, washers, bolts, bushings, and pre-greasing. For shoppers searching for a Mercedes-Benz E350 rear stabilizer bar link, Mercedes-Benz E550 suspension link replacement, or a front right stabilizer link for CLS550 and CLS63 AMG S, this part number provides a fitment-specific solution.
What It Helps Address
- Clunking or rattling from a worn sway bar link
- Excess play in the rear suspension connection
- Uneven stabilizer bar response during cornering
- Noise caused by deteriorated link joints or boots
- Loss of suspension control feel on select Mercedes-Benz models
Installation Notes and Tips
Verify the vehicle position before ordering, since fitment data lists rear suspension service while the application rows specify front right placement. Confirm the end style, 12 mm attachment size, and M1.5 thread pitch against the original part before installation. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear so the new link is installed into a sound assembly.
Quality Assurance
This Dorman suspension stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable OE-style replacement on the listed Mercedes-Benz applications. Part number 541-912 is built to standard replacement specifications for consistent service in the suspension system.
